2 PCS Resin 3D Printer Flex Build Plate, Spring Steel Flexible Plate Flex Bed and Magnetic Base Platform for ELEGOO Mars 2/Mars 2 Pro/Mars 2 Mono/Mars 4 DLP 3D Printer, 140x84 mm

Description

HIKUDIY 2 PCS Resin 3D Printer Flex Build Plate, Spring Steel Flexible Plate Flex Bed and Magnetic Base Platform for ELEGOO Mars 2/Mars 2 Pro/Mars 2 Mono/Mars 4 DLP 3D Printer, 140x84 mm How to install 1. Please clean your build plate thoroughly, and let it dry. 2. Please connect your magnet to the plate, and let it sit for a couple of hours（More than 24 hours is better）so it is fully seated. 3. Please install the spring steel plate on the magnetic base 4. Please reset the printer's leveling settings to start printing Skills in use: 1. When installing the soft magnetic sheet, it is necessary to ensure that the printing platform is clean and dry. After installation, it is best to keep it in an inverted state, or it can be fixed with a clamp to ensure that the soft magnetic sheet is fully attached to the printing platform. 2. Please ensure the spring steel is completely aligned with the magnetic base to avoid the resin entering the gap during use, which will affect the magnetic force of the soft magnet and cause the spring steel plate to fall off. 3. If there are burrs on the surface of the spring steel, please use sandpaper carefully to make sure that there are no burrs before using it to prevent the burrs on the spring steel from piercing the FEP film during the printing process. 4. After printing, do not excessively bend the spring steel when removing the model. After use, use alcohol or cleaning fluid to remove the residual resin on the surface. 5. After using it for some time, if the model falls off the spring steel sheet during the printing process, you can sand the spring steel sheet with sandpaper to ensure that it has sufficient adhesion. What's in Box: 2 * spring steel build plate 2 * soft magnetic sheet Review: Great bit of kit but an easy mod is required. - You need to add a spacer of at least 2mm to the z-axis bracket to accommodate the extra depth of the magnetic plate. Once set up the plate works perfectly, at the end of the print a little wobble of the plate and the prints pop off with ease! Review: Great plate. Have to modify your stock build plate bracket to use. - Love this build plate. Don't ever have to remove the build plate itself. Seems like it has eliminated me having to periodically level the plate. You will have to modify the holes in the plate though because with the added thickness when it homes it pushes into the lcd if you don't because it can't move up enough. Not by much but enough I didn't want it pressing on the glass every time it homes.