AED 96

Description

This kind of PEI sheet is 3M 468MP tape pre-applied, which means you have no need to apply the 3M tape on the sheet anymore, and no slurry, or adhesive.It is especially convenient to use..
ABS and PLA both stick extremely well to the surface, which eliminates the need for support rafts used for better adhesion. The printed 3D parts will adhere to the PEI surface on a heated bed, and it will release or pop off when cooling down..
Compared with other ordinary hot bed stickers, PEI sheet hot bed stickers are more resistant to high temperatures, more durable, and are not easily scratched.The bottom of the model printed on the PEI sheet is smoother and the model is easier to take out..
Easily clear the PEI sheet surface with a quick wide done with isopropyl alcohol, methyl alcohol, or soap for next use.Optionally, light sanding with 600-1000 grit sand paper can be done after lots of printing to give the PEI sheet more life..
Suitable material: ABS, PLA, PVC, NYLON, PCL, TPU, TPE, etc..

Parameter: Size: 220mm x 220mm (8.66" x 8.66") Thickness: 0.3mm Colour: amber Material: PEI Adhesive material: 3M 468MP Installation: Cut the PEI sheet to size by scoring with a hobby （This PEI hot bed sticker measures 220mm x 220mm）. Remove the protective film from the PEI sheet. Apply the PEI with slight pressure and at an angle to prevent and minimize air bubbles.Once applied set the print bed to 60C and apply pressure evenly across the PEI in a sweeping fashion to firmly set the adhesive. Please use a towel to avoid getting burned. Level the bed and set the height of the nozzle before printing and you are ready to go! Instructions for use: Heat the bed to the desired temperatures for printing (60 C for PLA and 100 C for ABS). Depending on how thick your bed sandwich is, your set temperature may not be your surface PEI temperature. When the print is completed, let the bed cool, and the part will be easy to release from the PEI surface. Parts are actually easier to remove if released before the bed becomes completely cold. Leveling the bed is very, very important when using PEI. You want the first layer to be close enough to be squished a little. PETG is an exception and doesn't like squished layers, in which case a Z gap should be used. Maintenance method: Clean in between prints with isopropyl alcohol and a lint free rag. Acetone can be used instead of isopropyl alcohol, but the bed must be cold if acetone is used. Optionally, light sanding with 600-1000 grit sand paper can be done after lots of printing to give the PEI sheet more life. Packing list: 1pcs x PEI Sheet Hot Bed Sticker (220mm x 220mm )

Reviews

HAWKUNG PEI Sheet 8.66" x 8.66"(220x220mm) 0.3mm Thick 3D Printing Build Surface with 3M 468MP Adhesive Build Platform Hot Bed Sticker Compatible with Creality CR-10S CR-10 Ender 3 Anet E12 Anet A8

Fast Delivery to UAE

Easy Returns & Exchanges

Ask About This Product

Similar Products

› 3 D Printing And Scanning › 3 D Printer Parts And Accessories

Disclaimer: The price shown above includes all applicable taxes and fees. The information provided above is for reference purposes only. Products may go out of stock and delivery estimates may change at any time. desertcart does not validate any claims made in the product descriptions above. For additional information, please contact the manufacturer or desertcart customer service. While desertcart makes reasonable efforts to only show products available in your country, some items may be cancelled if they are prohibited for import in United Arab Emirates. For more details, please visit our Support Page.

Frequently Asked Questions About HAWKUNG PEI Sheet 8.66" x 8.66"(220x220mm) 0.3mm Thick 3D Printing Build Surface with 3M 468MP Adhesive Build Platform Hot Bed Sticker Compatible with Creality CR-10S CR-10 Ender 3 Anet E12 Anet A8 in UAE

Where can I buy HAWKUNG PEI Sheet 8.66" x 8.66"(220x220mm) 0.3mm Thick 3D Printing Build Surface with 3M 468MP Adhesive Build Platform Hot Bed Sticker Compatible with Creality CR-10S CR-10 Ender 3 Anet E12 Anet A8 online at the best price in the UAE?

desertcart is the best online shopping platform where you can buy HAWKUNG PEI Sheet 8.66" x 8.66"(220x220mm) 0.3mm Thick 3D Printing Build Surface with 3M 468MP Adhesive Build Platform Hot Bed Sticker Compatible with Creality CR-10S CR-10 Ender 3 Anet E12 Anet A8 from renowned brand(s). desertcart delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.

Is HAWKUNG PEI Sheet 8.66" x 8.66"(220x220mm) 0.3mm Thick 3D Printing Build Surface with 3M 468MP Adhesive Build Platform Hot Bed Sticker Compatible with Creality CR-10S CR-10 Ender 3 Anet E12 Anet A8 available and ready for delivery in UAE?

desertcart ships the HAWKUNG PEI Sheet 8.66" x 8.66"(220x220mm) 0.3mm Thick 3D Printing Build Surface with 3M 468MP Adhesive Build Platform Hot Bed Sticker Compatible with Creality CR-10S CR-10 Ender 3 Anet E12 Anet A8 to Dubai, Abu Dhabi, Sharjah, Al Ain, Ajmanand more cities in UAE. Get unlimited free shipping in 164+ countries with desertcart Plus membership. We can deliver the HAWKUNG PEI Sheet 8.66" x 8.66"(220x220mm) 0.3mm Thick 3D Printing Build Surface with 3M 468MP Adhesive Build Platform Hot Bed Sticker Compatible with Creality CR-10S CR-10 Ender 3 Anet E12 Anet A8 speedily without the hassle of shipping, customs or duties.

Does desertcart have 100% authentic HAWKUNG PEI Sheet 8.66" x 8.66"(220x220mm) 0.3mm Thick 3D Printing Build Surface with 3M 468MP Adhesive Build Platform Hot Bed Sticker Compatible with Creality CR-10S CR-10 Ender 3 Anet E12 Anet A8 online?

desertcart buys HAWKUNG PEI Sheet 8.66" x 8.66"(220x220mm) 0.3mm Thick 3D Printing Build Surface with 3M 468MP Adhesive Build Platform Hot Bed Sticker Compatible with Creality CR-10S CR-10 Ender 3 Anet E12 Anet A8 directly from the authorized agents and verifies the authenticity of all the products. We have a dedicated team who specialize in quality control and efficient delivery. We also provide a free 14 days return policy along with 24/7 customer support experience.

Is it safe to buy HAWKUNG PEI Sheet 8.66" x 8.66"(220x220mm) 0.3mm Thick 3D Printing Build Surface with 3M 468MP Adhesive Build Platform Hot Bed Sticker Compatible with Creality CR-10S CR-10 Ender 3 Anet E12 Anet A8 on desertcart?

Yes, it is absolutely safe to buy HAWKUNG PEI Sheet 8.66" x 8.66"(220x220mm) 0.3mm Thick 3D Printing Build Surface with 3M 468MP Adhesive Build Platform Hot Bed Sticker Compatible with Creality CR-10S CR-10 Ender 3 Anet E12 Anet A8 from desertcart, which is a 100% legitimate site operating in 164 countries. Since 2014, desertcart has been delivering a wide range of products to customers and fulfilling their desires. You will find several positive reviews by desertcart customers on portals like Trustpilot, etc. The website uses an HTTPS system to safeguard all customers and protect financial details and transactions done online. The company uses the latest upgraded technologies and software systems to ensure a fair and safe shopping experience for all customers. Your details are highly secure and guarded by the company using encryption and other latest softwares and technologies.