TP-Link BE10000 Wi-Fi 7 Range Extender RE653BE | 10 Gbps Tri-Band Wireless Repeater | 2.5 Gbps Ethernet Port | Internet Signal Booster for Home | Up to 2800 sq.ft, 128 Devices | 6 GHz, MLO, EasyMesh

This repeater is the only one that will actually work and work very good. Yes it’s a little costly, but the cheaper ones will not give you the speed that this does. They will stop working and you will have to buy another. The distance this amplifies the signal is amazing , it’s very easy to setup and allows you to repeat with triband capability. It’s compatible with all of my devices , very fast and allows you to put the same or different passwords for each band type.

I used this to integrate with my existing TP Link router (Archer BE550) and it was just as simple a process as I had hoped. The setup from the Tether app was smooth and required almost no effort aside from deciding which network I wanted to extend. I don't get the same exact speeds as from my primary router, but the fact that you can extend the 2.4, 5, and 6Ghz bands has made it so that everything simply connects to whatever has the best signal at the time. The one downside (and I assume that this is a PS4 issue) is that my PS4 - which is wired to the extender via a CAT8 cable - still only registers fairly low speeds. A laptop in the same room is currently getting 450+ Gbps, but the PS4 is reporting to only have ~50Gbps. For those who care, this device is only ~20ft from my primary router and the connection only penetrates one floor and one wall because my goal was simple to hardwire the PS4 since its network card is garbage. Since I knew where it was going, I can't comment on the functionality for "finding the best location" or even really its ability to extend the range since my primary router gets solid coverage of my entire house and yard.

The TP-link WiFi 7 extender is a reliable and easy-to-use device. It seamlessly connects to my TP-link wired router, thanks to the straightforward tether app. Within about 30 seconds, the extender and router were connected, demonstrating their compatibility. As the latest tri-band model, this extender remains relevant as newer versions are released. Considering the additional cost, I believe it’s a worthwhile investment. While the speed is improved, there are still some areas in my house with connectivity issues. The directions suggest placing the extender in the middle of the router and in the spaces where connectivity is lacking. However, I didn’t use the feature that recommends the best location for connection. I might try that to see if it resolves the spotty areas. If it doesn’t, I’ll move the extender closer to our busiest spot. Our house is filled with smart devices that operate simultaneously, so I recommend this extender for its reliability and ease of use. However, I deducted a star for its limited coverage.

I have a Be900 router which is fantastic. I wanted to extend its range with that device. Setup was easy with easy mesh, 3 bands available. Unfortunately, as much as the signal is strong. Speeds are abysmal, both connected through this extender, but worse, even close to the main router. Not sure if this is due to interference, I tried everything, including updates and restart. speeds went from 1.2G to 10 Mbps. Im returning it and will stay with no range extender. At that price point, I was expecting excellence.

I'm still in awe about how easy this was to set up. Within 30 seconds it was hooked up and ready to go!!! So far it's been working 2 days now. Non-stop excellent range. This product was real and not a letdown.

We have a 3,000 ft2+ house with a large garage and yard. The router covered the house well, but since I have to have my router in the basement there were a few spots that were very touchy, never mind stepping away from the house. I put this extender in at the other end of the house in a spot with a fair connection and my 1Gb service actually now reaches the entire house from 500Mbs to the full 1Gb. HUGE improvement. I will say that I had a dual band older extender that had to be moved because this one just overwhelmed the area. Not a complaint.

I'll give it a 3. Quick and Easy setup and it does show some promise. I purchased this to upgrade from my other unit. It was supposed to have a higher speed. Who doesn't want a few more MBPS. I can connect my computer to the SOURCE router via WIFI and get >220Mbps download/upload. I have the other repeater BE3200 and it would get to ~170-180, lost a few %. But worked great. When I used a cable to connect my computer to the BE3200, I could get close to the 220Mbps. The BE100000 unit shows in the specs that it has higher speed. When I connected this unit to the SOURCE router via WIFI, and used a ethernet cable to connect my computer to this repeater, I could get the 200Mbps. BUT when I set up to connect via the WIFI (5G) through the BE10000, the speed dropped to ~120Mbps. I tried various points within the condo, etc., and a few setting changes, but could never get more speed to even match my old unit. I am not sure why, but maybe due to the way it may want to fine tune itself using a MESH strategy? I am now happy with my other even though it loses ~10-15% speed via WIFI connections; some loss is expected. I was hoping that I could get closer to the 200 value. Maybe may have to try another brand.

For the people wondering what the deal is, 5GHz Wifi (Wifi 6 and below) and 6GHz (Wifi 7) signals weaken the further away you go from the router, esp. through a wall or 2. To maintain the connection, your devices speed is throttled. For my situation, I choose the extender instead of mesh. I like to unplug it when it's not being used. My router is ~25ft away from the living room. 5GHz signal is about 1/2 to 3/4. 6GHz is < 1/2. This extender brings both up to max strength and the speed is also noticeably improved. Set up takes a bit if you have a TP-Link router (I do) because you have to use the app to add it to your network. Doing that once is all it takes. I can move it to any plug in the house if I want. 1 more thing. TP Link has Easy Mesh and One Mesh. This Wifi7 Extender has Easy Mesh and will allow device settings changes within the app and does all the meshy stuff. Can't do that with the One Mesh on an Easy Mesh setup.