• Thermostatic Cartridge for Push Fit Taps & Shower Valve.
• Optional Grub Screw available upon request. Please simply send us a message if you want one..

Product description ------------------- Thermostatic Cartridge from OurTaps: Principally made from brass, this generic Thermostatic Cartridge is suitable for many manufacturers. It comes with a new Handle, Stop Ring, Grub Screw for Handle & End Cap. The operating Temperature range is between 20 to 48 Degrees C, with safety override button at the 38 Degrees C position. The cartridge comes calibrated to 38 Degrees C with the handle and safety 'stop ring' already attached. The required minimum operating water pressures are 0.5 bars. To install it with a Bath Mixer Tap or Torpedo style Bar Shower valves, all you have to do is remove the grub screw on the body underneath (3mm Allen key is commonly required) and push it into place. With the concealed shower valves, the handle has to be removed and then the cartridge fitted separately. Lubrication may well be needed around the black rubber seals. Always ensure your water is off when fitting!! It can also be used to replace some older style cartridges (see picture). The Total Length of the Cartridge itself is some 93.7mm. Widest section = 33mm diameter (round the thicker brass section where the grub screw hole is located). Base of cartridge to centre of Grub screw hole = 60mm. The 3 Black rubber washers are positioned at approx 7mm, 27mm and 47mm from the centre of the grub screw hole. Please check the image above and the dimensions below before purchasing and carefully compare to your one before installing. If you need a Securing side grub Screw please send us a Message. Legal Discler ---------------- We operate a 30 days Returns policy where you are required to notify us within this timeframe and return the goods to us within a reasonable time thereafter. Provided the goods are returned to us at your cost and risk, and they are in an unused 'as new' and re-sellable condition, we will refund the purchase price paid. Goods that have been used or where installation has been attempted, or are damaged in any way by you, are not returnable. With Thermostatic taps and showers, please be aware that they usually require reasonably high water pressures. Please do not install one if you aren't sure about your pressures. If you do, and the pressure is insufficient, then it is NOT returnable. It does not mean that the item is defective!