Miuzei Case for Raspberry Pi 4 Model B 4gb with Fan Cooling 4Pcs HeatSinks

Beautiful. I actually ordered this for a Pine64's Rock 64 1gb that I bought a few years ago. I had bought one of the other zebra clear cases, and another case that was transparent and had a lid opened that also held the fan. The latter one fell apart over time and was never sturdy, the former has held up fine, but was difficult to put together since I had to remove all of the individual paper protectors for each transparent layer before putting building it. This one comes pre assembled, so you simply remove the screws, which are easy too because these are the kind that the nuts go into the screw openings, so that it holds onto the opening so you're not trying to hold all the layers together and a nut while trying to screw it together. Such a minor difference, but makes the whole process much easier. Theres only 2 papers to unpeal from the blue transparent pieces, which is easy to do, and had it not been for having to flip around a couple of the parts and remove some of the thinner plastic bits, I would've been finished right away if I was using it for a rpi 5. The difference between the Rpi5 and the Rock 64 simply required flipping 2 of the black layers, and removing some of the inner materila on those same layers, but it was very easy to do, put back together, and it works and looks fantastic. The fan in the stock photo is the fan that ships, the one in the picture of the individual componenets doesnt look like its the same as the put together photo, but it is the same one actually. Its much quieter than the fans that have more blades and probably moves more air too. Overall its slightly bigger than the zebra case, and the fan protrudes a bit, but overall it looks very clean, discreet, and somehow more impressive than the other cases I've used.

This Pi case takes a few minutes to assemble because, unlike most other cases, you build this one around the Pi as you go. The instructions are very easy to follow. When you're finished its a perfect, snug fit. All the ports are easily accessible all the way around, especially the SD slot. There is extra space cut out around the SD card making it very easy to remove. I have another layered case similar to this that I don't like very much because the SD card is very difficult to reach when inserted and I usually need to use something to help remove it. I usually don't swap cards in that case very often. I have the blue case which looks really cool when lit with an LED inside. You can't go wrong with this case!

This Raspberry Pi case is sleek, well-designed, and does a great job keeping my Pi cool—even under load, temps stay nice and low. The fan is impressively quiet, which is a huge plus for anyone using this in a workspace or media setup. I found the materials and build quality solid, definitely worth the price. That said, assembly was a bit fiddly, moreso than the clear version of this product, and getting everything to fit just right took some patience. Overall, a great case with excellent cooling, but be ready for a slightly tricky setup.

This is a good case at a nice price. Putting it together was a little awkward since you have to put it together in layers. It comes as slim layers that you lay on top of each other and four screws hold it all in place. Once together the case feels solid and the fan is far better (and bigger) than the stock Pi case. My new RPi 4 was getting a little too warm with a stock Pi 4 case and the tiny little fan. This was a good upgrade, again with a bigger fan and better heat sinks.

Really cool looking case once you get it together. I ordered and had a heck of a time putting together. Works and looks really good once together tho. Ordered a second one and decided to leave one of the screws in place and kind of swiveled the pieces to the side while assembling. Definitely easier this way, cool product! The fan is a nice touch too!

This is the second Miuzei case I have purchased. This one for the Pi v4 does not disappoint. Instructions could not have been written better and give clear and concise steps to follow. Screws are metal and the nuts have an ingenious hat like design that seat themselves into the case for an amazing low profile and tight fit. The care and engineer this company has put into these cases is very well done. Make sure stack the slices in order pictured and make sure you place slice in step #5 before attaching the heat sinks as they have guided slots for where the heat sinks fit. I also made sure the label side of my fan was pointed downward (plain black side up) toward the heatsink to force airflow at the heatsink rather than draw airflow away from it. If you are on the fence for your Raspberry Pi 4 case I would look no further...this is the one for you.

The acrylic was laser cut into many horizontal layers that you have to carefully hold together while assembling. The case and fan does its job but I wouldn't buy again.

A little cantankerous to assemble, but the final result is awesome for the price

This is the perfect little case for the Raspberry Pi 4. It comes with clear, easy to follow instructions, a screwdriver for the parts of the assembly that need it, and 4 heat sinks for the various chips to help with cooling. My one gripe is that some of the layers of the case are rather fragile. I ended up breaking one of them, but I was still able to fit it together properly. It’s nice that they allow both the 3.3V and 5V power to the fan, so you can choose between quiet and performance cooling. And the rubber feet are a nice touch. I also like that the GPIO pins are still accessible in addition to all the ports and card reader. Overall, this is a great, good looking case for anyone with a Raspberry Pi 4

Unless you expect it to work with a Raspberry Pi 3 It works well on my Raspberry Pi 4

Nothing flashy about this, but it gets the job done, feels nice and solid, and the little cooling fan does help a decent bit, even with a slight overclock on the pi. Addition of heatsinks make the value well worth it. Highly recommended if you need something to keep your raspberry pi a little more protected.

The product is very easy to assemble and comes with illustrated instructions as well as the tools you need to put it together. The fan gets quite “whiny” on full speed (5.0v) but if you run it on low speed (3.3v), it’s not nearly as loud.

I purchased this for use with a Pi 3B, as per the description. Not worth returning due to the crazy time and delivery of replacement. Not happy, please change the description, as this looks like it would be a great case, if you had the correct Pi model.