500g Grey Foam Clay

I recommend leaving it to dry for 48h-72h hours (meaning 2-3 days) to have a complete dry and have no trouble. Works good to sand it and no cracks when dried. Is very light and easy to use, soft and just like Play-Doh. Very fun to use. Size is small tho not a lot to work but still pretty decent. Mix with water to smooth it and can perfectly stick to aluminum foil. 10/10 recommended if you are a Crafter.

This was my first experience with foam clay. I love how lightweight it was on the finished item. While making a number of trim pieces and embellishments for a single item, the weight (and balance) of the finished item were a concern. No worries though - those elements barely added any weight at all. I bought & opened this package in December. I didn't open again for several months, and finally pitched it after spotting faint mold discolorations yesterday (in the final days of May). That's an incredible opened-pkg "shelf life" compared to homemade cold porcelain. My only "complaint" is that detailing and edges produced (from the individual molds) are the tiniest bit softer than homemade or commercial air-dry clays. And that attribute just lent a gentle "weathered" quality to my molded elements, which were simply perfect on the finished product. Had I not seen the same embellishments made from other air-dry clays, I wouldn't likely have even noticed this subtle difference. And speaking of differences: The final finished clay work is like tough, rubberized foam. Sealing the piece provided additional reinforcement. While it's nothing you'll be cutting diamonds with, the foam clay was a great option to embellish a hand-made, customized gift. Bonus: If the recipient drops the finished item, or even drops something on it that makes contact with this finished, dried foam clay, the chance of breakage or cracking of the embellishments is virtually zero. I'm very happy with this product's performance and won't hesitate to buy it again for similar applications.

Perfect for prosthetic shape for that unique hernia that you can't quite get with off the shelf trusses. Still need the truss just mold whatever shape you need and put it in where the "stuffed sock" that comes with the truss goes. Lightweight and any shape. Very rigid once it dries about two weeks.

Good product, it comes very wet and stringy. I had to let it sit out for a few mins before it was workable. It dried okay and wasn't crumbly. However it wasn't very good at holding it's shape as it dried, it had a tendency to flatten out.

Great product. I saw this on YouTube and it saved me slot of effort and cost while I made a fnaf Bonnie costume. Used for teeth and other parts. You can also use this for many other uses

I really love this clay! I’m no expert in crafting and don’t do this type of thing often, but I thought it would be fun to try as a beginner, and it’s been perfect for making small figures and designs. It took a little time to get the hang of how it works, and I did a few test figures first. The foam does bounce back a bit as you mold it, so you’ll need to adjust from time to time. One thing to note is to be careful how you set your pieces to dry, as they do flatten on the side they’re resting on. I’ve found it works best when they have one designated base to sit on. As it dries, the outer layer becomes rigid, while the inside remains soft, which allows you to add texture and detail like puncture holes. The clay sticks to itself effortlessly, making it easy to add pieces on or place little details without damaging them (like the little flowers on my bear.) I also experimented with adding a tiny bit of acrylic paint to alter the base color, which worked fine, though adding too much will cause the clay to seize up and become difficult to mold. I also found it paints beautifully once dried. When fully hardened, the clay is lightweight and solid, though it does take some time to fully dry inside, even if it feels dry to the touch outside. I know it's fully dried when I can knock on it and it doesn't bounce back at all and sounds hollow inside. Overall, it’s been a really fun clay to work with, and I’m excited to keep experimenting!

It works fine if you don't need to retain detail, but if you do then I wouldn't purchase this foam clay. Pros: Soft, pliable, easy to work with. Dries in the stated time Cons: Does not hold detail. You will lose at least 60% of any detail you sculpt into this clay.

I must have bought and used at least five boxes of this clay foam already for my cosplay project. Great material for adding details to eva foam props and even sealing big enough gaps (whatever is too big for quick seal caulk). I mostly use it in silicone molds. Fill it up, leave overnight and the foam hardens with all the details visible clearly. Does not smell and fun to work with, sands well with Dremel tool.

el producto llego en excelente tiempo y es de mucha utilidad

I got this clay as a first time animal suit maker--I'm making a Wendigo outfit for Halloween--and I needed to make adjustments to the skull I got commissioned, as well as the claws I ordered. Neither have come in yet, so I decided to test the clay out by making the paw pads for the claw hands. Easy to work with, stayed moist and malleable even after being left alone for a little while as I ate, and continued to be workable throughout the entire process. I left it overnight to dry, and to my pleasant surprise, it not only DIDN'T shrink, but puffed up just a bit! Which is excellent for what I need, considering they're going to be buried in faux fur. But the best part? It didn't lose shape or details when it puffed up. Those all remained the same. And I wasn't even aiming for details myself, considering I'll be sanding these down to smooth them out. I'll also be painting them! Anyways, I'm buying more for future projects. This stuff is honestly great, and for the price, it's an absolute steal. If you're thinking about getting this, I recommend you absolutely do.

Excellent product! I used it for EVA Foam costume.

Best product to work on detail

im about to make my 3rd purchase for this product. this is my go to for clay. i make a lot of crafts (like homestuck troll horns!), and these work great! lightweight once dried. <3 to add, convincing you to buy this product, here’s my aradia horns made from this product!