JOYTUTUS Rear Window Storage Molle Panel Kit Compatible with Wrangler JL 2018-2026(Hard Top Only), Wrangler Cargo Bracket for Recovery Traction Boards Gas Can Shovel Mount 1Pc

Great panel easy set up.. top rubber stops are useless or extra parts since the frame does not touch the top portion. It's very sturdy no rattle, great product

Easy to install and worked well for my Jerry cans. I liked so much that I bought a second set and attached traction boards to the other side. Easy on, easy off by loosening the bolts/nuts. Doesn’t cause damage to the hard top and secures very well.

Nice product at reasonable price just under 80 bucks. Would not pay more tho’! Metal is durable and it fit my ‘24 JL 2 door just fine, pretty much in the center of the window. Hold my spare gas can with a bit of altering the gas can mounting bracket (drilled some additional holes to match the Mollle). I plan to hold two cans on this molle. Seems strong enough - so far. Haven’t had it off road yet.

Install took about 2 hours (including mounting the boards). I was glad they included rubber bumpers and rubber coating on the gutter clamps - not all makes do. It’s a little to small to really be able to effectively mount MaxTrax MK2’s - I wouldn’t recommend it for that because you’ll either need to drill new holes in your boards or end up with kinda half-secured setup as I done (top holes / handles only). Even so - it’s held in place by three knobs that are hand tightened down, which is probably the worst option for something like this where you would want some sort of lock / pin / latch to fully secure it. Some have commented about it being loose - not the case for me - I got it fitted, very loosely tightened down the small screws on the arms (there’s two), then snugged up the screw on top and went back to tighten now both screws for zero movement. All in all 4 stars because no issues, but it being a little undersized for traction boards and a bit heavy (aluminum would have been better) dropped a star - keeping in mind the price. For the cost (I payed $80) versus what you get, it’s worth it. The quality seemed good as well - everything lined up and the welds looked fine. I did have to do some grinding / cutting of the rods - but that’s to be expected when you spend less than $100 and want a seamless fit.

It’s good but could be so much better if they used higher quality parts. I installed this on my 2024 Jeep Wrangler 4xe on the rear driver side window. I mounted two of my recovery tracks to it and kept a careful eye on them while driving , especially when driving on the highway. For what it’s worth, they did not go anywhere. The problems started after about 2-3 months of having them on, I did notice rust coming from the mounting screws that go into the panel, and some rust coming from the top most bracket that hooks into the hard top gutter. I think from the contact and tightness, the paint scraped off and rusted through. I did only hand wash the truck while having this installed, but one day I made the fatal mistake of running my jeep through automated car wash. It made it about half way through before one of the brushes knocked the mount clean off the side of the truck. I was able to recover the mount , and discovered the fatal flaw - the two bolts that connect the arms. Unfortunately, the manufacturer used two smaller sized bolts and no supplied washers or fasteners to secure these two bolts on either side of the mount. This is where my mount loosened and fell off from. Not the manufacturers fault for me making the car wash mistake, but it did show that given the right circumstances this mount could come loose and fly off, which is scary if you drive on a highway and could send this 70mph into someone’s windshield. I think if they used a better bolt/securing mechanism on this for the two connecting brackets, it would be worth the money. Unfortunately, with the cheap hardware they supplied, thin metal, and paint that comes off too easily to rust, this is a 3 star product at best. Apparently there is a newer version of this product, but I do not know if they beefed up the hardware on that one.

We needed a quick, affordable way to carry our flat gas can and this worked perfectly.

The product is marketed as a “scratch-free design,” but that claim does not hold up in real-world use. The rubber that rests against the vehicle’s painted surface hardens under sun exposure, creating friction that gradually damages the paint. After just eight months of normal use, it caused a clearly visible circular mark, a deep etched area where the paint is completely gone. I will be taking the necessary steps to pursue compensation for the damage caused.

They say these don’t fit a 2 door JL, but these pics tell a different story. Fits perfectly, no forcing, no altering. Followed the instructions and it connected with ease. My only complaint is the branding. I prefer no branding at all, but the product itself is exactly what it says it is, and well worth the price.

Leicht zu installieren. Die oberen Distanz Buchsen wurden nicht benötigt. Kanister montiert und ist sehr stabil. Gut finde ich die gummierten Haken zum einhängen.

Bends and almost broke my rear windows

I bought one three years ago and another two years ago. Both have started to rust, and the connecting parts show significant scratching at the joints. Overall, the product feels overpriced for the quality it delivers

Passt sehr gut. Ich hätte mir eine bessere Lackierung gewünscht, da einige Stellen ohne Lack, dafür mir Flugrost versehen waren.