Looking for a gift?
 Browse Holiday Gift Guides »

Arctic Silver 5 AS5-3.5G Thermal Paste

by Arctic Silver


Order now to get it by: Sunday December 25 - Tuesday December 27

Condition: New

Product ID: 238086

Delivery Information |Returns & Exchanges |Payment Methods

Description

  • 99.9% pure micronized silver
  • Non-electrically conductive
  • Will not separate, run, migrate or bleed
  • Thermal conductance: >350 000W/m2 degreesC (0.001 inch layer)
  • Easy to apply and remove
  • Contains 99.9% pure silver: Arctic Silver 5 uses three unique shapes and sizes of pure silver particles to maximize
    particle-to-particle contact area and thermal transfer.
    Not Electrically Conductive: Arctic Silver 5 was formulated to conduct heat, not electricity.
    (While much safer than electrically conductive silver and copper greases, Arctic Silver 5 should be kept away from
    electrical traces, pins, and leads. While it is not electrically conductive, the compound is very slightly capacitive
    and could potentially cause problems if it bridges two close-proximity electrical paths.)
    Absolute Stability: Arctic Silver 5 will not separate, run, migrate, or bleed.
    Performance: 3 to 12 degrees centigrade lower CPU full load core temperatures than standard thermal compounds or thermal
    pads when measured with a calibrated thermal diode imbedded in the CPU core.
    Coverage Area: The 3.5 gram tube contains enough compound to cover at least 15 to 25 small CPU cores, or 6 to 10 large
    CPU cores, or 2 to 5 heat plates.
    Important Reminder: Due to the unique shape and sizes of the particles in Arctic Silver 5's conductive matrix, it will
    take a up to 200 hours and several thermal cycles to achieve maximum particle to particle thermal conduction and for the
    heatsink to CPU interface to reach maximum conductivity. (This period will be longer in a system without a fan on the
    heatsink or with a low speed fan on the heatsink.) On systems measuring actual internal core temperatures via the CPU's
    internal diode, the measured temperature will often drop 2C to 5C over this "break-in" period. This break-in will occur
    during the normal use of the computer as long as the computer is turned off from time to time and the interface is
    allowed to cool to room temperature. Once the break-in is complete, the computer can be left on if desired.

    more...

    Bestsellers in Computer Components