4 independent charging stations
Microprocessor-controlled constant current charging
Spark-proof and reverse polarity/short circuit protection
Contains four independent stations capable of simultaneously charging at 12 volts/1.25 amps per charging bank
Perfect for all AGM (absorbed glass mat), sealed maintenance free and flooded batteries
Microprocessor-controlled constant current charging and temperature compensated to ensure optimum charge voltage according to ambient temperature
Extremely lightweight at less than 3 lbs
The Battery Tender 12-volt/1.25-amp 4-Bank Battery Management System is designed to fully charge up to four 12-volt
batteries simultaneously and maintain each at its proper storage voltage without the damaging effects caused by some
trickle chargers. Compatible with all AGM (absorbed glass mat), sealed maintenance free and flooded batteries commonly
found in some automotive/farm equipment, motorcycles, ATV’s, and personal watercraft, this lightweight, microprocessor
controlled unit provides safe, constant, four-step charging current for every vehicle stored in your garage, shop, barn
The Deltran Battery Tender 12-volt/2-amp 4-Bank Battery Management System with alligator clips, ring terminal, output
Simultaneous charging of four separate lead acid battery batteries, including AGM and gel cell.
Graph and detail of the 4-step charge cyle for the Deltran Battery Tender 12-volt/2-amp 4-Bank Battery Management System
The 4-step charge cycle detailed.
Safe, Smart, 4-step Battery Charging
The Battery Tender 12-volt/1.25-amp 4-Bank Battery Management System is much more than a trickle charger.
Utilizing a 4-step charging program (initialization, bulk charge, absorption mode and float mode), it allows users
to simply connect the charger to up to four batteries, either in or out of a vehicle and forget about it until
you are ready to use it, with the confidence that the batteries in all four vehicles are being maintained at optimal
performance levels. This makes it perfect for seasonal and recreational vehicles like motorcycles, jet skis,
ATV's, snowmobiles and more,. It is also safe for your battery because it utilizes advanced microprocessor
technology that automatically switches its output voltage to a storage or float level. This feature eliminates the
need to worry about the damaging effects of overcharging, and the resulting need to check on the condition of a
charging battery. If or when the battery voltage drops too far under load, this same smart technology resumes
output power and the charging cycle begins again. The unit also features spark-proof connectors, short circuit and
reverse polarity protection, an easy to understand charging status LED indicator for each charging bank, durable
yet lightweight construction and almost no current draw from batteries connected to it.
Key Features: * Four independent charging stations.
* 12 volts/1.25 amps per charging bank.
* Extremely lightweight at less than 3 lbs.
* Operates anywhere in the world. 100-240 VAC, 50/60 Hz.
* Microprocessor controlled constant current charging.
* Spark-proof and reverse polarity/short circuit protected.
* Temperature compensated to ensure optimum charge voltage according to ambient temperature.
* Perfect for all AGM (absorbed glass mat), sealed maintenance free and flooded batteries.
* Designed to meet U.S. and International product safety standards (UL/CE).
* 2-year warranty.
Charger Models Output Voltage Output Current Charging Software*/
Battery Type AC Voltage/
Battery Tender Junior 6V Battery Charger 6V 0.750A 3 Step STD & AGM 120 VAC, 60 Hz
Battery Tender Junior 12V Battery Charger 12V 0.750A 4 Step STD & AGM 120 VAC, 60 Hz
Waterproof 800 12V Battery Charger 12V 0.800A 3 Step STD & AGM 100 to 240 VAC, 50/60 Hz
Battery Tender Plus 6V Battery Charger 6V 1.25A 4 Step STD & AGM 120 VAC, 60 Hz
Battery Tender Plus 12V Battery Charger 12V 1.25A 4 Step STD & AGM 120 VAC, 60 Hz
Battery Tender Plus 12V Battery Charger (Gel Cell) 12V 1.25A 4 Step STD & AGM or GEL 120 VAC, 60 Hz
Battery Tender Twin 800 12V Dual Battery Charger 12V 0.800A 3 Step STD & AGM 100 to 240 VAC, 50/60 Hz
Battery Tender 12V 2-Bank Battery Management System 12V 1.25A 3 Step STD & AGM 100 to 240 VAC, 50/60 Hz
Battery Tender 12V 4-Bank Battery Management System 12V 1.25A 4 Step STD & AGM 100 to 240 VAC, 50/60 Hz
Battery Tender 12V 5-Bank Battery Management System 12V 2.0A 4 Step STD & AGM 120 VAC, 60 Hz
Battery Tender 12V 10-Bank Battery Management System 12V 2.0A 4 Step STD & AGM 120 VAC, 60 Hz
*Note: All Deltran battery chargers will charge all types of lead acid batteries: either flooded (standard
STD), sealed maintenance free Absorbed Glass Mat (AGM), or sealed maintenance free gelled electrolyte (GEL)
batteries. However, for optimum battery performance in deep cycle applications (for example, running a trolling
motor), it is best to chose the Deltran charger that has the charging software specifically designed for the
battery type. Fortunately, since the technical staff at Deltran has developed charging software that works equally
well for both STD & AGM batteries, the only choice to be made is between 2 models: either STD & AGM or GEL
Two-Year Limited Warranty
Deltran provides a limited two-year warranty on its Battery Tender 12V 4-Bank Battery Management System to the original
purchaser based on defective material or workmanship. Warranty is void in cases of product misuse, disassembly or
modification. Other details regarding warranty limitations and procedures are contained in the Deltran Battery Tender
Charger's general limited warranty information sheet enclosed with this product.