Bose® UB-20 Wall/Ceiling Bracket (Single) – White

My house is a new construction home and the builder pre-wired the living room for surround sound. As a result where all the speaker wire was ran, there were these blank wall plates to hide them. I knew when I ordered these that they would be smaller than the wall plates because my dad has the exact same setup at his house. So I did what he did, which was to mount the brackets directly to the wall plate. He did these a while back so he didn't remember the details, so what I did to compensate was I went and bought flat head machine screws with nuts. I believe 10-32 screws like the ones found here: #10-32x3/4" Flat Head Screws with Nuts I then removed the wall plates, used the included template and a sharpie to mark the drill holes, and drilled what I believe was a 7/32" hole in the marked spots. I screwed down the brackets with the nut on the inside to hold it in place and screwed the wall plates back to their housing (which was very sturdy). Afterwards I attached the speaker and then connected to the system using a surround sound distribution wall plate found here: Monoprice 2-Gang 5.1 Surround Sound Distribution Wall Plate End result came out great, the mounting is surprisingly sturdy and the product did its job perfectly! http://i.imgur.com/PvXmuin.jpg http://i.imgur.com/VazpaR6.jpg

I purchased these for my Bose AM3 speakers to use in surround sound mode. I wall mounted them so the extension arms were not needed. They can be adjusted by loosening a screw, which when tightened will hold them securely. The brackets use serrations (detents) to lock them in, so they are not infinitely adjustable but still have many possible positions. On one side I have the speaker aimed downward towards the wall behind the sofa to bounce the sound behind the listener. The other side aims downward toward the listener on the other sofa from behind. This was a good solution for our medium sized living room. I ran the cables under the floor and up the wall along a window frame on one side and a door frame on the other, so the wires aren't noticeable. The package included a template for marking holes, plus screws and anchors. Installation was easy. I'm very happy with the brackets, especially for the price.

Great condition got the job done and it looks great on the wall!

There are a few points about these worth noting. They are hands down, the best looking brackets and the easiest to attach the Bose speakers to. The speakers virtually "float" where they are placed. In my case, the room was pre-wired with the leads poking through 3/8" holes in the drywall in the exact future speaker positions. If you are planning to do the same, a word of advice: Have your building contractor fasten a 2x4 or 2x6 cross member between the studs or bulkhead structure in those exact spots where the speakers will be and thread the wires through a hole drilled in those cross members. Here's why - if you do not support with wood behind the mounts you will have to use the 4 butterfly bolts (included) to mount on the drywall. The mount holes are grouped in approx. a 2" square and you must drill a 1/2" hole for each bolt. Get the picture?? Add to the equation the 3/8" hole for the wire and it's obvious that you must make the 4 holes for the mount 2 or 3 inches away from the wire hole or the area will become too weak to hold the weight of everything! So... reinforce the spots, use the wood screws instead and you should be able to park the bracket almost on top of the wire hole or close enough that the plastic cover plate will hide the wires. A much neater job in the end and you don't have to tell anyone that you read this hot tip so you can take the genius credit... Tip #2 These little babies are highly overpriced in retail stores ($35-$40 each) so do wallet a favor and buy them on line here for about $18.50ea. plus free shipping for orders over $50. Tip #3 If you are pre-wiring for 5.1 or 7.1 surround, go to a Bose store and invest $40 in their custom wall plug. It's slick and will save you a huge amount of time when hooking it all up! As for the Bose sound, they do satellite speaker systems better than anyone. I found that I had to do a fair bit of manual individual channel tweaking and EQ until I was happy with the overall sound.

I love these speaker mounts for my Bose speakers. I purchased three of them and used them for my rear speakers and my center speaker. It was very easy to follow the instructions and the speakers are held in the wall very securely! Sure, there may be competitor or off-brand speaker mounts for cheaper, but this is a very high quality mount. When you pay as much as you do for a Bose speaker, you want to make sure that it is mounted effectively through a first-party product. The price isn't too high to look at other options, therefore, I recommend you stick with Bose on this one. This is a great high-quality product for your high-quality speaker system!

I was worried about these fitting my Sony speakers, but I had no problems hanging them. The product is made solidly and even though they may be a little more expensive than others, they look great. Two things to keep in mind. The center speaker may actually take 2 holders (my center speaker has 2 holes for mounting, not one) so for a 5.1 surround sound you may need 6. The second thing is that you probably want to buy black speaker wire for these black mounts. I didn't think about it at the time so the gold speaker wire is a little over the top. The product was wonderful and I would purchase 6 more again.

These are made by Bose for Bose and are the perfect form, fit, and function. I used them on the four Acoustimass 10 Series IV double cube speakers and horizontal center channel. They are gorgeous, strong, built to last, and look great. They are very small and discreet and look like they are an extension of the speakers themselves. Installation was a breeze, numerous hanging and hardware options are included. You will not be disappointed. I couldn't be happier.

I just bought a house that was already wired for surround sound but there was no mounts for the spearkers. Sense my speakers are Bose anyway I just decided to stay with the same brand and I am so glad I did. These were so simple to install. It comes with a paper template to mark the holes, but I just started using the metal bracket itself. Total install time is about 5 min per bracket. The installed mine on the wall but it come with all the parts you need to do a ceiling mount as well. Amazon did a wonderful job. Shipping was super fast as always. Gotta love Prime.

Con questi supporti sono riuscito ad appendere al muro le mie piccole casse della sony. Si sono adattati benissimo. Facili da installare con 4 stop forniti. Si regolano a destra sinistra su e giù. Il cavo può essere fatto passare all'interno della mascherina che va al muro ma una piccola parte esce comunque fuori senza però creare troppo fastidio. Belli e funzionali con la garanzia del marchio Bose. Consigliati.

Produit conforme. Support de bonne qualité, très discret. Prix excessif au vu de l'étude qui a du être réalisé pour développer ce produit..

Buenos soportes, se nota que son de calidad, sencillez de ponerlos y buen ángulo de movimiento, si lo recomiendo ok

Prodotto Bose. Basta questo! Consegna veloce. Le staffe sono costruite con la elevata qualità Bose. Possono essere montate sia da parete che da soffitto. Tutto nel kit in dotazione! Dimensione minimal e design elegante

Sehen super aus. Toll verarbeitet. Simpel und doch sehr effektiv. Wir haben die schwarzen Soundboxen, aber eine weiße Wand. Die Halterung sieht montiert ganz unscheinbar aus und bekommt für die Funktionalität und das tolle Design volle Punktzahl. Unbedingte Kaufempfehlung!