Air Hammer Chisel Bits,Firecore 4 In Tile Removal Tool for Pneumatic Hammer

Worked great taking up old stick vinyl flooring tiles using my small air hammer and 6 gallon air tank. And the mosaic bathroom tiles came up easily.

Works great 👍

Good quality, holding up well!

Easy to use on the air hammer. good for removal of sheet floor covering on concrete. easy removal of ceramic floor tile. For replacing broken floor tiles, removes the thin set adhesive.

Perfect for removing tile thinset and wood adhesive. My smaller chisel works better on tough tile installation removals. Maybe it's my air hammer,

Worked great with my existing air chisel to remove ceramic tile from a floor for a bathroom remodel. I only needed it for this project but the cost was reasonable and it seems durable.

Fantastic, threw it on my HF Air hammer to clean up some all set residue on my concrete floor and it was way easier. Still a workout but this tool made it about as easy as it could be

I used this chisel to remove ceramic tile from a small kitchen and half-bath. From my experience selling construction tools I didn't think it would last too long. I was surprised it held up the whole job. I did sharpen it on a grinder a couple of times, but it did hold an edge a long time. For knocking the thin set off the concrete slab, a dull edge seemed to work better, as you are really pulverizing it to dust, not scraping it. I was careful to try to not "dry fire" it. Keep the chisel against the work and let off the trigger if it isn't. Don't "ring" the steel, even the best tools can snap in half if dry fired. Let off the trigger when repositioning. Short, controlled bursts are best.

With a small air hamer and a 2hp compressor I managed to clear the tiles from a Kitchen prior to replastering it. Also good at lifting floor tiles. Shame i had to import it from the USA

I ordered this to use with an air chisel to remove leftover mortar from cement to prep a floor for tile. It’s perfect! Solid and has the perfect angle for lifting the thick mortar so I could get down to the cement floor.

I bought this to use for 12" x 12" ceramic tile removal and I am very happy with the performance. This single "spatula", easily removed all the tile and the mass majority of cement, over an area of 240 sqft. That is a serious plus when I look at what I paid for it. Amazingly, there is still alot of life left in this thing, by the looks of it. I would not hesititate to recommend this to any of my friends, based on my experience with it.

Good 👍

I purchased this to go on my pneumatic air chisel, and it fit and worked great. I had to remove tiles that had been added to my cement front steps, where due to snow and rain, they were cracking and lifting. I thought I would try to remove them and have a cement mason come and re-top them with just cement. I started one morning and in 2 hours the five steps were completely cleaned down to the cement underneath. This chisel was able to get underneath the tiles, and I was able to easily chisel off any ridges left under the removed tiles. Would highly recommend purchasing this bit.