7 inch HDMI LCD 1024x600 Resolution Capacitive Touch Screen IPS Display Module Compatible with Raspberry Pi 4 3 2 1 B B+ A+, PC, Supports Windows 10/8.1/8 / 7

Buy this screen on 2021 until now 2026 he work like a charm. no issue at all

If youre wanting a PC sensor panel, I dont think this can be beat for the price or quality. Time will tell how long it lasts but the screen is perfect for what it is. Connections in rear seem solid. I picked up a USB header to Micro USB and a flat ribbon cable HDMI cable for mine. I havent tested the touch nor will I ever use that. One thing to note that I wasnt aware of though it makes sense. This isnt specific to this sensor panel - its any "monitor" you connect. I run dual screens with this sensor panel being my 3rd. When my screens go to sleep and I wake them up, sometimes an application I had running on my main monitor winds up on this tiny display. Its easy enough to just move it across to where it needs to be but if you have Aida64 set to always be on top you may not know your missing window is hidden behind the sensor panel on the tiny screen trying to figure out where your app is. Just a heads up. A minor thing IMO and again not anything with this panel in general just something that happens with multiple monitors. I dont have this issue with duals - the apps stay on the screen I left them on but for whatever reason they sometimes end up on this display after waking up my monitors. I do have them all on the same card (RTX3080Ti). Worth the money IMO for a sensor panel.

Works well so far. Has HDMI connectivity and micro usb for power. You’ll have to turn on the monitor with the on/off switch on the back. You’ll need m2.5 screws for the stand offs behind the monitor to be able to mount it. My only dislike is that whenever you put the PC to sleep (or shut it down), the monitor stays on unless you disconnect the USB. You can mitigate this issue when shutting down by going to your motherboard bios and disabling USB power when shutting down, but not for a sleep PC. I’ve tried everything I could to get the monitor to completely turn off while the PC is asleep, but I couldn’t figure it out. The only way is to shut down your PC, disconnect the USB, or flip the on/off switch on the back (which you can’t reach once it’s mounted in your case). But other than that, it’s not a deal breaker since I usually just shut down my PC anyway. But if you like to keep your PC on and just keep it asleep, you’ll have to reach for the back of your PC and disconnect the USB every time. Like I said, not a dealbreaker. Overall, great purchase. Makes your PC stand out.

Great little screen! Worked right out of the box. Brightness and clarity are good also. The screen is easy to drive with HDMI input and is being powered by a USB port from the back of my computer. Only think I wish was that the screen backlight would turn off when my computer goes to sleep. The backlight is rather controlled by an on/off switch on the back of the display and doesn't sense if the display is getting a signal or not. Other than that; super happy!

My buddy and I both have used this little screen to upgrade our PC builds. I've always wanted something to help display sensor read out for my PC and this is perfect for that. I have windows 11 and it was plug and play. You'll want to buy stand offs (size: M2.5), screws (size: M2.5) for the install and a thin HDMI cable to help with cable management. I built a bracket with a lift hinge so that I can adjust it and remove it if I needed. Works great, if it ever fails randomly then I'll redo this review but prolly buy another one because they aren't that expensive (comparative to how expensive PC parts are now a day)

Many people here are looking at these panels for DYI sensory panels for there PC. I spent a lot of time looking at many different panels to try to find better value or at least something that made the most sense for my project. Funny thing is I started off with this panel first and thought there has to be a better option. Long story short not really even when I considered spend more money. These types of mods get expensive really fast. $80 for the panel, $60 for Aida64 (You can use the trail but eventually you will pay the money because you want everything unlocked), $30 for alternative skinner cords that are longer the moment you see the cords you will want to change them. I knew this from the start so in my mind this panel costs $120 because I got new cords to go with it longer for cable management. Then maybe $5 for the little standoff box to give mounting options but honestly tap could work just as well it's really light. Next you have things like buying a motherboard header to micro USB i wasted more money when I realized I did not have the slot available on my moba. This panel because it's higher resolution and quality does require a fair amount of power. Also I went with the 7" to be honest if you have the space go bigger there was no changes to my temperatures or any impact. I do enjoy looking at it I was thought many times if sending everything back but ultimately it was 100% worth it in the end. Minor Q&A if you use the mobo header it turns off with the PC. If you use USB you can still turn it off with the PC just change one settings in the bios and continue with life. It's the onboard USB power. ASUS Z690-E --->Advanced -->onboard devices and configuration --->USB power delivery in soft state It's pretty similar for most motherboards. Lastly have fun.

Screen residue and rainbow lines. Switched computers and it still is there with the same image as last computer. It disappears for seconds at a time so it doesn't seem like screen burn in. Its like the screen has memory. Worked great for a few hours yesterday.

Works exactly like a regular monitor! Just plug it in, flip the little switch on the back, and you're good to go! Looks great and the inset connection ports make hiding cables super easy. I mainly got mine to have fun with random wallpapers and memes. Mounting can be challenging with different cases, I ended up using a furniture brace as a bracket to mount to so I could remove and adjust it whenever I want without damaging my case.

Just make sure you buy thin HDMI and Micro usb cables!

Works great, exactly what i wanted

جميلة الصراحة ومافيها اي مشاكل , ركبتها داخل كيس البي سي

LIke some of the other people when i first got the monitor hooked up it set me up with a default driver from nvidia and i had a small screen and a lot of lines on the right hand side and some across the bottom. I tried to manually install a driver in windows 11 and just couldn't find one online. But after a normal restart the screen kicked right on and started to work fine. It list the driver as Generic PnP Monitor. I can choose the recomended 1024*600 or 800*600. Both do work and the touch screen started to work also. I can move my mouse curser with just touching the screen. Been using it for a few days now to display wallpaper engine while out of a game and then load Aida64 on it when in game. Again it won't turn the screen off unless you chose to power off your usb devices from within Bios. Or what i did was buy a usb hub with on/off switches and use the switch to shut that port off if i leave my system running over night. Here is the link to the hub i am using. https://www.amazon.ca/gp/product/B00BWF5U0M/ref=ppx_yo_dt_b_asin_image_o02_s00?ie=UTF8&psc=1 Hope this helps some of you

nice