Desertcart
Explore
Anmbest Enhanced 3S 11.1V/12V/12.6V 40A 18650 Charger PCB BMS Protection Board Li-ion Lithium Battery Charger Lipo Cell Module for Drill Motor 12.6V

Anmbest Enhanced 3S 11.1V/12V/12.6V 40A 18650 Charger PCB BMS Protection Board Li-ion Lithium Battery Charger Lipo Cell Module for Drill Motor 12.6V

from USA
to UAE
in 5-8 days
At your doorstep by Mar 07  to Mar 10 with standard delivery

Description

  • High-accuracy voltage detection circuit, fine workmanship and durable..
  • Highlight: Over-discharge protection, overcurrent protection, overcharge protection; High charge and discharge current; Compact size and lightweight..
  • Conditions for Starting the Drill: To successful starting the drill requires three 15C-20C power batteries, or six 10C-15C power batteries (ordinary 18650 battery can not start the drill!! Recommended power battery models: SONY VTC4, VTC4A, VTC5A, VTC6). For 0V and 12.6V cables, use copper wire over 3 square millimeters, the shorter the better (can not use nickel plate!!!)..
  • MOS transistor can control the battery charge and discharge, low standby current consumption..
  • Applications: Suitable for electric drill with starting current below 80A and power below 130W. Suitable for lithium batteries with nominal voltage of 3.7V and full voltage of 4.2V (including 18650, 26650, polymer lithium batteries, no size limit)..
  • Imported from USA.
Size:3S Specifications: Charging voltage:12.6v ~ 13.6v Over Charge voltage:4.25±0.05v Over Discharge voltage: 2.5v±0.05v Continuous discharge current (upper limit): 40A (if the cooling environment is not good, please reduce the load current ) Continuous charge current (upper limit): 20A Internal resistance: Less than 100mΩ Working temperature:-40 ~ +50Celsius Storage Temperature:-40 ~ +80Celsius Weight: 8.8g Size:41 mm×55 mm×3.4mm/ 1.61″ ×2.17″×0.13″ Detailed electrical parameters are shown in the picture Suitable for: 1.Suitable for lithium batteries with nominal voltage of 3.7V and full voltage of 4.2V (including 18650, 26650, polymer lithium batteries, no size limit) 2.Suitable for electric drill with starting current below 80A and power below 130W . Attention: To successful starting the drill requires three 15C-20C power batteries, or six 10C-15C power batteries (ordinary 18650 battery can not start the drill!! Recommended power battery models: SONY VTC4, VTC4A, VTC5A, VTC6). 0V and 12.6V cable, use copper wire of more than 3 square millimeters (cannot use nickel plate!!!). Strictly according to the diagram wiring: 0V/4.2V/8.4V/12.6V,Otherwise it will cause damage to the chip. Do not mix the good battery and poor battery to use. The internal resistance of 3 battery capacity are closer will be better. Package inlcuded: 1x 3S 40A lithium Battery Protection Board
Reviews

Anmbest Enhanced 3S 11.1V/12V/12.6V 40A 18650 Charger PCB BMS Protection Board Li-ion Lithium Battery Charger Lipo Cell Module for Drill Motor 12.6V



Similar Products

Related Pages

Disclaimer: The price shown above includes all applicable taxes and fees. The information provided above is for reference purposes only. Products may go out of stock and delivery estimates may change at any time. Desertcart does not validate any claims made in the product descriptions above. For additional information, please contact the manufacturer or desertcart customer service. While desertcart makes reasonable efforts to only show products available in your country, some items may be cancelled if they are prohibited for import in United Arab Emirates. For more details, please visit our Support Page.