• Osmo top oil 3028 clear satin.
• Suitable for interior work top oils and general Joinery.
• Water repellent.

Product Description ------------------- Osmo top oil - for interior use, especially recommended for kitchen worktops. Resistant to common kitchen spillages and cleaning materials. Easy to clean, dirt-resistant and extremely water repellent. Available in 0.125 and 0.5 litres. 1 litre covers approx. 24 m² with 1 coat. Number of coats: a base coat of osmo wood protector is recommended, followed by two coats of osmo top oil. Directions ---------- Wood surface must be clean, dry and frost-free (moisture content max. 18%). Clean old microporous stains thoroughly. Old paints and lacquers must be completely removed. As a general rule, wear a dust during sanding works Fill small cracks, larger joints or holes in wood (with Osmo Wood Filler). Sand wood surfaces carefully. Begin with coarse sandpaper then progress to finer grades– final sanding work for furniture P150-240 (depending on wood species ). For kitchen work tops using absorbent hardwoods like Oak or Beech, final sanding grade P120. For very absorbent woods like Pine, sand to a maximum of P150. The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces. Apply the first coat thinly along the wood grain with an Osmo Microfibre Roller, Flat Brush or Oil Finish Applicator Fleece. Allow to dry for approx. 8-10 hours. Ventilate well while drying. Apply the second coat with an Osmo Oil Finish Applicator Fleece or a lint-free cloth. Avoid covering during drying and curing. After 2-3 weeks, the surface is fully cured. For renovations, one coat applied to the clean and dry surface with an Oil Finish Applicator Fleece or lint-free cloth is usually sufficient.