Premium Hot Tub Cover

I purchased this hot tub cover about a year ago. I held off writing a review so I could give it some time to see how it works and holds up. It's still an evaluation in process, but so far so good. Prior to buying, I thoroughly researched all the major hot tub cover manufacturers, the plusses and minuses of their product. Hot tub covers are expensive and my ultimate goal was to ensure I bought one which would give me the longest life I could. The biggest problem researching H/T covers is getting accurate information. A lot of companies have details which are vague or even misleading on their websites. You read a lot of horror stories too about shoddy construction. And there are a ton of options, "...which ones do I need?". When you order from the Cover Guy on Amazon, you're basically ordering the 'base' cover and then a Cover Guy (C/G) rep will contact you for any adds you might want, which they will bill you for extra above and beyond the amazon order. Only after you submit the documentation to them on size/shape/color/options and sign it will they release the order. I went through Amazon so I would theoretically have some leverage if the service wasn't good (which turned out not to be an issue). I had a ton of very specific questions for the Cover Guy rep before I ordered and finally found a person who could answer them (it wasn't the associate who handles their Amazon account). The adds The Cover Guy has are legitimate, not an up-sell. If you go with the basic top, you're going to get just a basic product that probably won't last as long if you spend a little more on some upgrades. And the upgrades you order can vary depending on if you live in the N. or S. or keep your H/T indoors, so it's not a one thing fits all kind of order. A person needs to be thoughtful when ordering. Some of the additional options help increase lifespan and energy efficiency. For example, I opted for the much stiffer 2 lb foam in a 5"-3" taper to handle heavy snow loads, or the unexpected large dog or kid climbing on the cover. It's much stiffer and more energy efficient and tends not to absorb water as readily as the 1.5 lb foam. There's value in that. Then there's the double-wrap foam option because any holes or tears in the wrap allow chemicals and rain water to get inside and soak the metal center support and corrode it (making it weak). insulated hinge. I wish I would have went with additional side straps due to windy conditions. The Cover Guy distributes two different covers: Prestige made in FL and another one made in Mexico (and maybe other factories). I'm sure they're both good, but you have to request the Prestige if you want it. I went with the Prestige because looking at their product videos their construction looks really good (although there is one youtube video where the cover fits poorly). The insulated hinge on the Prestige for example is thick and fluffy with nicely squared-off corners which sandwiches perfectly between the two halves of the cover and doesn't leave an air gap for heated tub air to escape. Some covers have a really cheaply made center flap that doesn't fit well and leaks air. The zippers are nicely tucked away and shouldn't leak water into the cover (another weakness of some cover designs). The overlapping side flaps fit well. You can tell the Cover Guy rep how long you want the skirt length and they made mine to the exact increment (I think 3 1/2") I wanted and it fit perfectly. Even though they don't specifically advertise a custom skirt length to the 1/2" they can customize it and like I said, mine fit right on the money. Another unique item Prestige offers is a mesh underside. I toggled back/fourth on weather to go mesh or waterproof. Ultimately what kills hot tub covers is moisture gets inside the vinyl cover, the moisture gets trapped in there, waterlogs the foam, rots the center metal support C-channels and makes the cover weigh a couple hundred pounds. When it gets heavy people get rough with them trying to open them and the weight tears the center hinge (which lets in even MORE moisture). It's all downhill from there. If you feel your cover getting heavy, stop and pull out the foam and let them dry ..and re-wrap in plastic. If you can keep the moisture out, the cover could theoretically last almost forever or until the vinyl rots. Most manufacturers encase the foam in some type of plastic to keep them dry and any moisture drains through and down a hole in the inside cover. But the plastic covers eventually tear and let moisture in. Some commercial users say a mesh underside allows the owner to remove the cover and let it dry out in the sun as you use your hot tub. As long as a person was disciplined enough to let it dry out on a regular basis, it would probably be a good way to go. The counter argument is that with mesh, condensation occurs on the plastic directly covering the foam instead of occuring on the underside cover itself. Ultimately I decided to stick with a vinyl underside, maybe I'll try the mesh next time. Finally, if any cover manufacturer advertised they use a stainless steel 18 gauge center C-channels, they'd have my business. Most use flimsy 20 or 22 ga metal that isn't nearly as well corrosion resistent as they claim. I believe Prestige uses an Aluminum C channel, but aluminum corrodes too. We'll see. When it comes to colors, the darker colors are going to tend to warp and become chalky before lighter colors due to sun absorption. So, a light gray cover will look better longer than a black one. I went with chestnut because it matched my tub, but it's something to keep in mind. My cover arrived pretty quickly once the order was released ...less than 2 weeks and was packaged nicely. Normally they tell you to open it up in front of the shipper in case there is some damage, but the shipper dropped it off like a day in advance and I wasn't home at the time. It arrived undamaged and as I held my breath, it fit nice when I installed it. The stitching is nice, really aren't any flaws. There are some wrinkles in the foam cover plastic (below the vinyl) that you can sort of see beneath the vinyl, but not quite enough for me to make a beef about. Any worse and I would have. One design area Prestige could really improve upon would be if they sewed it with the seam on the side (just over the top) and with the top overlapping the side. That way, any water would shed off the top and drip off. As it is, water can pool up at the seam and I'm sure water gets inside between the vinyl and the insulating boards. It would also be nice if they didn't use a 'split' corner skirt, but it is what it is and looks and fits nice. It doesn't hang over the edge and isn't out of square. Here's another a tip to keep in mind ...and another reason I ordered from the Cover Guy: Once a cover ages and becomes unsightly, they have your order on file and you can order another cover ...but only a much-cheaper vinyl 'skin' for significantly less than a whole new cover with insulation. For one thing they can ship it in a box which reduces the cost. then re-install your foam insulating boards into the new skin. You would want to let the foam dry and re-cover them with plastic too. I started with 5 stars but I'll report back as I've had a chance to see how this cover ages. So far it looks and fits nice.

