--- product_id: 56212561 title: "NE5532 Amplifier Kit Stereo Preamplifier Volume Control Board with Treble Midrange and Bass Tone Controls DIY Kit Preamp Module" brand: "walfront" price: "AED 84" currency: AED in_stock: true reviews_count: 12 category: "Walfront" url: https://www.desertcart.ae/products/56212561-ne5532-amplifier-kit-stereo-preamplifier-volume-control-board-with-treble store_origin: AE region: United Arab Emirates --- # Wide frequency band with low noise for crystal-clear sound Full bridge rectifier power supply for clean, stable current Precision treble, midrange & bass tone controls NE5532 Amplifier Kit Stereo Preamplifier Volume Control Board with Treble Midrange and Bass Tone Controls DIY Kit Preamp Module **Brand:** walfront **Price:** AED 84 **Availability:** ✅ In Stock ## Summary > 🎛️ Elevate your audio game with precision DIY preamp power! ## Quick Answers - **What is this?** NE5532 Amplifier Kit Stereo Preamplifier Volume Control Board with Treble Midrange and Bass Tone Controls DIY Kit Preamp Module by walfront - **How much does it cost?** AED 84 with free shipping - **Is it available?** Yes, in stock and ready to ship - **Where can I buy it?** [www.desertcart.ae](https://www.desertcart.ae/products/56212561-ne5532-amplifier-kit-stereo-preamplifier-volume-control-board-with-treble) ## Best For - walfront enthusiasts ## Why This Product - Trusted walfront brand quality - Free international shipping included - Worldwide delivery with tracking - 15-day hassle-free returns ## Key Features - • **Tailor Your Sound:** Adjustable treble, midrange, and bass shelving frequencies let you customize your audio profile like a pro. - • **Clean Power, Zero Noise:** Full bridge rectifier with decoupling capacitors eliminates AC grid interference for pristine audio clarity. - • **Flexible Voltage Options:** Supports bipolar ±20V to ±35V power supplies with mod-friendly design for advanced customization. - • **Robust Drive & Conversion:** NE5532 chip delivers high conversion efficiency and strong drive capability for powerful, distortion-free output. - • **DIY Mastery with Premium Components:** High-quality PCB and components ensure reliability and a rewarding build experience for experienced hobbyists. ## Overview The NE5532 Amplifier Kit is a high-quality stereo preamplifier board featuring a full bridge rectifier power supply for stable, low-noise operation. It offers professional-grade treble, midrange, and bass tone controls with adjustable shelving frequencies, powered by the efficient NE5532 op-amp chip. Designed for experienced DIY enthusiasts, this kit delivers customizable, crystal-clear sound with robust drive capability and flexible voltage support, making it a top choice for audio projects and upgrades. ## Description Buy NE5532 Amplifier Kit Stereo Preamplifier Volume Control Board with Treble Midrange and Bass Tone Controls DIY Kit Preamp Module: Amplifiers - desertcart.com ✓ FREE DELIVERY possible on eligible purchases Review: quality components, very well designed, easy assembly. - Quality components, very nice board, well designed. Easy to assemble for most experienced hobbyists. The circuit is easy to modify the shelving frequencies of the bass, mid, and treble to suite other applications such as musical, vocal, pa applications. This is accomplished by scaling down the bass caps (0.047uF) and scaling up the treble caps (2n2) by an equal amount. The mid may also be moved too in whatever direction desired. The center frequencies are approximately 20khZ, 800hZ, 20hZ as the kit comes. The overall gain is 10 and that too can be changed by the resistors around the first 5532 op-amp. Further mods are with power supply. You can eliminate the bridge rectifier and jumper + to ac terminal and - to other ac terminal if you already have DC power from somewhere else that is at least +20 volts AND -20 volts (not to exceed +35, -35 volts) plus a ground (neutral), it must be bipolar! The circuit will operate on lower voltages but will require you to put jumpers in place of the voltage regulator I.C.'s and lower voltages will reduce signal swing and hot signals may cause overload (clipping). No need to install the 2200uF caps since the 100uF and 0.022 caps are adequate for decoupling the supply and it could cause power-up surge issues somewhere else. Excellent value for the price. Board is very high quality as are the pots and components. Parts alone would well exceed the price of the kit alone. Built, modified and tested my own kit with 100% success! Very satisfied and highly recommend. Please note there are no instructions or documentation of any kind, so this kit is for more experienced builders. Review: Nice Clean Preamp - This was a fun, easy kit, no schematics or guess work. It sounded so good I bought another one for my other system. The only part that required any skull sweat was the enclosure I put it in. I have the first one rack mounted on 1/8 aluminum rack panel. The panel needed to be thinned out the allow the threads on the potentiometers enough room the accept the nuts and washers. The maximum thickness is about .065 inches. The pot shafts fit in 9/32" holes and the spacing in about .932 inches. A hair under an inch. Have fun!!! ## Features - Power supply circuit