Trend CraftPro Guided Profiler Router Cutter Bit, 1/4 Inch Shank, 12.7mm Cut Diameter & 25mm Cut Length, Tungsten Carbide Tipped, C121X1/4TC

I was originally using a hole saw to cut holes in my boards but every time i'd get horrendous splintering. Decided to get this bit to do a proper job. After getting some jigs laser cut this worked perfectly. It's not a plunge bit mind so keep moving as you route if you don't want to drill a hole.The finish was amazing. I was doing holes and slots and it looked like a perfect machined cut. Really crisp edges and smooth bores. Honestly made doing holes and slots ten times better.Just be careful how you move with it when doing a full depth cut as it can sometimes catch and move more than you might expect but I never experienced it jumping at all, and even when it caught the cut was still clean.I'd recommend the bit if you doing jig work, especially if you're looking for a clean cut.

Not cheap but worth the money. I have had over the years numerous pattern following router bits from the cheap to the expensive and generally speaking I usually regret aiming cheap. Sometimes you do grab a bargain but oftentimes you end up with an out of balance bit that chatters and cuts badly or leaves you with double vision because of the vibration.Fortunately when you buy a Trend bit you know you won't have these issues. They cut cleanly with minimal vibration as they are well balanced and the bearing last well.Overall I really do think its better to spend the extra and buy a good quality Trend router bit than a cheapo no-name brand.

These Trend bits are good quality at an affordable price. You get what you pay for, of course, and I think these strike the right balance for the hobbyist. Produces a nice clean, accurate cut, though I don't use them all that often so cannot comment on durability.

Trend cutters always good

Does what I needed and probably will for a while. Needed it to work so didn’t buy a cheap one. It fits as it should and should stay sharp for a while.

This bit costs more than the no name bits available but it is worth it. One thing to check though is that this is the bit you want - Amazon's description is not that helpful. I double checked the model on Trend's website, where it is described far better.

A quality router bit for general routing and cutting work.You can spend £££’s more but get only a little more accuracy in reality. This is fine for cutting laminate worktops, routing straight edges for joins etc. Very happy with it.

Bought this for trimming decor end panels on a kitchen and its very good. It gives a nice clean cut when used in a battery powered trimming router.

a marca diz tudo e bom mesmo bom recomendo

Excellente fraise. Très bonne qualité. Finesse de coupe habituelle avec Trend. Très satisfait de cet achat. Content de Trend en général. Ils font d'excellents produits.

I have not had the opportunity to use this item yet but it is what I want, delivered quickly and at a very reasonable price. It is a Trend product so I know it will do what I want it to do.

Comme indiqué, la queue n'est pas dans une dimension utilisée par les défonçeuses vendues en france. Il vous faudra la réaléser en 6mm (et c'est de l'inox...).Sinon elle a l'air de très bonne qualité. Bien finie, tranchante et équilibrée.