Freud 6" Pro Dado Set with Tico Hi-Density Carbide for Flat Bottom Grooves - Includes 2 Blades, 3 Chippers, Spacers, Shim Set & Carrying Case, Negative Hook Angle - SD206

Checking Amazon‘s website to see if they have a larger dado set, such as a 10 inch one, I see that I bought the above 6 inch set back in November 2012, over 14 years ago. I still use it every month or so, and after all these years I have to say, it has been a great dado set and has never failed me. Incredibly, the blades still seem to be sharp, even after multiple box joint sets made and put together over the years. I am sure that a larger diameter one would probably work smoother and I amlooking into purchasingone, but for the time being, I will continue to use this old workhorse.

I’ve been using this dado set for about 6 months now, and I’ve gotta say the quality is amazing. The cuts come out super clean and precise, with very little tear-out, even on tougher materials. You can really tell the carbide is high quality—it stays sharp and performs consistently. One of the best parts is how versatile it is. With all the included chippers and shims, you’ve got a ton of options to dial in the exact width you need, which makes a big difference for accurate joinery. Setup is straightforward, and once it’s dialed in, it runs smooth and balanced without vibration. Overall, top-tier performance and build quality. If you want clean, professional results, this set delivers.

I am a hobbyist, but did get a scholarship in woodworking. A router is probably the most versatile tool in any shop, especially if you have a table and mine is no different getting considerable use. My, my dado's, rabbets, etc. were always done on my router table. While I said it is the most versatile, it also means you need to be on your game in terms of router usage and depending on what you want to do, this sometimes means you enter the dangerous climb cut territory as to decrease tear out. I just finished building bathroom cabinets and now, I am building some barn doors. Since I am dealing with 8/4 knotty alder, and I will be renovating my kitchen cabinets as well so I started investigating again. My deal is that I buy the best because I want them to last. My tools, bits and blades reflect that as well, but I did not want to spend $300, hence why I did not have a dado set. Well, I found this, being Freud, I decided to give it a shot and return it if I did not like what I saw. Well, it is impressive. 6" scared me, but thinking through the years, I never needed a dado or groove deeper than an inch, and these blades give more to me, so... In theory, 6" also gives you a little more power, but I have a nice Jet Cabinet saw, so no worries there. Using the set is a pleasure, cutting like butter, no vibration or noise with a very sharp cut. It gives a perfectly flat cut, so that hits my number one requirement for quality in cut. It comes with many spacers as well, even with the thickness stamped, so very helpful. The case is also important as well as it protects your investment and ensures you don't lose parts. If there is a complaint, I would prefer it if it was keyed so you cannot put carbide against carbide. As long as you pay attention when tightening the arbor you will be fine; it only takes a couple seconds to confirm all is well before you tighten. Like another reviewer, the template is inaccurate. The reality though is that we all tend to use just a couple different patterns, so grab the calipers, figure it out, and never worry about it. solid, vs, ply, vs. mdf, vs. melamine are all different, so just create a template for each. There is really no way around this and if you woodwork to any capacity, you do this with everything. Setting tooling up to be square and accurate is the most important step anyway, and if you skip it, you will constantly fight it and your project will show it. So, it's something you should have accepted long ago and if there are two tips I give to everyone who asks me how I do it, I say patience and tool setup. You don't need to have the best tools, but they do have to be setup perfectly. That was free, LOL.

I bought this 8-inch Freud dado set specifically for my underpowered table saw, and it handles the load beautifully. The 12-tooth design requires much less power to cut through material, meaning my saw doesn’t bog down or stall even when cutting full 3/4" grooves in dense plywood. The 5/8" arbor fits perfectly, and the blades run exceptionally smooth up to their 6000 RPM rating.The cut quality on the outer blades is excellent, leaving clean edges with virtually no tear-out. The only reason I am knocking off one star is that the internal chippers leave very minor ridges on the bottom of the dado groove. It is nothing a quick pass with a hand chisel or sandpaper can't fix, but it keeps the set from being absolutely perfect. Overall, this is an excellent, high-quality solution for anyone working with a smaller or standard jobsite saw.

Super clean cutting dado stack. Pricey but well worth it.