adopts full bridge rectifier, the four pins of rectifier is respectively in parallel connected with decoupling capacitor, effectively eliminate the high frequency interference of AC power grid - The chip has high conversion rate and strong drive ability, which will greatly help your project - Small clutter interference of power grid, stable and performance - Wide frequency band and small noise, easy to use - Pay attention that it can not use 12V battery or DC directly as power supply ## Technical Specifications | Specification | Value | |---------------|-------| | ASIN | B075RZG9HT | | Best Sellers Rank | #142,688 in Electronics ( See Top 100 in Electronics ) #838 in Audio Component Amplifiers | | Brand | Walfront | | Brand Name | Walfront | | Customer Reviews | 3.9 out of 5 stars 84 Reviews | | Item Dimensions | 43.31 x 21.26 x 8.66 inches | | Item Weight | 0.07 kg | | Item dimensions L x W x H | 43.31 x 21.26 x 8.66 inches | | Manufacturer | Walfront | | Material Type | Printed Circuit Board (Pcb) | | Maximum Supply Voltage | 15 volts_of_alternating_current | | Minimum Supply Voltage | 15 volts_of_alternating_current | | Model | Walfrontt5sq06xcz3 | | Mounting Type | Surface Mount | | Number of Channels | 2 | | Package Type Name | Cardboard Box | | Part Number | Walfrontt5sq06xcz3 | | UPC | 663862207798 | ## Product Details - **Item dimensions L x W x H:** 43.31 x 21.26 x 8.66 inches - **Manufacturer:** Walfront - **Maximum Supply Voltage:** 15 volts_of_alternating_current - **Minimum Supply Voltage:** 15 volts_of_alternating_current - **Mounting Type:** Surface Mount ## Images ![NE5532 Amplifier Kit Stereo Preamplifier Volume Control Board with Treble Midrange and Bass Tone Controls DIY Kit Preamp Module - Image 1](https://m.media-amazon.com/images/I/5118EW+RXuL.jpg) ## Customer Reviews ### ⭐⭐⭐⭐⭐ quality components, very well designed, easy assembly. *by S***N on March 20, 2023* Quality components, very nice board, well designed. Easy to assemble for most experienced hobbyists. The circuit is easy to modify the shelving frequencies of the bass, mid, and treble to suite other applications such as musical, vocal, pa applications. This is accomplished by scaling down the bass caps (0.047uF) and scaling up the treble caps (2n2) by an equal amount. The mid may also be moved too in whatever direction desired. The center frequencies are approximately 20khZ, 800hZ, 20hZ as the kit comes. The overall gain is 10 and that too can be changed by the resistors around the first 5532 op-amp. Further mods are with power supply. You can eliminate the bridge rectifier and jumper + to ac terminal and - to other ac terminal if you already have DC power from somewhere else that is at least +20 volts AND -20 volts (not to exceed +35, -35 volts) plus a ground (neutral), it must be bipolar! The circuit will operate on lower voltages but will require you to put jumpers in place of the voltage regulator I.C.'s and lower voltages will reduce signal swing and hot signals may cause overload (clipping). No need to install the 2200uF caps since the 100uF and 0.022 caps are adequate for decoupling the supply and it could cause power-up surge issues somewhere else. Excellent value for the price. Board is very high quality as are the pots and components. Parts alone would well exceed the price of the kit alone. Built, modified and tested my own kit with 100% success! Very satisfied and highly recommend. Please note there are no instructions or documentation of any kind, so this kit is for more experienced builders. ### ⭐⭐⭐⭐⭐ Nice Clean Preamp *by F***. on April 4, 2020* This was a fun, easy kit, no schematics or guess work. It sounded so good I bought another one for my other system. The only part that required any skull sweat was the enclosure I put it in. I have the first one rack mounted on 1/8 aluminum rack panel. The panel needed to be thinned out the allow the threads on the potentiometers enough room the accept the nuts and washers. The maximum thickness is about .065 inches. The pot shafts fit in 9/32" holes and the spacing in about .932 inches. A hair under an inch. Have fun!!! ### ⭐⭐⭐⭐ I highly recommend this little op-amp tone/voltage preamp! It’s fun to build and it sounds great! *by D***. on August 11, 2019* I build professional quality products using a modular approach. I chose this preamplifier because it was a do it yourself kit, and uses a very popular and very stable operational amplifier (op-amp) that provides good gain, A very good signal to noise ratio, acceptable harmonic distortion, good input impedance and with a 400-600mV input signal this will easily drive ‘any’ amp board you choose. The other niceties are numerous; if you take a good look at the circuit board, the power ground And output signal ground are isolated, (not coupled) which provides for a floating signal ground which is useful in a lot of different circuit designs s. Secondly, the engineer decided to provide for a full wave rectifier instead of a half wave so if you choose to you can use a low-cost 24vac center tap transformer (12-0-12) which, after being rectified by that full wave bridge will give you +/-17vdc as Vin on the 78/7915 linear voltage regulators, (12*1.414=16.968). This particular solution also stays in a safe zone