P3PBL (TAN)

Amazing, should make a cyan x green tho, purple just doesnt stand out enough but its still a very solid beam

The Cyan laser is the brightest laser I've ever used, even brighter than Green. Cyan and Purple were 2 completely new types I've never used. Purple is a wild card when it comes to visibility, certain textures and colors vibrantly display an almost Bluish color, while others visibility was reduced to 50% with a non existent center mark. Using for an airsoft rifle, I have also purchased and used similar HiLight products in the past, they are usually well built and durable. This is my most expensive HiLight product and I'm quite happy with the results. If the Purple laser was switched out with any other color laser, I think this product would be even better. None the less, I give the product an A+ for originality and functionality.

Use for close range firearms. Pistol, shotgun home defense concealed carry

Love the dual color. The reach for the lasers is Long af. 1/4 mi+. The brightness/visibility is excellent. Amd the lasers actually stays Zero'd.

UPDATE: ( original review below the following but read first ) I was told by Amazon they would refund me regardless of the item being blown apart, the customer service agent I first spoke to purposely tried to give me the run around and told me that regardless of it being destroyed they were going to refund me and that I was going to be emailed a return label and TO IGNORE THE EMAIL FOR THE RETURN LABEL AND THAT IT WOULD TAKE UP TO 3 WEEKS TO BE PROCESSED, ( the 6th of December this is after ordering it in the 26th ) low and behold I check up on this order upon seeing it was not refunded to my Amazon credit card like they said it would be regardless of the situation, and IT SAYS ITS WAITING FOR RETURN After frustratingly BEING HUNG UP ON FOR NO REASON ( I was calm explained everything didn’t have an attitude or a tone and was hung up anyway by 2 customer service agent ) I finally get an agent who escalated the problem after THREE F****** PHONE CALLS….. and I have nothing against foreign call centers but for them to use the language barrier as an excuse for not doing the correct things or taking the correct actions THAT THEY SPECIFICALLY STATE THEY ARE GOING TO TAKE TO ME ON THE PHONE BUT DO DIFFERENT AFTER HANGING UP… it’s JUST FRAUDULENT.. AFTER being transferred and explaining myself 5 times, the 4th time the lady who transfers me says she will explain everything to the woman on the other end, keep in mind I’m speaking very calmly and politely and being very clear and making sure the other person understands me correctly when they say they do I continue, so the lady who transferred me and explained to the person ends up TELLING HER I RECIEVED A DAMAGED ITEM THAT I COULD RETURN WHICH WAS CLEARLY A LIE…. I SPECIFICIALLY said the item was GOOD AND WORKED PROPERLY BUT DIDNT FIT MY SIZE WEAPON WHICH IT STATES IT DOES AND COMMENTED QUESTIONS HIGHLIGHTED ON THE BOTTOM OF THE ITEM LISTING HAVE ANSWERS STATING THE ITEM FITS SUB COMPACT, SO I USED IT ON A SUBCOMPACT TIGHTENED THE LASER AS TIGHT AS POSSIBLE WITHOUT STRIPPING THE SCREW HEAD AND WITHIN ONE TEN ROUND MAGAZINE ON THE 5th-6th SHOT THE LASER JERKES UP JUST ENOUGH TO BE INFRONT OF THE BARREL AND BOOM BLOWS INTO PIECES !!!! SO the woman on the phone today DEC 17th says that the first customer service agent gave me FALSE information ( she specifically said that the refund would be processed regardless of it blowing apart and I would receive a return label AND TO IGNORE THAT EMAIL WORD FOR WORD) and that it was processed as a “refund upon return” …. She then stated that the supervisor wouldn’t allow a refund regardless of the situation through them but then said they are going to contact the manufacturer to tell them about this but I would have to contact them myself AFTER ALL THIS WORK AND HOURS ON THE PHONE WITH THEM OF WASTED TIME I HAVE TO DO MORE OF THIS and that I would have to request a refund through them since they believe the item was defective It’s VERY clear the design is improper since the ONLY FASTENING screw is in the VERY FRONT of the laser and the entire device going from the barrel end to the trigger guard is just HANGING ( reason it’s able to loosen and jerk upward since it’s so thick vertically the item jerked swinging upward and the bottom of the front of the laser where the flashlight is was covering the barrel and that’s how the laser was able to be blown apart) I was sent to all Indian call center employees who have NO IDEA how this is possible and probobally thought I was f***** lying which is no surprise why they gave me the run around LIED TO ME and HUNG UP SEVERAL TIMES … Absolutely unacceptable on both the behalf of the Amazon customer service and the manufacturer… if I do not change my review or update it further it’s due to the fact the manufacturer refused to refund after stating CLEARLY at the time I ordered it AS WELL AS HIGHLIGHTING Q&A responses on what type of sizes it fit and STATING IT FITS SUB COMPACT MICRO COMPACT pistols… and DOING SO OUT OF OBVIOUS GREED and COMPLETE LACK OF CARE FOR THEIR CUSTOMER AND CONSUMERS SAFETY … Stating it fits a pistol size it doesn’t to sell more units and gain more profits when the safety of their customers is at risk… The Amazon customer service center cares 0 about the safety of people I told the first agent who lied to me to get me to wait untill after the eligibility for return date passed so I couldn’t refute the return again and said it was going to be returned regardless of the label being sent to my email and TO IGNORE THAT EMAIL and just WAIT 3 WEEKS … I TOLD HER that they need to TELL THE SELLER to remove the highlighted Q&A and false information stating it fits the size pistol I have and they didn’t do that, she even apologized to me and everything I had to go through that and that she was glad nobody was hurt and that’s “ all that matter “ Yea because they don’t want to have profits reduced… they could give a flying F*** about our safety They send us to customer service agents half way across the globe that have no idea about guns and how they interact with attachments and refuse to refund us when we tell the gods honest truth about the situations and treat us like liars and fraudulent actors … I used to have respect for Amazon… not anymore To think in the Q&A it had a user who specifically stated it fits the hellcat too… F****ng rediculous ORIGINAL REVIEW AFTER FIRST CUSTOMER SERVICE INTERACTION AND BEING TOLD I WOULD BE REFUNDED BY AMAZON : - Had this fitting quite well on my Springfield hellcat, great fit says it fits it as well did some external research and everyone said yea if fits with maybe a 1/8 inch going past the end of the weapon system… but : IT FLEW OFF IN PIECES AT THE RANGE BECAUSE BETWEEN RAPID SHOTS IT SWUNG UPWARD JUST BARELY ENOUGH SO THE FLASHLIGHT BOTTOM WAS IN THE WAY OF THE THE BARRELS LINE OF FIRE AND BETWEEN TWO RAPID SHOTS WITHOUT ANY OBVIOUS SIGN OF IT MOVING TOOK A PART OF THE ROUND AND COULD HAVE BEEN EXTREMELY DANGEROUS AND A CATASTROPHIC FAILURE IT WILL FIT BUT IT WILL NOT WITHSTAND RANGE OR FIRING TESTING WHICH IS EXTREMELY SAD BECAUSE ITS HANDS DOWN THE BEST LASER LIGHT IVE EVER OWNED Blew it to pieces at the range because it jerked up and could have been a catastrophic failure I was trying to hold it as well as I fired it BESIDES THAT I WPULD HIGHLY RECCOMEND THIS AS A GO TO LASER AND LIGHT FOR ANY REGULAR SIZE OR REGULAR COMPACT PISTOLS This light and laser are BY FAR the best I’ve ever seen and I’ve had viridian I’ve had tri I’ve had off brand names… THIS LIGHT IS AMAZING And the fact this is rechargeable??? I saw some guy say he left his charging all night and the thing didn’t work anymore after he took it off the charger …. Obviously he’s not the smartest if you knew anything about batteries and charging and how that works you would know very well that you can easily kill your rechargeable battery or deteriorate it’s utilitarian abilities and life by over charging it charge last very long for a bright light like this

