EZ-POUR® HI-FLO Spout with Extension & Vent Kit, Multi-Purpose Spout, 1 Pk

I originally picked up a gas can from a local store, and honestly, it felt like a total waste because of the factory spout. It leaked, dripped, and made transferring fuel into my equipment an absolute mess. I was ready to give up on the can altogether — until I installed the EZ-POUR Gas Can Spout Replacement. What a difference. This HI-FLO system completely changed my opinion of the gas can I purchased. The flow is smooth and controlled, and there’s no more spilling or fuel running down the side of the can. The seal is solid, and everything feels secure and well-designed. It actually works the way a gas can should work. The included extension is an added bonus and makes fueling even easier, especially for equipment with awkward fill angles. The flexible nozzle and flame arrestor give extra confidence and versatility. Never again will I deal with those original “junk” spouts that come standard on so many cans. This replacement is a total game changer and absolutely worth it. Highly recommended!

This is the project farm winner, and it has lived up to the review for me. If you’re still fighting a safety nozzle or letting it starve for air and gurgle do yourself a favor and get this now. Why this one over the others? Because it has a better vent that allows faster flow and it has an extension which comes in way more handy than you would think with a 5 gallon jug trying to fill a lawn mower or genny. Helps prevent spillage.

Wish I could give it the full 5 Stars but read on to find out why I can only give it a solid 4 stars. I have several 5 Gallon EPA mandated CARB compliant gas cans. The amount of time it takes to empty the 5 gallon gas can is absolutely mind boggling. I know safety first but when you are holding ~30 pounds of gas and trying to empty it into an ATV, Car, Motorcycle, Lawn Mower, whatever it gets really annoying. It used to take upwards of 5 minutes to dispense the fuel. I came across the EZ Pour Spout and saw there was one that was for gas cans and then there was a "HI-FLO" version. I opted for the HI-FLO version knowing that the spout 7/8" would not fit into a car's gas tank (I knew I could make it work). I have 3 Blitz Can's and 1 MidWest can all of them 5 Gallon tanks. While it includes two collars (Yellow and Black) the Yellow one fits perfectly on the MidWest Can and the Black one fits great on the Blitz can. The problem I am encountering is that the Black collar leaks while on the gas can. It is screwed in completely and it is attached perfectly but it still leaks around the collar and from the spout. I purchased one these kits and just re-use it on the different cans. I find that it works best with the MidWest can and I have no leaks at all. The other great thing is that I can dispense 5 Gallons in 35 seconds. Yes you read that correctly. 35 SECONDS. It makes filling the tank fun again. Make sure to install the vent. The kit includes 7/8 spout, 7/8 spout extender (not used in my case), 2 collars for different cans, spout cap with holder, flame arrestor, and a push in vent (definitely recommend). Let me know if you have any questions and I can help answer. I've had this for about 5 months now and haven't had any issues except using it on the Blitz cans.

Easy to replace old nozzle. No leaks. Great value. Fits perfectly.

I have 4 five-gallon gas cans (all of them the "new" style) that I leave in the garage for our portable generator, snow thrower, and other various gas yard equipment. I bought one of these kits to make sure it would fit and work first before I ordered any more of them. Worked like a charm and just ordered one more kit. On two of the cans, this product worked great. So far very happy to have my cans back to the way they were before the gov't got involved and messed it all up. Of course, since they are the "new" style cans, I had to create a new vent hole on the opposite end. I used a 1/2" wood paddle bit (a.k.a. flat wood or spade bit, which is mentioned by name on the manufacturer's FAQ page on their website) and was able to install the little included push-in vent without a hitch. After reading some other reviews that said not to drill the hole directly on the center seam of the can, I followed that advice and drilled just slightly off to the side. I still have a few inches of gas inside the can and I know there's a chance that a little bit of plastic debris may have made it's way inside during drilling (a lot of it fell outside the can though) but I'm just going to tempt fate that the screening will catch it all until it's empty and then I will rinse and clean it out thoroughly and let it dry for about a week or so before filling it back up again. As for the other two gas cans, the kit would not fit them, and after looking at the manufacturer's compatibility info on their web page, I don't think there are any workarounds to it. The 2.25" inch mouth on the can appears to be too big for any of the manufacturer's kits or adapters to fit the mouth of the can. This is the can that it would not fit: https://www.amazon.com/gp/product/B000W9JN4S I bought it back in 2011. That is why I only ordered one kit at first to check compatibility first instead of any multi-packs. Turned out to be the right move instead of having to deal with returns now. Make sure that you check that the spout is a correct fit for your can prior to drilling any holes. Overall very happy with the purchase and would definitely recommend to anyone who wants to go back to the way it was when gas cans were simple and easy before the gov't got involved.

Empties out cans fast. Great for tractors!!!

Sealed good, no leaking

Was looking to upgrade. Gas cans still leak, had to buy adapters for that should have come with.

this is good option for filling diesel without spillage.

Great product. Prevents spilling gas when refilling lawnmower and outboard etc.

Seems to works well my older cans.

Useless for me