I can’t say enough about this cover! Best quality, perfect fit worth every penny! I was so impressed when I opened the package, I did not expect the high quality!

This product is very well crafted item which was made with the intention to provide the ultimate value for the customer. The cover exceeded expected quality and was delivered ahead of schedule time frame. The high rating was well earned and worth the price.

They have left me speechless with there customer service I have had this cover @2years the inner insulation failed and became water logged when my daughter opened it it swung back out of her control do to the excess water and weight and ripped the side of my hot tub off and broke the arm of the lift that I also purchased from them. I contacted them about the warranty process and sent them all the pictures they requested. We are careful with the cover it cost nearly 1000.00 with the lift and upgrades we chose it has not been abused and is falling apart and literally ripped and torn from failing. Has broken my hot tub and could have seriously hurt someone when it swung back full of water. They offered me a 15 percent discount outside of Amazon I have no confidence in a company that won’t stand behind their product . Their response is basically that it will last longer if I don’t put it on the hot tub and that the chemicals will damage it Here is there response you be the judge But they won’t honor their warranty for me so beware Hi Josh, We regret to inform you that our production team has identified the damage as chemical-related, which falls outside the scope of our warranty coverage. However, we genuinely want to assist you in purchasing a new cover and are happy to extend a 15% discount on your next order. This purchase would have to be made directly through our site as we cannot discount on Amazon - let me know if you want to proceed. Hot Tub Cover Chemical Damage Even with proper chemical maintenance, a gas cloud can form beneath your hot tub cover. This cloud, a mixture of condensation and chemical gases, sits between the water surface and the underside of the cover, leading to rapid deterioration of the cover itself. Ozonators are a primary contributor to this issue, continuously introducing gases into the tub that remain trapped until the cover is lifted. Over time, the moisture and chemicals penetrate the cover, breaking down its materials. The most affected area is the poly wrap that protects the foam inserts from moisture. As the poly deteriorates, it becomes brittle and eventually dissolves, leaving the foam unprotected. Once the foam absorbs moisture, it becomes heavy and loses its insulating properties. At this stage, it’s crucial to replace the cover to maintain your hot tub’s efficiency. How to Avoid Hot Tub Cover Damage If you use your hot tub regularly, removing the cover during your sessions can allow it to breathe and release built-up gas. However, if you leave the cover on for extended periods without removal, you may find yourself needing to replace it more frequently than regular users. Investing in a hot tub cover lifter can significantly enhance your routine; it encourages more frequent cover removal and minimizes wear and tear from dragging or pulling. With a lifter, you not only make using your hot tub easier but also extend the life of your cover. When you shock your hot tub, it’s essential to remove the cover for at least 30 to 60 minutes. This allows the spa to breathe and the chemicals to dissipate before you replace the cover. Doing so helps protect your hot tub cover and ensures optimal water quality.

Looks good. Fits. Arrived on time. Cheesy screws supplied with new fasteners: tiny phillips head is smaller than a #1 bit. 10 minutes per screw to install even when pre-drilled.

Ordering was easy, and the fit is great! (Measure carefully- both directions!, and corners.) These build (all custom) fast… I changed my mind on color the day after I ordered, but the build was already underway! I followed their advice on the skirt length… which was longer than my original. If I do it again, I’d go even longer. If you buy a new cover, I’d consider getting a new cover lift too: the old one looks kind of “out of place” now. Nice touch: it comes with new tie down clips. A nice service that they could offer would be haul away on the old one, but that’s the only thing I could imagine improving.

Followed the instructions on measurements and I took a chance. It works like a charm. Cover are going for over $150 more in my area (Indianapolis). Saved money and transaction and delivery was on point. I should order a little longer on the side but that was on me. Im please and cover looks great. Will follow up with a durability review.

This cover is awesome the company is awesome. This is the 3rd cover I have bought from them in the last 9 years. I usually get the lower to mid grade cover and they last right at 3 years just like clock work. I’m sure most of their covers last longer but I don’t do any maintenance or clean it ever. It sits in the bright sunshine and gets snowed on, rain and hail. It holds the heat and keeps the rain and leaves out. I’ve had my hot tub since 2017 with minimum maintenance and I’m sure this cover has a lot to do with it!