CURT 13241 Class 3 Trailer Hitch, 2" Receiver for Frontier and Equator | Fits 2005 to 2026 Nissan Frontier and 2009 to 2012 Suzuki Equator, 5,000 lb GTW, 500 lb TW, 8,000 lb WD

Arrived on time. From previous reviews it seems packaging was an issue but this arrived in a sturdy box with foam protection inside. Everything lined up great and install was easy with included hardware. Looks great, and appears durable. I have always used Curt hitches and been happy with their products.

This review is for the Curt receiver 13241 application to my 2012 Nissan Frontier Crew-Cab Long-bed SL.I cut the box the receiver came in to lay flat so I could use it as a mat to lay on.This is my second Curt hitch receiver. The first was for a Mazda Tribute. As expected, this receiver is massive, accurately made, and finished well with a thick coat of black powder coat.This is a heavy item (for me) weighing in at 45 pounds. Still, it was easy to put on by myself, and I am 70+ years old. The bolt holes were accurately drilled, and the Nissan came with weld nuts already in place. The six bolts came with thick conical washers, which are designed to exert pressure on the bolts as they are tightened. All it took was lining up one bolt hole and start a bolt, then do one bolt on the other side. The rest is easy. Probably the hardest part, besides getting the first bolt on, was torquing the bolts to 65 foot-pounds. There was one bolt partially obstructed by the exhaust pipe, that required a knuckle joint on the socket wrench.That's all there was to installation. the only tools you will need are a 3/4" socket and driver (or 19mm), a 6" extension bar for the socket, a knuckle joint, and a torque wrench set to 65 foot-pounds. You could just use a 3/4" (19mm) box wrench.On the Nissan Frontier, the receiver was jut a little inside the rear-most edge of the rear bumper, with maybe less than 1/2" clearance below it. I set a 2" hitch into the receiver with no problem. However, a Texas "tailgate" hitch cover, which extends 3" beyond the hith cove shaft, would not fit because the rear edge of the bumper interfered (the receiver was recessed a little too much under the bumper.)All-in-all, the Curt hitch receiver more than met my expectations, and I would recommend it to my friends.

The initially ordered unit was delivered within the stated timeline; however, the mounting slots on the receiver were slightly out of alignment with the threaded bolt holes in my 2025 Frontier's chassis. I simply executed the return/replacement policy through Amazon, dropped the boxed unit off at the UPS store and Amazon had another unit to me within 4 days of me filing the claim. New unit arrived within stated time and mounting slots lined up for a perfect installation. What more could you ask for. Sure, some folks fuss about the Quality Assurance of the company. but that's a global problem these days. As long as they make it right, which they did, I'm good!

Excellent product and even included the VERY HARD TO FIND bolts and washers!!! Outstanding!!!!

It fit great. I put it on by myself. Been towing with it for about a years. No issues or problems. Nothing negative to say.

First let me say that I love the receiver now that it is on. It is hard to put on, especially on a Pro-4X which is Nissan's version of a lifted truck. 4 of the 6 holes lined up perfectly. I had to use a C clamp to pull the wing over a bit to align with one more hole and then the final hole was just un-reachable. However, I am absolutely willing to accept that the alignment is a frame issue as the truck is 5 years old.There are 2 issues I just cannot get past, however. 1) the box it comes in is not sufficient. The receiver was hanging out the bottom of the box when it arrived. This is just too heavy for a cardboard box. This should have been held with a wooden frame inside. Once inside the box there is no packing material whatsoever. I guess since it is one piece Curt decided it didn't need anything else. 2) You absolutely must use washers. However, the washer's provided are conveniently too small for the bolts provided. You cannot use them and I ended up running to Lowe's and spending another $2.58 for 6 washers. This is just unacceptable and shows a lack of quality assurance on Curt's part.Once on the truck it looks great and it is a real solid receiver. I have no concerns about towing anything with it and do recommend it. The only pre-install tip I can offer is to make sure you thread the bolts into the holes once before trying to install the receiver. The holes were somewhat rusted on my truck and it took a bit to get them in. Doing that while holding a 50 pound hunk of steel 2 feel above you is not going to be a good experience.

Easy to install, same ads dealer at half the cost

Well made. Fit 2026 Frontier perfectly. Comes with all hardware.

Installation was ok, fit wasn't perfect but I did get all the bolts in without having to elongate the last slot. All hardware included.Negatives are the powder coating is terrible and will peel and flake over time. Sharp edges on the sheared plate means the powder coating doesn't coat well, there's almost none on the edges so this is where it will rust first. Must have been robot welded, lots of spatter that was painted right over, will lead to rust in the future. Great quality welding otherwise, no worm holes or other glaring flaws.Satisfied with the hitch for the price and would recommend.

Muy bien producto muy recomendable traer todo para instalar y super fácil

Fit well, fasteners came with it, no drilling required. The only issue I ran into was that the welded nuts in my truck were very rusty, and had to be tapped before install. The truck is a 2009, so to be expected. The tap is oddly sized, plan for this if your Frontier is old and rusty like mine.

Well built. Looks good. Easy to install

Fits well. Easy to install with a jack to support