MAYFLASH Magic-X Wireless Bluetooth USB Adapter for Xbox Series S/X, Xbox One, Switch, macOS, Windows, Raspberry Pi, Compatible with PS5, PS4, Xbox Bluetooth Controller and More

I wanted to use some old fight sticks with my Xbox Series X and this has worked great. It gets my upvote.The first thing I tried is a Mad Catz Tournament Edition for PlayStation 3. This stick is notorious for not working with most modern systems due to its use of the USB UHCI spec. It's super obscure but I guess it seemed like a reasonable choice fifteen years ago. It's not supported by every USB host controller as countless forum posts will tell you. It works fine with the Mayflash MAGIC-X. (And the Magic-S as well. I haven't tested every Mayflash product but they seem to use a common code base for firmware so it should work everywhere.)I then tried a Razer Atrox for Xbox One. That stick is notorious for using an unusual button mapping for the left and right triggers. The MAGIC-X did not handle this correctly. But, to the company's credit, the support engineers truly went above and beyond in dealing with this issue. They acknowledged the issue, acquired an Atrox locally, reproduced the issue and are working on a firmware update. That's the best I could ask for.The last controller I tried was a GuliKit King Kong 2 Pro over Bluetooth. That worked fine with both an Xbox Series X and a MiSTer FPGA.Latency is fine. It doesn't hurt me when playing Super Mario World or any fighters. I've not done a careful latency study.All in all I'd say this is a great solution for the serious home gamer. Someone looking to use it in a tournament would be well served to give it a shot and report any issues to Mayflash directly.

The Magic-S Pro 2 has been out for a while, and is one of the most versatile and best adapters (with regard to latency) on the market. It works with PS3, PS4, PS5, Nintendo Switch, PC and Android. The controllers supported are Dual Shock 3,4, Dual Sense, Xbox One, Xbox Series, Xbox 360 (wired or wireless with wireless adapter) Nintendo Switch, Nintendo Wii U pro, Wiimote, and select wired usb controllers for pc.But the Magic S Pro never supported Xbox consoles….until now.I’m happy to say this adapter is just as good as the Pro 2, but you will still need to have separate adapters if you wish to use one on your PS4 or PS5, and on Xbox.The Magic X supports the Switch, PC and Android like the Magic S , as well as the OG Xbox (with a usb adapter) but only supports the PlayStation 3….not the PS4 or PS5. It would e been great to have an all in one that can do everything, but I’m happy they finally decided to support the Xbox.Now, getting back to my headline with regards to switch pro controller support. As you may know, Brook has a similar adapter called the Wingman XB (and XB2) that supports the same consoles and pc, and it’s a great adapter with no noticeable latency…….EXCEPT for one. The Switch Pro controller doesn’t work correctly on any of the Brook adapters. The latency is horrible. Like really, REALLY bad. It’s something I haven’t seen mentioned in any of the written Amazon reviews because most people probably don’t use the switch pro controller on other platforms. Well, I have and it’s bad. Even after Brook put out some firmware updates to supposedly fix it. It didn’t do anything and the latency is atrocious. The Mayfkash doesn’t have this problem and they’re is no noticeable latency using the Switch Pro controller with the Magic X.So, it boils down to one controller in the battle between the Brook Wingman XB and magic X, with the magic X taking the crown by a very slight edge.

I have a Qanba Q4 since the Xbox 360 that still works (Sanwa parts are just that good!). I've been using Brook Adapters for a while now so that I can keep using the same fightstick. Recently I got a Series S, so I bought the Wingman XB. Everything was working fine on Series S with any number of fighting games including Street Fighter 6. Unfortunately, Microsoft deemed the Wingman XB as unauthorized and I only have until December 10th before it stops working. I reached out to Brook directly. Their response?"Thanks for your supportThe Wingman XB converter will no longer be supported on Xbox consoleWe are looking into the issue and make a new converter in the future.Stay tune on Brook’s website/ FB for all the latest news, thanks."I don't know what to say to that. Brook completely abandoned loyal customers.I read that the Mayflash Magic-X adapters would still work on Xbox Series, so I ordered it to try out. So far everything seems to be working. I'll provide an update should it stop working in the future.

