Remote gauge for wireless tracking of indoor or outdoor temperatures.
915 MHz transmission for powerful, continuous communication and transmission range is up to 330 feet.
Works with La Crosse Technology Weather Stations: WS-7013U-IT, WS-7014CH-IT, WS-7017U-IT, WS-7034U-IT and WS-7215TWC-IT.
Tucked inside the paper product manual is where the you can find the screws.
Also compatible with WS-7394U-IT-CH, WS-9077TWC-IT, WS-9080U-IT, WS-9117U-IT, WS-9160U-IT, WS-9611U-IT, WS-9640U-IT, WS-9711U-IT; Measures approximately 5 by 1 by 1-1/2 inches; takes 2 AA batteries, not included.
Imported from USA.
The La Crosse Technology TX29U-IT 915 MHz Wireless Temperature
Sensor is used in conjunction with La Crosse Technology wireless
temperature stations that use the 915 MHz Instant Transmission
In order to establish proper communication between the display
and outdoor transmitter it is important that they be set up as
1. Bring both units inside and have the units 3-5 feet apart
with nothing in-between them.
2. Remove the batteries from both units.
3. Press one of the buttons on the display at least 20 times to
clear all memory. Verify that the display is blank before
4. Using a good quality alkaline battery place them back into
the remote sensor; making sure they are installed according to
the diagrams in the battery compartment. Next, taking care not to
press any buttons, reinstall the batteries in the display
according to the diagram in the battery compartment.
5. Do not press any buttons for at least 15 minutes after
installing the batteries. (Let them establish a good connection.
An outdoor temperature should be showing on your display. You
can now put your outdoor sensor back outside.