• High Quality Material: Our unique gel filler machine is made of high quality environmentally friendly ABS materials and it is more durable than similar products, it is also small, lightweight and compact, so it can be easily stored anywhere.
• 100 Holes : 10 x 10 holes, total 100 holes, base holder and top size 0, faster and easier than other products; Comes with a tool to make this manual filler easy to follow the step by step instructions in just a few minutes at home.
• Widely Use: This empty filling machine is easy to use and effective to reduce waste, for personal use, professional laboratory application, university, pattern testing.
• Fill Powder: Improve filling efficiency, simulate the automatic mechanical arrangement; Suitable for mode 0#, with a cap length of 10.7 - 11 mm, body length of 18.2 - 18.5 mm; e.g. with food supplements, powders of all kinds, s etc.
• Complete Accessories:The machine size 0 contains alignment plate, 0# filler set contains alignment plate, body plate, middle plate, hat plate, powder pressing plate and power shaker, are therefore very practical and compact to store and transport.

Product description ------------------- Features: 1. filling machine 0 is suitable for mode 0#, whose cap length of 10.7-11mm, body length of 18.2-18.5mm. 2. 100 holes filler is capable to fill 100 pieces s one time, fast and efficient. 3. Imitate automatic mechanical arrangement, you can arrange s cap and body quickly, more convenient to use and improve s filling efficiency. Specification: Item Type: Filler Product Material: Plastic Holes Quantity: 100 Suitable for Type: 0# Plate Size: approx. 16.6 * 16.6cm / 6.5 * 6.5inch Package Weight: Approx. 816g Operational Steps: 1. Load the body, put the body plate in flat. 2. Put the frame of the arrangement plate on the body plate. 3. Put about 100 s in the frame. 4. Pick up the plate body and arranged wheel swinging around. 5. body will fall into the plate hole one by one, then pour the extra body out. 6. Take the wheel arrangement plate, put the body installed on the board aside. 7. Filling power in the body. 8. Scrape the board back and forth on the body, when the body is full on powder. 9. Use powder pressing plate filling s plate, filling s. 10. Scraping plate excess powder. 11. Turned over the the cap plate and middle plate to cover the body plate. 12. Lock the body and the cap. 13. Remove the cap plate. 14. Remove the middle plate, pour out the from the locking middle plate. Package Included: 1 x Alignment Plate 1 x Body Plate 1 x Middle Plate 1 x Cap Plate 1 x Powder Pressing Plate 1 x Power Spreader 1 x Handle Note: The s in the pictures are not Legal Discler ---------------- Size Name:0# Specification: Element type: filler Product Material: Plastic Number of holes: 100 Suitable for type: 0 # / 00 # Plate Size: Approx. 16.6 x 16.6 cm Package weight: approx. 816 g Operation Steps: 1. Insert the body and lay the body plate flat. 2. Place the frame of the arrangement plate on the base plate. 3. Place about 100 s in the frame. 4. Lift the plate body and the folded wheel. 5. The body falls one by one into the plate hole and then pours out the additional body. 6. Take the wheel arrangement plate and put the body installed on the board aside. 7. Fill power into the body. 8. Scratch the board back and forth on the body when the body is full of powder. 9. Use the powder press plate to fill the s. 10. Scrape off excess powder of the plate. 11. The cover plate and the middle plate turned over to cover the housing plate. 12. Lock the body and cap. 13. Remove the cover plate. 14. Remove the middle plate, pour out the from the middle locking plate. Contents: 1 x Alignment Plate 1 x body plate. 1 x Medium Plate 1 x lid plate. 1 x powder press plate. 1 x power distributor. 1 x handle. Notes: 1. Please allow 1~3mm error due to manual measurement. Thanks for your understanding 2. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard 3. Check the specifications and make sure that the size of the product matches your component