DRILLNADO XL with Acrylic Guard

• Works on drill press quills with a diameter of 2.95" or less.
• For all 13" and larger drill presses (excluding drill presses with keyless chucks).
• Remove the lower housing to easily change bits.
• Acrylic guard provides clear view of bit.
• Works with up to a 2" forester bit.

There are two sizes of this product. Please look at both DRILLNADO and DRILLNADO XL before purchasing! Finally… dust collection for the drill press!! Dust collection is a huge issue in the shop. Wood dust is a known carcinogen. Exposure to wood dust has been associated with dermatitis, asthma, chronic bronchitis, and cancer. In addition, excess wood debris creates a mess of a shop. Most stationary woodworking shop tools and many handheld power tools have built in dust collection, but not the drill press. Until now! Because DRILLNADO surrounds the drill chuck and drill bit, it collects nearly all of the drilling debris and dust. The fist part of the DRILLNADO housing attaches permanently to the drill press quill. Your shop vacuum or dust collector attaches to this housing. The expandable housing is removable and attaches to the top housing. Because it is expandable (and collapsible) and sustains the desired length on it owns, you can position the vacuum opening directly at the point of the drill bit right where the dust is collected. With the expandable housing removed, you can access the drill quill and change bits as needed.​ DRILLNADO works great with a common shop vacuum, wet / dry vacuum, or a large dust collection system. You can attach a 2.5” or 2.25” dust collection hose. Of course you can attach the DRILLNADO to a 4” dust collector using commonly available adapters / reducers. The top DRILLNADO housing and dust collection hose can stay permanently attached to the drill press when not in use. The removable and expandable housing allows you to place the vacuum opening directly above the tip of your bit and the source of dust. Use DRILLNADO XL with all 13" and larger drill presses (excluding drill presses with keyless chucks). For drill presses with keyless chucks use DRILLNADO. Works on drill press quills with a diameter of 2.95" or less. Included bushings and shims also adapt to 2.6", 2.54", 2.16", 2.05" diameter quills.