Nilight Fog Lights Push Button Switch w/Connector Wire Kit 1.28" x 0.87" | 12V ON Off Replacement Toggle Switches for Toyota Sequoia Highlander Tacoma Tundra 4Runner RAVR Yaris

Doesn't fit 2008 style Highlander. Switch works fine, but it sinks too far into the blank slot in the dash (by the wiper defroster button and dash backlight dimmer switch) so once you turn on the lights you can't turn them off, the button must be hitting the edges of the dash cutout. So if you're buying this for a 2nd gen Highlander, look elsewhere. I taped the back of mine with electrical tape to keep it from locking into the slot for the time being until I find something better that works.EDIT: So today on a whim I decided to see if it fit in a different "blank" spot, this one being the closest to the steering column, and to my surprise it fit and works perfect. In the other blank next to the windshield wiper defroster button it didn't work. Strange. Plan on trying it in different unused switch spots, they're not all the same I recon.

Work well , easy installation

So I wanted to use a switch that fit into the factory covered space locations in my 2008 tundra, to get rid of an after market light switch which hung down from under the steering wheel when I purchased the vehicle.This fit in the hole and is functional, the switch came with the connection and long enough pig-tail to hook to the existing after market lighting wires.I will say, while this does work, and light, it does not 100 per cent fit flush... it is sunk in just a little (all the time) not just when turned on. If your OCD is like mine. this may not be the best solution out there..... it is 1000 percent better than a dangling switch under the steering, but it may not be my permanent solution.DrB

Good

Works very good highly recommended

There are 2 size Toyota blanks, look first before ordering so it fits. The wire kit I got had a 3 wire hook up and the switch is 5 wire. I wired it so the back light is only on when headlight or front running light are on, not with DRL. The switch backlights the lower portion of switch indicates “fogs” and fully illuminating when pushed to turn on fogs. I powered the wire harness and relay fogs off of the front driver headlight Amber running light and grounded at battery fender location. Nice switch and good fit. Backlight blue color a little off but not an issue for me.Wire diagram for 3 wire existing switch to 5 wire switch if you need it.

Very cheaply made, just holding it compared to my cali raised switches you tell the difference in craftsmanship. it does turn the lights on and off but the switch itself does not light up, just pay for the pricier switch

Bought this to replace the button included in my aftermarket kit cause the original button used a green LED and I wanted a blue LED to match the rest of the RAV4.The only thing I don't like about this is the bottom "Fog Light" text is lighted with the interior lights, while the top symbol is what gets lit up when the lights are on.

ホームセンターやカーショップで売っている商品よりも安い、トヨタ車用ですが、私はホンダ車に付けました。