A great dado set. Easy instructions. Carbide tips are very sharp. Smooth cuts in old dry plywood where other blades tend to splinter. Shim washers allow precise and quick thickness adjustment as other reviews state. Storage case holder is nice bonus. Would purchase again

If you are planning on making plywood carcasses for cabinetry, do yourself a favor and buy this today - like right now. Do not be like me and buy your first dado stack after making ten thousand cabinet carcasses. This 6" stack is PERFECT for Dewalt's DWE7491 - that's what I used this on and was beyond impressed. The saw had ZERO issues cutting a 5/16" deep dado - I believe that's what I did - in one pass. So here's the kicker: Look at my photo, this is cheap $45 a sheet imported plywood with a terrible thin veneer - not $95 a sheet ply from the big box aisles. This cut almost smooth as a baby's bum - granted it's brand new and that image shows the 3rd cut I made with this blade. So let's talk arbor: Mine was nearly tapped out with two blades, three chippers, and just one shim. This set up got me just a tad undersized for 3/4" ply, so I maybe needed one more spacer or a combination of the much thinner shims. So I think the Dewalt DWE7491 arbor has just enough real estate to hold what you need to cut 3/4" ply but NO MORE. And that's okay. Two dado passes to achieve that odd wider than 3/4" dado is much faster than 6 single blade passes - I might know that. So overall, if you own a smaller contractor sized saw, I HIGHLY recommend this blade. I also bought the throat plate made by FBULWSEC, sold on Amazon, and I am really happy with that as well.

I'm a novice home woodworker and needed a dado set. This can be a big investment so I made sure to read a lot of reviews before making my decision. Even though this dado set is more expensive than a lot of other sets I decided to go with this Freud 8inch Stacked set due to reputation, quality and reviews. I almost went with another brand that was about half as much in price but I kept coming across people saying that they wished they had spent the extra cash to get a better quality dado set due to issues they were having. With that said I got this one and after using it for 2 projects I'm very happy with my purchase. Simply put this dado set is definitely a high quality product that can be seen the first time you handle it. I was first overwhelmed on how to install this since I've never used one but after watching a few videos the overwhelmness quickly left. I'm not going to say the instructions are perfect because they are not. The first time I used this I was using the 2 blades and 2 chippers and didn't realize I put on one of the chippers the wrong way, with the teeth facing the wrong way. I actually cut about 6 boards with it this way til I realized what I had done. I take a lot of responsibility in this mistake but I think the instructions could have been more detailed in emphasizing the importance of blade placement of the chippers, especially when you're a rookie and have never used one. The dado set was not damaged at all, in fact the cuts I made didn't even show any ill effect. Now I know! I still give this set 5 stars and money well spent. Once you use a dado set you'll never go back to trying to use your regular saw blade to cut dados and such.

This is my first dado set and I'm really pleased with its performance. I bought the 6" stack because of its high torque; my tablesaw is an old Rockwell Delta and somewhat underpowered. I've used the dado with ash, oak, and sheet goods and haven't had any issues of the saw "bogging down". The only downside of the 6" dado is the depth of cut. With my saw I'm unable to cut anything deeper than a 9/16" dado. Be sure to check the distance between your arbor and the surface of your table before you buy this product as this will affect the usefulness of the dado. I noticed that some users complained about the squareness and smoothness of the dado cut. However I've found that I f you play around with the stack of the shims and chippers, the dado will produce an excellent cut ready for glue up every single time. Play around with the thicknesses and stack ups to find the best possible cut, and record everything for quick setup the next time.

Excelente opción para corte repetitivos o ranuras perfctas

Impeccable je suis content 👍👍👍

muito bom

Happy product could be used on my DeWalt table saw, DW745. It worked very well and easier to use than I thought. Purchased this brand after user made YouTube video with same table saw as me. I stacked the blades to cut 1/2" thick at a time and the work was completed much quicker than simply using a table saw blade. Thus, it was quite helpful. It does take some practice to make cuts as you want. I had to check height after finishing one 2x4. I purchased a throat plate but never used one when making any of the lap joints. Others make their own throat plates or buy them but I never used one.