I bought this to be able to use my leverless controllers on my Xbox Series S, mostly because my gaming PC heats up my room a lot during the Summer months.The Good: I can use most of my leverless controllers on my Series S with relatively little fuss. I did have to update the firmware on one of them, but the other two that I own were plug and play. It took a little while for me to figure it out, but most of that was me making it more complicated than it needed to be. If I can save anyone trouble - don't use the passthrough input if your controller has both, just use the standard output.The Not-So-Good: There is input lag. It's not a lot, and it's 100% workable, but I did find myself noticing it occasionally. I haven't used other dongles (and I don't think there are that many out there right now) so I can't really compare it to something like the Brook converter. Weirdly, the input lag seems to vary by controller. One of mine has almost none, another one it's much more noticeable. Why? Your guess is as good as mine.The Potentially Ugly: I have some concerns about the durability of the dongle. The plastic is thin and flimsy, and the USB on the adapter already had some wiggle out of the box. I'm not sure how long it will last especially sticking out the front of my Xbox, but, I guess at the end of the day, it's not that expensive and it works.

So, I haven’t used it long yet but I had to update it to 1.39 it came to me on software 1.30 and would not let my flydigi Vader 4 Pro connect. It was so confusing but all I did was update it, plug in the dongle that came with the controller, put the controller in dongle mode and hold the o button and x at the same time to put it in wired mode (even though it’s wireless) and it connected immediately without any latency at all. Now I can game with pc controllers or ps5 controllers on my xbox series x. All button are functioning without issue.

Worked for 2 days and then got blocked on Xbox series X while using a 3rd party controller design for PCS

I once had an Xbox Elite 2 controller. Like nearly every other Elite controller, it developed stick drift after about a year. I swore never to waste money on another one until MS put better tech in them, like Hall Effect sensors, to avoid stick drift.Not long ago, GameSir released the Super Nova controller that was everything I wanted the Xbox Elite to be. Swappable faceplate, assignable rear buttons, hall effect triggers and sticks, textured grip, charging dock, etc., and long-story-short, I loved it. The only bummer was that it wasn't compatible with the Xbox Series X....or WAS it?Enter the Mayflash Magic X. I decided to roll the dice on this piece of tech in 2025, and I can happily report that it's well worth the price.I plugged the dongle for the Super Nova into the Mayflash Magic-X, then the Magic-X was plugged onto the Xbox. The LED flashed a few times, turned blue (the Xbox pairing color) and that was it. I was connected. Every button and control mapped perfectly! Rumble supported! And with the 2.4GHz dongle the responsiveness is BETTER than the Elite Series 2.And here's the kicker: The price of the GameSir Super Nova plus the Mayflash Magic-X is LESS than an Elite Series 2. It's an objectively better controller than the Elite and you're paying less!I have no reason to doubt the Magic-X will work with your favorite controller, too, whether it be the Sony DS4, the Switch Pro controller, or any 8BitDo controller. This is the solution.For the record I didn't need to do any updating or trick the console with a first party controller. It literally was plug-n-play. I'm told that competitor products require this sort of thing, but the Mayflash really is an out-of-the-box easy solution.Also, just a side note: I don't use turbo or anything. Nor do I generally play online, so I can't comment on that experience.I'm exceptionally pleased. Five stars!

Works great with my wired F500 elite fight stick. Bought it mainly to use as a passthrough to my console so I wouldn't have to keep a controller plugged into the back of my stick to play. I'm now able to play on all consoles.

You can connect and game controller to Xbox series x

Va fantástico. Enchufar y listo, venía con el firmware actualizado, aunque recomiendo chequear de vez en cuando por si sacan nuevas. Nada de lag.

génial fonctionne super bien pour branché manette ps4 sur Xbox On juste branché avec le câble ensuite allumé la Xbox avec la Man. ps4 branché et reconnue direct ,j'ai retiré le câble de chargement et même le Bluetooth reconnue direct

Works fine with Flydigi Apex 4 on Xbox Series X

Funktioniert ohne Probleme am xbox x...habe mamba controller angeschlossen