Metal Black Band

Fit my galaxy S3 perfectly. Easy to remove links. Durable. Looks and feels good

Great Quality, Makes a Difference in the appearance for your Galaxy Watch. Comes with tools needed to adjust. Very simple instructions, Would Recommend.

Have been snagging a few 22mm bands for my OnePlus Watch 3 just so i can have some options for the occasion. I wanted something more traditional that matched the titanium and steel and saw this and gave it a shot. Install took a bit to figure out without guidance, but once i initially attached the band, found i had it attached in reverse (how the clamp closed) it got really easy from there. I re attached one side after removing the band, sat at my desk with the lage mouse pad it has and with the watch face down, band out you can see arrows on the removable link, pointing in the direction they need to push outward. I removed what i needed in equal amounts from both sides, saved the 2 bits and pins with the tool in the box, took all of 5 minutes at best. Looks and feels great, not too tight or loose. This band is gonna look nice with the right fit on more casual occasions. My daily driver is a mesh style magnet clasp that adjust on the fly, and makes it easy to tighten for monitoring. Good stuff here and not breaking the bank!

The rubber band that came with my S3 Frontier was uncomfortable so I was looking for a metal band as a replacement. I liked the look of this band and the latching mechanism. The finish on the band looked like it would match my S3 Frontier. When I received the band, it was simple to remove the old band and replace it with this one. There's a small "knob" that allows you to operate the spring mechanism on the original watch band and the new spring pins that come with the V-moro band have them, too. This is much easier than prying with a small blade or pin that older watches required. I put the watch on and realized that I had the band on backwards making the latch mechanism awkward to operate. With the "knobs" mentioned above, it was easy to remove and swap it. I put the band on again and found out it was HUGE! I ordered the regular size, I can't imagine how big the XL band would be, but better too big than too small. The kit included a small pin press with instructions for adding and removing links. It is plastic so I wasn't real sure whether it would work but it worked perfectly pushing the connecting pins out and pushing them back in. You have take care to keep the press aligned with the pin being pressed in or out. I recommend going slow and taking your time and think you'll find it easy enough to do. Also, in order to keep the latch centered, it's best to remove or add links in pairs (one on either side of the latch). It's more trouble but worth it. The finish (appears to be black anodized but I can't be sure) was a good match and with stainless steel construction, I expect it to last a long time. If the connection to the watch matched the rounded profile of watch, this would have been a five star review but I realize the band is probably made to be used on multiple models.

Finally! I found a band that not only fit my watch (GALAXY) but fit my wrist too! Nice width, standard installation, the color I wanted.

Don't like rubber watch bands. This is my second one of these bands, the first I wore fire over a year and lost one of the retaing pins when cleaning. Decided to just purchase a whole new band instead of tracking down a replacement pin. Still using the first one, just took a pin from this replacement figured I'd save the new band for later as the first one still looks and functions great. This band easily installed on my S3. Was able to adjust the size to my wrist by removing a link with the supplied tools. If you have never worn a caneterlever clasp band before your in for a treat. They come on and off so easy, yet this one is as secure as a hook style band. I work hard out in the hot humid Florida sun, my work entails more than a fare share of manual labor in sandy muddy environment. I sweat alot. Many of my previous watch bands become pitted and weakend by my sweat, usually have to go with titanium watches and bands, stainless usually fails. However these bands and the S3 watch seem to not have that problem. I use a lot of impact tools with my hands, much of the time over water, this band has yet to come loose, if it did I'd likely loose the watch. The black finish after a year of hard work showes some wear but still not enough fro me to want to switch to the new band. I work hard, I demand my tools do the same, this band has done so.

I know it's an outdated watch but the new ones just doesn't have the looks I like. So I will keep using until I can't. I had a rubber style band that after a while just stretched a little too much to the point where the next hole was too tight and the hole before is too loose. I decided to try a metal band for a few reasons; air flow, looks and adjustability. Band arrived and it was a breeze to remove links and attach to the watch. So far, I love the look and feel, no hair pulling and it fits comfortably on my wrist. Only negative is on me, I should have done this sooner as the watch show signs of use and the band is pristine. Overall, it works and gives the watch a nicer look.

UPDATE: The seller responded almost immediately to me (offering to send me a new band & tool--already a positive departure from many companies' practices), and had the replacement to my home within a couple of days. Immediately I noticed the pin removal tool from the replacement set is dramatically improved (image shows the older tool on the top and the newer version on the bottom): the newer tool has larger, coarser threading and is much more stable. Every pin removed and re-positioned was a secure and simple process. What took a half hour using the older tool, took less than five minutes with the new tool--definitely a pleasant experience. The rubbing of my wrist against my laptop at work has removed some of the black finish on the band, but it's minor and typical of any metal with a dark finish. Overall, I'm very pleased with this purchase. For the price, the quality is great, and I couldn't ask for a better customer experience with the seller. I highly recommend this band and company! I really love the band (it matches the watch well, is comfortable, and looks good--while removing overall girth around the wrist compared to stock band) and would easily give it 4 stars. The problem comes down to the abysmal pin tool that comes with the band. The problem is this tool is all plastic (poor quality at that), meaning the threading is stripped by the torque required to push the pins in/out, and it wobbles on its linear axis making difficult to align with the pin holes. I just barely got the necessary pins in and out to resize the band (the tool basically died halfway through the first pin removal). If the included tool were of better quality (preferably steel) I would really give this product 4 to 4.5 stars. Unfortunately the resizing process 30 minutes of constant frustration.

Very good replacement band for the Samsung Gear S3 smart watch. I wanted to replace the cheap looking rubberized version that came with the watch. This gives it a much more classic look. The band is fairly simple to resize and comes with a handy tool to help do it. One tip is to make sure you notice the arrows on the inside of the band which tell you which way to add/remove the pins. They can be hard to see with them being black on black. Another benefit is that the band is made from stainless steel I believe, so I didn't have any allergic reaction to it like I have had with cheap watch bands in the past. I did have a problem when I first received the band, as one pin holding the latch to the band was broken. However, I contacted the seller, and they had an entire replacement band shipped to me within a few days. I should add that the band does come with extra replacement pins for the links, and to attach to the watch face, but didn't have any for the clasp. I would definitely buy from V_moro again, as they were very prompt and courteous in addressing my problem.

Looks more expensive than it is, adds a bit of extra luxury. Easy to remove links with the included tool too. Very happy

Buena calidad se ajusta perfecto al s3 frontier los pernos son de liberacion rapida como los de la correa original y viene con una herramienta para retirar los eslabones que sobran. La relacion calidad precio es muy buena

gear3classicにつけました。 取り付けは簡単でした。 安物っぽくないと評判がよかったです。

I never imagine this product will have such good quality. The finishing is even through out the product, there is not any single bump any where on this product. This just change the look of your Gear S3. Premium quality strap, must buy.