Get it to UAE by Oct 24 to Oct 29 with standard delivery.
Repair kit contains complete accessories, allows you to repair damage and scratch in 30 minutes
Alloy wheel repair kit works on the curb damage,scratches,slight dents, installation damages, sanding marks and other damage to wheel
Added value-vibration, carwash resistant.
Easy resistant to 130C.
Permanent repair, Easy maintenance
Imported from UK
1.Preparation: clean the damaged alloy wheel with Alcohol prep pad and remove rough edges and unevenest around the
2.Confirm the repair area. If it is slightly damaged, use wet sandpaper to accommodate the outlines to repaired surface,
and lacquer repair area with alloy silver.
3.If the damage area is large or with dents. Then use the repair adhesive: press out the needed repair adhesive to a
mat. Mix 2 components to a consistent grey mass with spatula provided. (Finish the mixing within2-4mins)
4.Repair: Fill with the mixed adhesive to overflow the damaged area.Allow it dry for 15mins.
5.Accommodate the outlines: use wet sandpaper to accommodate theoutlines to repaired surface. If necessary, please
repeat step 3 & 4.
6.Lacquering: clean the repair area and apply a thin layer of lacquer by brush. Skin time of lacquer should be at least
12 hours before using thecar, and full cure will takes 3 days.
1 x 6ml Repair glue
1 x Silver gray paint 5ml (vibration-resistant)
1 × Sanding File
2 x Gloves
2 x Cotton Swabs
2 x Paint Brush
2 x Alcohol prep pads
2 x Plastic spatula
1 x Instruction Manual