considering that the filter capacitors that reduce AC ripple are rated at 25 V. The other cool thing is is that because there is not a significant difference between Vin and Vout, And this thing doesn’t suck a lot of current, you don’t have to heat sink the voltage regulators. The way I use these types of products is that I start with a 19 inch rack mount 2U or 3U chassis and I’ll stuff a toroidal transformer, a full wave bridge rectifier and filter cap board, an input selector board (+15vdc), a speaker protection circuit board (+12vdc), a blue tooth receiver board (+5vdc), this preamp/tone board (+/-12vac**), a low pass filter/subwoofer summing preamp (+/-18vac), a dual channel VU meter driver board (+12vdc), a dual channel fixed gain current amplifier that drives the L/R speakers w/200w @8ohms (+56vdc) and finally a single channel/mono current amplifier the drives a passive subwoofer w/500w @4ohms (+48vdc). And sometimes the person who commissions the custom built amp wants to play some vinyl, I will add a RIAA phono preamp (+15vdc). ** most operational amplifiers are a “push-pull” design where the signal crosses zero volts and goes negative to positive etc. So they require dual voltages. You can design your preamplifier around a single ended Circuit so that you don’t need a negative supply but the integrated circuit choices are fewer than the push pull or Darlington type operational amplifiers. You may have noticed that I have several different voltage requirements, with a wide range of voltages in both AC and DC. To digress a little bit, I don’t pay attention to the AC voltage requirements. The diode‘s that are in a rectifier circuit, either half or full wave have a forward voltage drop of approximately 1.2 V. So in the case of the preamp that I am talking about, I’ll just feed the board +/-180V DC instead of the AC voltage. In this particular amplifier that I’m building for someone, the toroidal transformer has a center tapped secondary that gives me +/ -30vac And with a full wave bridge, that gives me (30*1.414 RMS to Peak)=43vdc. Or if I isolate my center tap, I can bridge the two secondaries and get 60 V AC and then use a half wave rectifier (2 diodes) and that way I can supply my subwoofer amplifier. To knock down these voltages I use either an LM 317 or fixed voltage “buck” converters. In this case I’ll use an LM317 and a fixed voltage converter. When I bench tested the preamp, my signal to noise ratio (A-weighted) was 92db. With a 1 kHz signal my total harmonic distortion with a non-inductive load was .062%. Quiescent current was less than 100 mA, fully cranked wide open it was about 800 mA or about 10 W. Channel separation was -66 dB. The dynamic headroom was a very impressive 102 dB! All in all this is a very pretty little amplifier. I did kludge it though. I pulled the electrolytic capacitors and dropped in two that were rated for 50 V DC because of my power supply requirements and what I had available but other than that...that’s it I did supply it with DC voltage though and I took the 1.2 volt loss, it doesn’t matter because of the linear voltage regulators that were built into the design. The finished preamp sounds warm, almost like a tube preamp. However, It did remain very crisp. I suspect that the tonal controls probably have a rolloff of 12 dB. (I got tired of using my oscilloscope so I’m just guessing here). All in all, well worth the money and the one hour it took for me to put this thing together. The components are of good quality including poly styrene capacitors, 1% and 5% resistors and shielded audio taper potentiometers. I really like the way the potentiometers feel, it’s little things like that that make a difference. The one caveat that I have is that I hate those stupid connectors that are supplied. Rarely do I ever use them, I always hard solder everything. I highly recommend this little board, it’s well engineered, it has good quality components, the circuitboard is well laid out and has isolated grounds. Go get yourself one of these and have some fun! ## Frequently Bought Together - NE5532 Amplifier Kit Stereo Preamplifier Volume Control Board with Treble Midrange and Bass Tone Controls DIY Kit Preamp Module - 6J1 Valve Preamp, Vacuum Electrom Tube Preamp Valve Preamp Amplifier Board Audio Amp Assortment Musical Fidelity Kit - Enclosure Protection Parts Kit Tube Preamp Box, Vacuum Tube Preamp Box, for 6J1 Valve Preamp Board --- ## Why Shop on Desertcart? - 🛒 **Trusted by 1.3+ Million Shoppers** — Serving international shoppers since 2016 - 🌍 **Shop Globally** — Access 737+ million products across 21 categories - 💰 **No Hidden Fees** — All customs, duties, and taxes included in the price - 🔄 **15-Day Free Returns** — Hassle-free returns (30 days for PRO members) - 🔒 **Secure Payments** — Trusted payment options with buyer protection - ⭐ **TrustPilot Rated 4.5/5** — Based on 8,000+ happy customer reviews **Shop now:** [https://www.desertcart.ae/products/56212561-ne5532-amplifier-kit-stereo-preamplifier-volume-control-board-with-treble](https://www.desertcart.ae/products/56212561-ne5532-amplifier-kit-stereo-preamplifier-volume-control-board-with-treble) --- *Product available on Desertcart United Arab Emirates* *Store origin: AE* *Last updated: 2026-09-30*