• 6" diameter disc with 6 vacuum holes is compatible with 6-hole random orbit sanders.
• Hook-and-loop abrasive discs can be removed and reattached multiple times with no loss of adhesion, which can increase abrasive disc life.
• Ceramic aluminum oxide abrasive is self-sharpening and more durable than aluminum oxide, and is recommended for heavy material removal of wood, metal, fiberglass, and plastic.
• Zinc stearate coating prevents clogs from forming and extends the life of the abrasive.
• Fiber-reinforced A-weight paper backing combines the flexibility and lightness of A-weight paper with the strength of fiber for a backing that is edge tear-resistant and produces a consistent finish.

The Norton 3X Hook & Sand ceramic aluminum oxide coated 6" abrasive disc has a hook-and-loop ing system for quick disc changes and 6 vacuum holes for use with a 6-hole random orbit sander. Abrasive discs with hook-and-loop attachments don't require ing tools, don't lose adhesion, and stay tightly attached to the sander for quick and easy grit changes during the project. The ceramic aluminum oxide grit is a self-sharpening abrasive that is harder, tougher, and lasts up to three times longer than standard aluminum oxide, and is recommended for aggressive material removal of wood, metal, fiberglass, and plastic. The abrasive has been treated with a water-based zinc stearate coating that prevents clogs from forming and can be used in wet sanding applications. The abrasive and bond do not contain dyes, so colors will not transfer to the workpiece. The disc has an open coat, which resists clogging and promotes flexibility. Open coat abrasives produce a rougher finish when abrading difficult-to-sand materials because the abrasive grains are spaced farther apart than they are on a closed coat product. The fiber-reinforced A-weight paper combines the flexibility and lightness of paper with the strength of fiber to create an edge tear-resistant backing that delivers a consistent finish. Recommended Grit Sizes ---------------------- P220 grit (very fine) For sanding bare, primed, and sealed surfaces for a consistent fine finish P150 grit (fine) For finishing surfaces or cleaning bare surfaces P100 grit (medium) For light material removal and smoothing base surfaces P60 grit (coarse)For moderate material removal and removing surface defects Coated abrasives have individual abrasive grains spaced at a predetermined distance from one another. They are used for a variety of applications — from shaping a part to fine finishing, depending on grit size. Low grit numbers such as 40 are coarse and are used for removing excess material and shaping a part. High grit numbers such as 400 are rated as fine and help create a smooth surface finish. Closed coat abrasives are 100 percent covered with abrasive grains, which extends the abrasive's life, maximizes material removal, and achieves finer finishes on metals and hard materials than an open coat. Closed coats are only recommended for use with non-clogging materials. For open coat abrasives, 50 to 75 percent of the surface is evenly covered, which provides a rougher finish because the abrasive grains are spaced farther apart than on a fully coated product. The gritless spaces promote flexibility and resist clogging when abrading difficult-to-sand materials. The flexibility or rigidity of the abrasive product is also affected by the choice of backing material (either paper, cloth, or fiber). Paper backing, the most flexible backing option, contours to the workpiece and delivers a more consistent finish than fiber or cloth backings. Paper backings are categorized by weight from lightest to heaviest (A- to F-weight respectively). Cloth backings are slightly more rigid, durable, and tear resistant than paper backing, but can still withstand repeated flexing. Cloth backing is categorized by weight from lightest to heaviest (J-, X-, Y-, and H-weight respectively). Fiber backing is the strongest and most rigid backing option, and is recommended for aggressive material removal. Norton Abrasives manufactures sanding, grinding, and polishing abrasives. The company, founded in 1885, meets International Organization for Standardization (ISO) standards 9000 and 14001 for quality and environmental management.