Creality Ender 3 Tray Magnetic Platform 3D Printer Flexible Plate Bed Printing for Ender 3 Pro/Ender 3 V2/Ender 5/CR 20, 235x235mm

Works well item as described

Perfect fit, works like new

Pretty easy to install, mainly have to apply the magnetic sticker onto the existing build plate, and bam, your mat is ready to place. Provides a better way to flex prints off, rather than peeling. When it's brand new, I've had a few of these, they stick extremely well, almost too well, although that may also be my nozzle is too close. Anyway great mat, 5 stars, inexpensive. Easy to use.

Works like new. However, this is not necessarily a quick swap for the original magnetic build surface. One would think that buying the same brand that came on my Ender 3 Pro would allow me to just swap the magnetic surface, but you'd be wrong. The magnetic poles are not consistent which required me to remove the magnetic base sticker and replace it with the one that came in the package. The adhesive is extremely strong which resulted in me needing to hand flatten the aluminum plate after removal.

Maybe there are different batches but I didn't have any of the adhesion issues others had. Prints come off with no effort, much easier than the stock ender 3 plate. One thing to be sure, when you put the adhesive on make sure you put it in the correct orientation. One way it has almost no strength, rotated 90 degrees the magnetic strength is excellent

But now let me tell you the facts. READ THE INSTRUCTIONS The bottom layer only works magnetically in one direction. So if you do the bonehead move I did I just opened the package and slapped the sticky side down and thought I had a magnetic bed -Wrong, I was! I did not read the instructions. The bed piece actually must be aligned to properly function. And to get that sticky stuff off was not easy, didn't want to ruin it. But it has great adhesion at all temps. it is extremely easy to get prints off.

It does what it says, and it's handy to pull off the bed and snap your print off, but it's fragile and pulling it off the bed can ruin your bed level. Mine warped after the first use so the first layer is inconsistent and filament gets buried in the texture. It's easier to remove buried filament from the stock bed than this as well.

This is my favorite Matt, easy on and off from printer bed. So i rarely have to re level my bed from pulling the Matt off. Printer adheres filament very well to it. And prints comes off the Matt like a dream, but not too easy where Id have to use a raft for things that don't normally need one. This is my favorite "upgrade"

Çok kötü baskılar üzerine tam yapışmıyor paranıza çöpe atmayın

... denn es erspart einem so viele Kopfschmerzen beim geliebten Hobby 3D-Druck. Die Haftung ist exzellent und Warping gehört der Vergangenheit an. Ich benutze die Matte auf meinem Anet A8 und das ist wahrscheinlich das wichtigste Upgrade das ich ihm je spendiert habe. Auf Youtube finden sich ausreichend Videos wie man das montiert - 10 Minuten mit dem Cuttermesser und schon ist man fertig. Ich habe von einigen Nutzern gehört die die Matte regelmäßig reinigen "mussten". Das kann ich nicht bestätigen. Ich habe die Matte bislang ein einziges mal gereinigt und zwar mit Wasser und Spüli. Profis machen es mit Iso-Propanol, aber das ist wirklich nicht nötig. Matte kann man ja einfach abnehmen und damit in die Küche gehen. Wichtig: Kein Aceton zu Reinigung verwenden. Das löst die Haftschichten an. Eine Warnung vielleicht noch: Wenn man recht schlecht nivelliert hat und der Druckkopf deutlich zu nah an der Matte ist, dann haftet der Druck wirklich wahnsinnig stark. Ich habe den Fehler gemacht den Druck von der noch heißen Matte mit "sachter" Gewalt zu trennen. Dabei ist die Unterseite der Matte leicht eingerissen und auf der Oberseite habe ich ganz kleine Wellen - ärgerlich, aber sicher nicht die Schuld des Produkts --> kein Stern Abzug.

Should have bought it sooner! Sometimes I broke the printed items while pulling them off the glass plate. No need to break my time costly prints with this flexible sheet! I don't understand the negative reviews, because when you read the instructions it's kinda failsafe. If your plate shifts midprint you didn't line the sheet up right with the adhesive magnetic sticker. Just ordered a second sheet so I can switch plates easily.

Eccellente qualità prezzo, ho risolto tutti i problemi di adesione per le stampe. Il piatto magnetico è immobile una volta posizionato e le stampe a piatto freddo si staccano subito. Stampato ABS, PLA, TPU, PETG

Utilisé pour mes impressions TPU, avant impossible d'enlever de ma plaque de verre sans abimer les impressions. Très bonne adhérence. Le magnétique fonctionne très bien. Et elle ne bouge pas Attention, la plaque ne résiste pas à la chaleur de la buse. Si un problème de home position se produit cela endommage la plaque. Pour les petites impressions je vous recommande d'appliquer un offset sur l'axe Z à la fin de l'impression..