9 CUBE ICE MAKER ASSEMBLY DA97-07365G OEM Original Part

This was so simple to replace and it works great. Would have cost way more to have someone come out to even look at the old one.

I was able to install this replacement ice maker into my refrigerator within five minutes. One screw, a cover plate for the cable and plug were the only things that I needed to be conscious of. Taking it all apart was easy and the plug separated with little force. The toughest part was getting the clip pushed in the right way to allow the actual motor to come off of the roof of the refrigerator. Installation of the replacement was quick and once I turned it all back on, I was back to making ice within an hour and the tray was full within 12 hours. Very easy DIY project and good replacement part so far.

In searching for a replacement ice maker for my Samsung fridge, I found 2 different ice maker models on the internet that said they fit my fridge. It was difficult to determine which model was correct for my fridge, but I finally figured it out. Here is what I found, in hopes this helps someone else: My fridge: Samsung, model RFG295AAWP/XAA, French door with bottom freezer. Ice maker is in fridge compartment and discharges thru left French door. Problem was faulty heater element. Ice tray would fill with water and freeze, but motor would make clicking sound while trying to push frozen ice out of tray without help of the heater. This ice maker: Samsung model DA97-05422A. This ice maker fits my fridge, and comes completely assembled with ALL PLASTIC HOUSING PARTS INCLUDED AND ATTACHED, including top hanger bracket, ice guide fingers, and ice tray paddle. If you buy this ice maker, all you do is remove one Phillips screw to remove a small panel to access the cable plug, unsnap and pull out the old ice maker (no tools for this), and reverse the steps to install the replacement ice maker. This literally takes 5 minutes and you are done. This is a very simple customer repair. The other ice maker that fits: Samsung model DA97-05554A. This ice maker also fits my fridge. The difference is this part number gets you the guts of the ice maker (motor and motor housing, tray, heater, and cable), but does not include the top hanger bracket, ice guide fingers, or ice tray paddle. These 3 plastic parts generally do not break, and can be removed from your old ice maker and attached to this new ice maker before installing this ice maker in your fridge. Two of the plastic parts just unscrew from the old ice maker frame, but the ice guide finger bracket contains tabs that fit into other parts of the old ice maker frame, so the entire ice maker (motor housing etc.) must be disassembled to get this part off. So, if you want to save a few dollars, buy this ice maker part number, but plan to spend an extra 30 minutes getting the plastic parts off your old ice maker and installed on your new ice maker before snapping it into your fridge. I elected to spend the extra money and purchase the DA97-05422A complete unit, and was happy to eliminate the need to swap the plastic parts! The new ice maker makes lots of ice, and is faster than the original. TIP: Have patience when it is first installed! When I plugged in my new ice maker, it did nothing. I pressed the reset button on the unit and held in for 10 - 15 seconds, still nothing. I put the fridge and freezer into "power freeze" mode (since I had the door open) to quickly cool the insides, and tried the reset button several more times, still nothing. So I gave up and went to bed. Next morning (7 hours later) the ice tray was full of ice, and it's been working fine ever since.

What it is: Replacement 7 cube ice maker unit. Why you need it: Original units made by Samsung for Samsung and GE Refrigerators are prone to fail due to a faulty heating element and faulty MAIN PCB board. If your appliance has this issue, call GE at 800-386-1215 opt 5 or Samsung (Samsung Bulletin Number ASC20071012001 and get the kit. The kit (Samsung Part DA81-01421A) includes both the Ice Maker (Samsung Part DA97-05422A) and Main PCB Assembly (Samsung DA41-00413C). Both parts are interchangeable with the respective Samsung and GE appliances. Why I like it: I did not know there was a Service Bulletin, and bought just the ice maker. It works great, and makes ice much faster due to the improved design. The Service Bulletin was in the box, so I called and will be receiving the upgraded Main PCB direct from GE. Users should replace both the ice maker and the main pcb assembly to prevent the issue from happening again. If I knew about this ahead of time, I would have called them direct, and received the kit for a major discount since this is a Technical Service Bulletin. Good luck, and I hope this helps save customers a headache and some $$.

Fit perfect. Easy to install

Samsung fridge stopped making ice so I checked Google and Youtube and I narrowed it down to two parts, the filter housing containing the solenoid valves or the ice maker assembly. Unfortunately I replaced the housing first...I have an extra one now as that was not the problem. I ordered and installed the ice maker assemble and it works great. Perfect fit for my fridge. Fixed just in time for the refreshing warm weather drinks.

Very easy install. Took no time and makes ice just like original. Arrived earlier than expected and save us a ton of money. No repair man required for this install.

It was very easy to replace the old one with this one. It has been working fine since installation. Quickly delivered and cheaper than buying it directly from Samsung

Works perfect and is exactly like the oem Ice maker, would give 5 stars. Do to the poor packaging mine came with a small crack next to the water fill, lucky that it was where it was located that it didn't affect operation of the unit. Very happy with the product. The one time I could have used the over boxed amazon packaging..lol Would still recommend. Hopefully they correct the issue.