• cushion handle.
• "drop-in" any Ruger clone 10/22.
• 1/4" longer than the OEM.
• Precision Ground Guide Rod.
• Interchangeable Spring Tension.

This great upgrade kit for your 10-22 will give you a precision bolt handle along with the ultimate 10-22 guide rod and our popular tuning springs. The cocking handle is offered in two colors black or silver. The black weighs .4oz, length 1 3/4 and is made from 7075 aluminum. The silver is made from stainless steel with a weight of .6oz, length 1 3/4. Both 10-22 cocking handles are 1/4 inch longer than the OEM Ruger and have the signature Viton cushion for comfort. The KIDD Precision Ground Guide Rod is an upgraded part for your 10-22 and is made from hardened tool steel and held to 2/10,000" tolerance throughout its entire length. The rod is nitride treated which gives its surface a 70C rockwell (harder than a file) surface hardness. Guaranteed the smoothest and slickest 10-22 guide rod in the industry. The three springs come in varying tensions for standard 22LR ammo, subsonic ammo, or high velocity up to 17 Mach 2 ammo. (Note that increased weight is needed on the bolt to compensate for the 17 Mach 2 ammo). Our cocking assembly is made to work with Ruger 10-22 or any after market products that are also interchangeable with the OEM Ruger model. Packaging Includes: bolt handle guide rod 3 tuning springs Installation instructions: After removing the 10-22 stock from the barreled action, remove the trigger and bolt stop. This will allow the needed clearance for the 10-22 bolt to be removed along with the cocking assembly. The video below offers some of the finer installation points. But essentially after choosing your proper spring tension slip the cocking assembly in from the ejection port, placing the cone end into the containment detent. Then fully compress the cocking assembly and place the bolt on it. Let up on the containment allowing the bolt to go forward. Re-install the Ruger bolt stop or aftermarket KIDD bolt buffer, then the trigger and stock.