First impressions Seems okay, light is bright with or without strobe and the dual laser is nice. Both lasers are strong beams that light up a room. One issue currently not able to turn off the light or green laser. I can only toggle the blue laser currently on my G19 gen 3. Its stuck turned on but it is low on battery so maybe this is a feature to let the user know the light is low on power? Currently charging it now to see if it fixes the problem. Update #1 Charging it seems to have fixed the problem. The red indicator light on the unit will glow red when low on power and turn green when fully charged. It still works after going to the range but it didn't stay zeroed after checking the lasers at home. They didn't completely deviate from the way I zeroed it but still moved slight off zero. So far, I would recommend. Update#2 Blue laser went out on the range April 4th 2021. Waiting for a refund, still going to get another one with better luck. Might also wait to get the purple laser version instead. Update #3 Coming soon April 23rd 2021 I was able to get my replacement as well as the purple laser version. So far I have put a 100 rounds through each laser combo and they are still alive. I have checked both lasers for deviation off my zero setting and they seem to have stayed on point after going to the range. Small details to note are the blue laser version has a slight yellow tinge to the flashlight. The Purple series versions flashlight has a slightly more white light but nothing major. Probably because the purple series is a newer the light is less old. The last note being that the purple laser is less bright and or prominent than the blue laser. Highly recommend the blue version over the purple version but the purple one is pretty cool to have.

This worked for about two months and then died. To their credit, HiLight replaced the failed unit with a new one under their year-long warranty.

This was perfect. Use both the red and green together for faster target aquisition. It is a 500 lumen, bright enough to see the treeline clearly at 30 yards +. Lasers were visible at night well outside of the range of my 9mm. Install was about as easy as screwing in a light bulb. The adjustments easy as well. I was having a hard time finding a holster for it and ended up with the Falco universal for light attachments. Perfection as well. I CC daily and this combination cant be beat. Also, the light is easy enough to take off that I can still use my other speciality holsters whenever and takes all of 30 seconds. Putting it back on was a breeze and and the laser was still sighted in enough for a good softball grouping at 20ft. Quick note: The single laser has the buttons on the bottom, creating a "hole" right in front of the trigger guard. This one the the buttons are at the top, so they are flush with the guard. If you are looking for a laser/holster upgrade, do yourself a favor.