P14 PWM PST A-RGB

The ARCTIC P14 PWM PST A-RGB 140mm fan has been an excellent addition to my build, serving as the rear exhaust in my Corsair 7000D Airflow case. It pairs perfectly with my ARCTIC Liquid Freezer III Pro 360 A-RGB, XFX RX 9070 XT, and Ryzen 9 9950X3D setup, helping to maintain stable case temps under load. What sets this fan apart is its strong static pressure performance and semi-passive operation — it runs at 0 RPM when not needed, keeping the system whisper-quiet at idle. The integrated ARGB lighting is smooth, vivid, and syncs effortlessly with the rest of my setup via the SC790 hub and ASUS Aura Sync. Installation was simple, and the black frame with translucent blades looks sleek without being flashy. Despite some opinions that rear exhaust fans aren’t always necessary in positive pressure setups, this one made a measurable improvement in air evacuation and GPU temps.

I built my pc in the SSUPD Meshlicious and wanted some powerful and quiet fans for the front of the case. Originally I started with the Arctic p14 PWM fans and they performed fantastic but had unbearable bearing noise at multiple ranges. I had seen the newer versions of Arctic fans with the outer ring attached to individual fan blades was performing similarly but had solved the bearing noise issue Arctic older models had become infamous for. I picked up two of these and they perform fantastically. They are rather quiet while moving significant amounts of air. I have tried several fans in this pc to find what I liked including thermaltakes tough fan 140, NZXT aer 140, phanteks 140, Arctic p14 PWM, and finally these. These are the most quiet and also seem to have the most static pressure at reasonable RPM’s. The RGB looks pretty good but not the best. I’d give the RGB 7/10 and again, best value option.

I got these, phanteks, noctua, etc, to compare them all and these won hands down. Rly no contest, and given the price they're unbeatable. Much quieter than competition, and more airflow than many. The argb thing is easy and works like a charm. Not my priority as I have a nonwindowed case and don't care about bling, but it works fine and the daisy chain is a great feature that works flawlessly for both fan speed and argb. I ended up putting the more expensive noctua on ebay and the phanteks in a closet as a spare, and even replacing my thermaltake cooler fans w/ other artics fans. These ARE the fans you're looking for (apologies to Obi Wan Kenobi). ----- Update--- One thing worth noting is there is substantial variation in noise levels from fan to fan. For most folks it won't be an issue, but I need really quiet fans (my room noise level is 22db, typically, and I'm right next to the computer trying to listen to what I'm actually doing, not the case!). Of the half dozen I got, they became audible (inside a low noise case, at 1-2m) anywhere from 31%-66% duty cycle. Next time I'll get a spare or two and cherry pick the quietest before finalizing my build. Still, even the noisiest of these was better than any others I tried.

Very good is all I can say. I got this because the Arctic fans on my AIO cooler were also great, and their standalone fans match the quality. Very quiet, cool, and is made of strong materials. My only problem is that the cord is a little short, so without extensions my fan had to be mounted upside down (not that you can visually tell). The RGB is very nice and mine came with a 10 year warranty.

The other day, the fan on my Zalman CNPS9900MAX-B CPU cooler began making an obnoxious scraping noise and running slower than it should've, pretty sure the bearing was starting to fail. The fan was itself a replacement, a Phanteks ARGB fan I'd modified to fit the odd fan mount on the cooler, so I already knew what I needed to look for: a fan with all the LEDs in the fan hub, so I could chop off the frame without compromising anything. This Arctic fan fit the bill perfectly, so I went ahead and ordered it and when it arrived today, I set to work. I clipped off the struts attaching the center part to the outer frame, after un-routing the cables and tucking them out of the way of course, and drilled two small holes for the tiny screws that would secure it to the cooler. Then I reassembled the cooler with the new fan and wow, does it look sharp. It cools better than the old fan, too, idle temps are as low as 38°C in my 21°C bedroom. If you're still hanging on to one of these Zalman coolers, I highly recommend getting this fan and modding it, it's perfect for the job!

Quiet yet powerful 140mm solution. Bought two of them for my build, RGB is bright and pretty accurate. Using 2 of these reduced my case temperature by quite a bit.

Pretty straightforward install (duh). Looks good and is not too loud. Cables are long enough but not insanely long. Blows good air and does it quietly. A bit pricey but worth it. I wish they made a reverse version for the top of the case.

They do the job well – keeping things cool with that smooth control thingy. But the real deal is the A-RGB lighting. Adds a bit of color without going all disco, you know? It's like having a breeze of fresh air with a touch of style. Putting them in was a breeze too. No rocket science, just plug and play. And you can sync a bunch of them without any hassle – cool if you want that coordinated look. Build feels solid, and they don't make a ruckus. And looks-wise, they're not trying too hard. Simple elegance, I'd say. They're the kind of fans that do their thing without shouting about it. So, if you want fans that keep your rig cool and throw in a bit of subtle style, check out these ARCTIC P14 PWM PST A-RGB ones. They do the job and look good doing it.

What can I say? The fan is very quiet and is one of the best!

Ottima ventola utilizzata out take posteriore, bella e silenziosa. Sostituita solo perché il dissipatore enorme richiede a spazio, quindi ho montato lo stesso identico modello ma da 12cm. Arctic sinonimo di qualità, nient'altro da dire.

Bonjour Ventilateur de très bonne qualité , bruit contenu , prix convenable argb après plusieurs mois fonctionne toujours parfaitement je recommande ce produit

Lo que me ha sorprendido es que a bajas vueltas, se oyen muy poco. He puesto tres de ellos en una H7 flow y a 1000 rpms casi ni se oyen y mueven bastante aire. Claro que todo esto son afirmaciones que no puedo respaldar con datos. Uno de los 3 que pedí hacía un pequeño ruido como un "ts ts ts" de que estuviera rozando algo o no sé, al par de días después ya no lo oía. Misterios.

Very smooth RGB with a high number of LEDs, high maximum speed and low minimum speed and the ability to stop it completely, rubber corners for vibration damping, daisy-chain on both the fan control and the ARGB wires. Very happy with them, these have replaced my mix of Fractal Design Prisma and Aspect.