• HYGGER Programmable LED Light 957 | Hygger 957 ed Aquarium Light features programmable.
• gradual 24-hour light cycle settings (sunrise.
• midday.
• sunset and night).
• auto on and off.
• to create an optimal condition for your fish and aquatic s. Build-in Timer – The lighting system enables a variety of features such as customizing the intensity and colours of the light.
• setting up daytime to nighttime schedules.
• mimics sunrise and sunset.
• colour gradient loop.
• fine-tune lighting schedule.
• memory function.
• and much more. Sunrise & Sunset Functions – enable the LEDs to be easily programmed to slowly turn on or off in 15-minute which prevents light shock to fish. The white daylight mode blends the white.
• red.
• green and blue LEDs together to produce bright light. Moonlight mode provides 6 single-coloured ( red.
• purple.
• blue.
• cyan.
• green.
• yellow) and 10 levels of dimmable options. One programmable preset can save customized colour combinations and lighting. IP68 Water-Resistant Rating – No need to worry about splashes or other accidental drops of water. Premium fully encased 1.2mm thick aluminium shell provides more effective heat transfer and protects the device from humidity and water intrusion. No fan. Low voltage DC adapter.
• safe to use.
• saving electric bill. Size Size Unit 30 to 45 cm .

Important Safety Instructions 1. Read and follow all-important notices on the appliance before using it. Or it may result in loss of fish life or damage to this appliance. 2. To avoid possible electric shock, special care should be taken since water is constantly in the use of aquarium equipment. 3. In each of the following situations, do not attempt to repair the appliance by yourself. Return it to an authorized service facility for service or did the appliance. A: Do not operate the appliance if it has a damaged cord or plug, or malfunctioning power cord. The power cord of this appliance cannot be replaced. If the cord is damaged, the appliance should be dided. Never cut the cord! B: To avoid the possibility of an electrical hazard, aquariums should be placed to one side of a wall-ed outlet to prevent water from dripping onto the outlet or plug. A drip loop should be arranged by the user for the cord connecting the light to a power outlet. 4. This appliance is not intended for use by persons (including children) with significantly impaired physical or mental capabilities unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety. Children should always be supervised to ensure that they do not play with the appliance. 5. To avoid injury, do not touch moving or hot parts. 6. Always unplug or disconnect all appliances in the aquarium from the power supply before placing hands in water, before putting on or taking off parts, and while the equipment is being installed, maintained, or handled. 7. Never yank the cord to pull the plug from the outlet. Grasp the plug and pull firmly to disconnect. Always unplug the light from an outlet when not in use. 8. Do not install or store the appliance where it will be exposed to weather or temperatures below freezing. For indoor household use only. 9. Make sure the appliance is ed correctly and securely on the aquarium before operating. 10. If an extension cord is needed, a cord with a proper rating should be used. A cord rated for fewer amperes or watts than the appliance rating may overheat. Care should be taken to arrange the cord so that it will not be tripped over or pulled. The connection should be carried out by a qualified electrical installer. 11. The outlet should be installed near the equipment and be easily accessible. 12. This light can be ed on any aquarium with a glass thickness of more than 3mm. The ing legs help prevent the light from slipping into the aquarium by accident during maintenance. 13. To avoid possible electrical shock, do not immerse the light in water. If the light falls into the water, or otherwise becomes wet, do not touch it until you have unplugged it.