Sauder Homeplus Robot Vacuum Storage Side Table End Table Cabinet for Living Room, Bedroom, in Soft White

I have been looking for this kind of end table ever since we bought our Shark robo vac! I was about ready to build my own but then I found this one! The quality of end table is very nice. It's mostly MDF but good quality. ( I would try to keep it dry and wipe spills quickly ) The vacumm cubby fits my shark robot vacuum well. Although I had to move the vacumm against one of the walls to have access to the removable garbage bin. The assembly took me about 30ish minutes with very clear instructions and the packaging of the hardware was very well organized and labeled. The hinge hardware can be a bit finicky and may take a little bit adjusting to get the top access door and front door to line up right but it just takes some fine adjustments to make it just right. This is perfect for anyone who is looking to hide their robo vacumm but still have it accessible and usable. It was slightly hesitant as my robo vac has a lidar sensor on top and I was afraid it would hit the bottom of the door BUT it clears it perfectly and functions normally!

I love this cabinet so much that after buying one on Amazon, I measured and ordered a second to connect them into a larger storage closet. The assembly was super easy, and the instruction manual even had funny little comments that made me laugh while putting it together. The cabinets look beautiful — the outer frames line up perfectly, and while the doors are just slightly off, you’d never notice unless you were really looking. I use them for extra pantry storage and to neatly conceal my Roomba, which can still get in and out easily. Everything feels sturdy and well-made, and the soft white finish looks great in my space. Overall, it’s a fantastic value for the price!

Glad I bought it and going to keep it, but I definitely have some comments on it. The instruction booklet was overwritten (in a cutesy way) and unclear in functional ways. The two different types of hinges are very similar to the untrained eye, and little is done to distinguish between them in the instructions, so I (like others in these reviews) used the wrong ones for the lid and had to redo that step. There was also a misprint in the booklet, adding 2-3 pages multiple times, which was really confusing (but explained why the instruction booklet seemed SO huge when I first took it out of the box). While the fundamentals of assembly were similar to an Ikea piece, I find Ikea instructions to be much clearer, in spite of the lack of words. I am a very experienced Ikea assembler, and this took a little over an hour for me to do alone. I wasn't rushing, there were definitely some inefficiencies, it could probably be done faster with a second pair of eyes/hands. While we're comparing to Ikea: the quality of materials for this piece are worlds better than most things you'll get there. Heavy, real-wood components (mostly) made for a very heavy package (good lord it was heavy) but makes for a solid end result. I'm a little disappointed in the drawer. I think the whole piece could stand to be 1-2 inches taller, adding some depth to the drawer and making it slightly more useful. I really had to be strategic about getting all my extra filters and other robot vac accessories into that drawer. They fit, but barely. When I restock on filters, who knows. My robot, however, fits inside beautifully. Because it's listed absolutely nowhere on the product listing (here OR on the manufacturer's website!) or any of the reviews, the clearance under the door for the robot to pass through is 5.25"h. I wish it had come with feet or any kind of levelers. I live in a 150yo building and my floors aren't as level as one might hope, so I had to shim one of the corners to keep it balanced. Once done, however, this piece if very sturdy and stable, and large enough for me to keep a stack of square laundry baskets on top of it (as it sits right across from my laundry). Durability remains to be seen, I just built it yesterday, but if I had to guess, this thing is going to last a very long while.

It was a great fit for my iRobot vacuum. I got it as a gift. It’s very sturdy and a beautiful piece of furniture. It stores my extra bags in the drawer. It was difficult getting the drawer in. You basically had to tip in all the way down to get it in. My daughter has the same one. She told me how to get the drawer in. Other than that is functions perfectly. Hides the vacuum when not in use. Love it.

Wanted to hide our iRobot i3 and this is perfect. It feels sturdy and well built, better than IKEA. Instructions were easy to follow. The door can be a right or left open. Built this myself, slowly with 3yo help, in a couple hours that included a break. I did have to angle the base of the vacuum to slide it in place since it fits behind the drawer. The nice part is that it does mute the emptying of the bin by about half. We're considering adding foam to mute additionally.

I bought the tall one, it is perfect and has so much storage!

But the bullet and purchased a robot vacuum but didn’t want to have it exposed since we have 2 toddlers. This was easy to put together and instructions were clear. It’s heavy and sturdily built. Our vacuum fits under it nicely and I love how it looks. We plan on using the drawer for mop pad replacements.

This is possibly the worst item I have ever purchased from Amazon. Don’t get me wrong. I don’t expect Amazon furniture to be high end, but I don’t expect it to arrive horribly broken either. I like to break my own furniture. I don’t need it to come pre-distressed. I called Amazon and they were willing to take it back but I had already unboxed it and tore the box apart like an animal getting g it out. Also, I didn’t want a huge, taped together box sitting in my living room, so I accepted a partial refund and cobbled this thing together the best I could to hide the damage. It was also missing a screw, so I had to find a suitable replacement. The finished product looks okay. The broken corners are in the front, unfortunately, but I held them together with corner covers and covered the cracks with a white address label. At least the screw holes were all in the right spots, so there was that. Otherwise, it was kind of a pain to put together. It’s surprisingly heavy for something so cheaply made. I used the wall anchor because I don’t want to chance it tipping forward if the front corners break off again. I do like that it conceals my roomba and stick vacuum. One last thing- it smells horrible. Like super toxic, burn my throat when I get near it horrible. Hopefully it dissipates, because I haven’t found anything else to conceal my roomba and I don’t feel like taking this thing apart or dragging it to the curb.

At last a design to hide my robot vacuum. I have an Eufy X10 and it fits perfectly. You can access both tanks from the lift up lid and just open the cupboard to reveal the vacuum for access if needed. The which comes out underneath. I only wish there was a matching cabinet for me to use as bedsides but I ordered two and it’s easy to switch which side the door opens. I will be putting shelves in the other side to use it for storage. I like them , they fit my large Phillip stark lamps very well and match our built in wardrobes. I’m going to get handles to match my wardrobes. All in all I’m very pleased and my guest room is finished and eufy is hidden. Thanks for a great product.