No wiring needed, powered by solar energy,auto Sensor controls lighting and recharging
LED lights can keep glowing for about 8-20 hours a night after fully charged during the day
Light color: Warm white; Light Modes:flashing,steady On.
Full Charging time in sunshine: 4-8 hours
Waterproof, suitable for indoor and outdoor use, Christmas, party or other celebration activities
Imported from USA
* Warm White
* Overall: Approx 22M 72ft
* Panel to 1st bulb approx 50cm
* 200 LED at 10cm spacing
* Solar Panel 12.5*9CM
* Ground Spike 17.5cm
* Working temperature -20°C--+60°C
* Waterproof: IP44
* Installation and Application:
1.Put the stake onto the tube at back.
2.Find a place for the light with clear and full exposure to the sun. Insert the stake into ground. If the ground is
hard, do not twist or hammer with force. This may result in item damaged.
3.Expose the solar panel to sunshine. Make the solar panel faces right to the noon sun.
4.At the back of the light, there is a push switch: "OFF", blinking,and steady-on lighting. For initial application, we
suggest the solar panel be exposed to the sun fully charge the battery for 1 day or more with manual switch on/flash.
5.Push the switch to ON or FLASH. The light is ready to work automatically at dusk.
6.Please uninstall the safety cover of switch before use.
* Note: If your solar string light is not turn on automatically at dusk,check as follows:
1.Make sure the switch is turned to "ON" or "FLASH";the battery is fully charged
2.When using the light string, keep the solar panel away from light source. The string light may turn off when the
ambient light is too strong (above 15 lux). In this case cover the solar panel or move it away to a dark place.
3.After above, check the solar light at night or in dark. If the light on but not last long, this means insufficient
power storage. Turn the switch button to "ON", and full charge the light under direct sunlight at least 6 hours.
* 1 x Solar Power String Light
* 1 x Ground Spike