desertcart
Explore

AED 166

Description

  • All position welding of heat resistant 22-25% chromium and 12-13% nickel stainless steels such as 309/309L to itself, to other austenitic Cr-Ni grades such as 304L, 308L, 310, 316L, 321 or 347 as well as martensitic grades 410, 420, 431, and ferritic stainless grades such as 430, 442, and 446; all of these stainless steel grades can be welded to each other or to mild and carbon steels.
  • ***READ THIS: The images are for reference only. Please check Picture #2 for an approximate quantity of electrodes per pound***.
  • The low carbon content of this electrode (0.04% C) preserves the intergranular corrosion resistant properties of the weld deposit and ensures a higher ferrite content than standard 309-16; most 309L-16 weld deposits are greater than 8 FN..
  • Weld deposits exhibit high resistance to cracking and oxidation at temperatures up to 2000 °F. Excellent for welding dissimilar steels or overlaying unalloyed structural steels found in furnace parts, kiln linings, heat containers, forging and castings in , petro, power generation and ceutical industries..
  • These Electrodes are available in Sizes: 3/32" and 1/8" - Available Packages: 0.5 Lb, 2 Lb and 4.4 Lb - Select your option from the Size Menu - Check Picture #2 for an approximate number of electrodes per pound - 3/32" electrodes are 12" long and 1/8" electrodes are 14" long.
Instructions: Use DC+ (reverse polarity), however, an AC machine with sufficient open circuit voltage may be used. Bevel thick sections to a 60° Vee. Clean the weld zone of all contaminants. Preheating 300 series stainless steel is NOT required. The diameter of the electrode chosen should be equal to the thickness of the base metal. Use the lowest possible welding current or increase your welding speed in order to avoid overheating or distortion of the base metal. Overheating stainless steel can degrade the composition and corrosion resistant properties. The arc length should be kept as short as possible but do not touch the flux-coating of the electrode into the molten weld pool. Hold the electrode at a 15° angle into the direction of travel. Stringer beads should be used in the flat, horizontal, and overhead positions. The weaving technique should be used for vertical welding but not to exceed two to three times the diameter of the electrode. Remove all slag before making additional passes. On the final pass, allow the part to cool down partially before removing the slag, then promote rapid cooling by quenching with a wet rag or compressed air. This will preserve the corrosion resistant properties of the 300 series stainless. Do not allow to slow cool.

Reviews

E309L-16 - Stainless Steel Welding Electrode - 14" x 1/8" (2 LB)

?
Fast Delivery to UAE
?
Easy Returns & Exchanges
?
Ask About This Product

Similar Products

Related Pages

› Tools And Home Improvement › Welding And Soldering › Welding Equipment › Welding Equipment And Accessories › Arc Welding Equipment

Browse pages with similar products: welding electrodes, stick welder, desertcart delivers over 100M+ products to United Arab Emirates from around the world.

Disclaimer: The price shown above includes all applicable taxes and fees. The information provided above is for reference purposes only. Products may go out of stock and delivery estimates may change at any time. desertcart does not validate any claims made in the product descriptions above. For additional information, please contact the manufacturer or desertcart customer service. While desertcart makes reasonable efforts to only show products available in your country, some items may be cancelled if they are prohibited for import in United Arab Emirates. For more details, please visit our Support Page.

Frequently Asked Questions About E309L-16 - Stainless Steel Welding Electrode - 14" x 1/8" (2 LB) in UAE

Where can I buy E309L-16 - Stainless Steel Welding Electrode - 14" x 1/8" (2 LB) online at the best price in the UAE?

desertcart is the best online shopping platform where you can buy E309L-16 - Stainless Steel Welding Electrode - 14" x 1/8" (2 LB) from renowned brand(s). desertcart delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.

Is E309L-16 - Stainless Steel Welding Electrode - 14" x 1/8" (2 LB) available and ready for delivery in UAE?

desertcart ships the E309L-16 - Stainless Steel Welding Electrode - 14" x 1/8" (2 LB) to Dubai, Abu Dhabi, Sharjah, Al Ain, Ajmanand more cities in UAE. Get unlimited free shipping in 164+ countries with desertcart Plus membership. We can deliver the E309L-16 - Stainless Steel Welding Electrode - 14" x 1/8" (2 LB) speedily without the hassle of shipping, customs or duties.

Does desertcart have 100% authentic E309L-16 - Stainless Steel Welding Electrode - 14" x 1/8" (2 LB) online?

desertcart buys E309L-16 - Stainless Steel Welding Electrode - 14" x 1/8" (2 LB) directly from the authorized agents and verifies the authenticity of all the products. We have a dedicated team who specialize in quality control and efficient delivery. We also provide a free 14 days return policy along with 24/7 customer support experience.

Is it safe to buy E309L-16 - Stainless Steel Welding Electrode - 14" x 1/8" (2 LB) on desertcart?

Yes, it is absolutely safe to buy E309L-16 - Stainless Steel Welding Electrode - 14" x 1/8" (2 LB) from desertcart, which is a 100% legitimate site operating in 164 countries. Since 2014, desertcart has been delivering a wide range of products to customers and fulfilling their desires. You will find several positive reviews by desertcart customers on portals like Trustpilot, etc. The website uses an HTTPS system to safeguard all customers and protect financial details and transactions done online. The company uses the latest upgraded technologies and software systems to ensure a fair and safe shopping experience for all customers. Your details are highly secure and guarded by the company using encryption and other latest softwares and technologies.