• High Solids, natural Oils, finest protection for all wood types. Added UV absorbers..
• Teak Wood Oil gives a lovely mid-sheen finish. Dries in 4-6 hours. Naturally stain resistant.
• Contains no artificial varnish or resins. Low odour when drying, none when dry..
• Penetrates deep, to nourish and protect wood from within. Microporous, lets wood 'breathe'..
• High quality, professional product. Easy to use. Now available to everyone..

Bestwood Teak Oil has a smooth, mid-sheen finish that penetrates and nourishes wood, before sealing and providing a long lasting and hard wearing water resistant barrier. Bestwood Teak Oil is made using the finest Pure Tung and Linseed Oils. It is naturally water, food and alcohol resistant. Teak Wood Oil has added UV absorbers and is specifically designed to give the finest natural protection to all exterior woodwork without varnishing or lacquering the wood. It can be used on almost any wooden surface, including interior and exterior furniture, skirting boards, gates, children’s play areas etc. Teak Oil is easy to maintain. Re-application of one or two thin coats once a year will keep wood looking naturally 'fresh'. Damaged or scratched areas can easily be maintained by reapplication. Teak Oil is suitable for use with all exterior wood, including oak and teak. Surface Preparation: Ensure surfaces are clean and dry and free of dirt, dust, and/or polish. Remove all dirt and grease before application of Teak Oil. For aged wood sand back to a clean ‘bright’ surface and wipe with white spirit to remove all dust and debris. Best applied with a lint-free cloth (e.g. T-shirt material). May also be applied with a good quality brush. Teak Oil should be applied liberally and evenly. When using a cloth, use a circular or figure of eight pattern to work into the wood, and apply until the wood stops absorbing. Allow to penetrate for 20-30 minutes before wiping off any excess with a lint-free cloth. For new wood 3-4 coats may be applied. Allow to dry overnight between coats. Repeated application might bring a slight gloss to the finish. Coverage: 10-15 m2 per litre per coat, depending upon porosity, surface texture and thickness applied. Important: Teak Oil will bring out the natural colour of the wood. Always test the product on an inconspicuous area to ensure satisfaction.