Wall Control 30-P-3232B Black Metal Pegboard Pack - (2) 32" Tall x 16" Wide Black Pegboards

I was pleasantly surprised by the quality of these metal pegboard panels. They feel sturdy and well-made, not flimsy like some others I’ve seen. Installation was straightforward, and they mounted securely to the wall. The slots are evenly spaced and work well with standard pegboard accessories, making it easy to organize my tools and keep everything within reach. The clean metal finish gives my workspace a neat, professional look. If you’re looking for a durable and attractive way to organize a garage, workshop, or craft room, I would definitely recommend these. They offer excellent value for the price and have made a big difference in keeping my space organized.

I have these all over the walls of my home office - I am a Computer consultant, and tend to have every cable and adapter under the sun in triplicate at least, so these pegboards are amazingly versatile for hanging cables, storing hard drives, and even mounting a USB hubs and surge protectors using black cable ties to charge tablets, phones, and power hard drives stacked on the shelves. A few things to keep in mind when using these: -Standard Pegboard hooks and baskets work just fine in the round holes, you don't necessarily need to purchase the more expensive Wall Control kits - you can save a LOT of $$ if you just want to use hooks or baskets -However, the Wall Control Shelves are extremely sturdy and can hold lots of weight, only if -You use the slat-mounted Wall Control Shelves and hooks and.... -The Pegboards are properly mounted Which brings me to my main gripe with these - unless your studs are perfectly placed, you'll have to mount these to your walls using either drywall or masonry anchors and that's a bad idea - because any advantage in weight they can support will be negated by anchoring them in something other than a stud - they will pull off if you want to hang heavy tools. So my solution was to purchase some boards, cut them to site, spray paint them black, then attach them to the studs then screw the pegboard into those. I also put some black plastic sheeting behind the boards so the white walls woudn't show through the slats in the Pegboard and it looks perfect. One Pegboard is holding about 80 pounds of stuff with ease. It took me a few weeks to mount all of these - I was careful to center and level them so they didn't look bad. It's a great way to organize your things yet keep them in sight. Out of sight, out of mind they say.

I purchased two Wall Control peg board kits to finish up a work bench I just built in my garage. The panels were very easy to install and attach the peg accessories. Being made of galvanized metal I can also use magnetic mounts to. Also the metal construction feels very durable for years of use without the slots or peg holes wearing out.

I recently purchased the Metal Pegboard to organize my tools and streamline my workspace. The quality of the pegboard is excellent – it's sturdy, durable, and provides a secure place to hang a variety of tools. The sleek metal design also adds a modern touch to my garage. However, I encountered a significant issue during installation. The pegboard is not 16 inches in width, which made it challenging to fit properly in my space. Most studs in walls are spaced 16 inches apart, so having a pegboard of this width would have made the installation process much simpler and more straightforward. Despite its impressive build and functionality, the current size limitation hampers its convenience. I really wish they offered a 16-inch version to align with standard stud spacing. This small change would make it much easier to install at home and would greatly enhance its usability. Overall, the Metal Pegboard is a high-quality product that excels in organization and durability. If a 16-inch version were available, it would be the perfect solution for any workspace.

I had been looking for a way to get more square footage of display area out of a typical craft show or street fair 10' x 10' booth. There were lots of options available online for making various displays using wooden pegboard, but from past projects I know that it is heavy and fairly brittle -- the corners break off easily. When I saw this, I thought I'd give it a try and ordered three sets of these panels. I had originally planned to hinge the pieces with piano hinge to stand them up on the tables in a sort of zig zag method, but I realized that for temporary displays I could just use zipties instead in the pre-drilled holes, and then cut the ties at the end of the day when disassembling and packing up. Much easier and cheaper, and allows more versatility in setting up different configurations. The one downside of these is that the sheet metal is thin, and standard pegboard hooks which are made for thicker wooden pegboard don't "lock in" against the metal. For a permanent installation, it would be frustrating as the pegs fall out with the slightest touch. For my temporary purpose, I found a piece of Gorilla tape on the backside of the panels over the hook area kept them solidly in place so my merchandise didn't get knocked to the ground if the pegs came loose. At the end of the day, pull off the tape and remove the hooks for transport and storage until the next show. This looks stylish and professional in my booth, is easy to store, and allows for a variety of display options. Good stuff!

I decided to give this product a try when we moved to our new house after using the traditional pegboard for years. I've now been using if for about 20 months and it's held up very well. I love the many hook and color options to really make it your own. Two things I'd go back an tell my past self if I could: 1. Just bite the bullet and replace all your crappy 1/4" traditional pegboard hooks with the ones from Wall Control from day one-- you're going to eventually want to replace them all anyway. 2. Get the "optional" o-rings! While the slotted hooks are generally a lot better at the hook not coming away with the tool when you grab it than the traditional kind, the ones that attach via just one slot sometimes still do. You can adjust their tension by bending the tabs per the instructions but I'm never a fan of trying to bend painted metal. The o-rings eliminate this problem entirely and make all hooks stay on rock solid. Ironically, at the time of this writing the ones from Wall Control are the one product of theirs NOT on Amazon but if you search for "O-Rings, Nitrile Rubber O-Rings 7/16" ID, 5/8" OD, 3/32" Width" you can get a 100 pack for $6 that will do the trick just fine. Kicking myself I didn't add these 20 months ago! I'd go so far as to say Wall Control should just include these with every hook set you buy, but I guess maybe they didn't want to muddy the waters as these fall outside their warranty as they can wear out over time.

I would line my whole garage with these if I had the spare money. Super sturdy. Holds weed eaters. Pick ax. All of that with ease. Holes are stud spaced. so you really just need to find one stud. Put a level on it. Mark holes and repeat. Easy process. Use what comes.

This is the star of my kitchen now. Our walls are plaster and lath so all we had to do was screw it in. I’d say the color is even better than in the pictures. It’s deeper and more satisfying to look at. The metal is thick. This thing wouldn’t budge if our house blew up. I paired it with a cheaper set of pegs from another brand just to save money, since I wasn’t even sure what kinds of pegs would be the most useful to me. This has been wonderful for staying minimal, as it forces us to really think about what’s essential because can see everything we own like a graph. Also, I never have to dry dishes again! One less step in the daily routines. In addition, our pans were a special gift. I love knowing I’m storing them carefully and securely, yet still having them on display.

Die Qualität ist recht gut aber im Nachhinein hätte ich eher günstigere Produkte von deutschen Firmen nehmen sollen. Es war eine Empfehlung von amerikanischen Kraftsportlern, die damit ihre diversen Griffe und Zubhörteile verräumen. Dafür ist es sehr gut geeignet aber kein Schnäppchen.

Había pensado instalar un pegboard de madera pero me encontré con esta marca en Amazon, llego bien empaquetada junto a los accesorios que le pedí de la misma marca y tambien de otras marcas para pegboard universal, muy sencillo de instalar, son 2 paneles y ya trae tornillos y taquetes, cada quien puede darle un uso diferente, eso es lo que me gusto de estos paneles, volveré a comprar para la cocina o garage.

made of good quality material but slightly damaged in transit

Good quality, well made in the US, rather than cheaper products made in China

I love these and various wall control accessories. I use them in my kitchen to hang my pots and pans asn utensils as I struggle to access lower cabinets due to mobility issues. These have allowed mw to keep somw independence.