BA80 8 GANG SWITCH PANEL

Awesome product, works as intended. Genius product as it makes wiring and accessorizing so much easier. With this product all the wiring in the engine bay is neat, clean, and organized. I highly recommend and would buy this product again!

Game changer for vehicles that are not equipped with factory upfitter switches. Easy install, Quality product with tons of labeling options.

Works great easy to wire in and keeps your wiring super clean

For the price, quality of this product was excellent. Made well with good materials. Functionality is key.

Super straight forward to install and wire up, also nice and clean. I didn’t look at the instructions tell after I was done and putting the extra pieces back in the box, instructions are detailed and has colored pictures on every step. Only down fall, is you can’t turn the back light off. My application for the switch panel requires to have a constant power to the panel, for strobe lights and work lights off my service truck. Can’t have key turned on for hours on end, nor have the truck idling. So will have to wire up a separate ON/OFF switch for that. But besides that very happy with the panel as a whole and will be putting them in our Jeeps next.

This is the new version with auto dimming/brightness. Previous versions had a white wire that you had to provide power to and pulse for changing the brightness. Glad they redesigned that. I wish it had a ‘light’ wire though so it’s not staying lit whole time car is on. It would be nice not to be backlit until vehicle lights were on. Guessing it was a design choice to keep limited wire runs. This version has a memory. If car is on and you have things active. You can press middle button and it turns everything off at once. Press again and it turns on everything that was on. When you turn car off and back on everything defaults to off. So if you have fans or coolers you need to remember to turn them back on. I have ran it for a couple of hours and it does not produce any heat. Very simple setup with very few wires or connections. I used the provided bracket (which is hidden under all of the foam) and hid the whole switching unit under some panels A few things I don’t like about this whole system. 1.The circuit breaker cover is too snug. If you push it all the way down it resets it, be sure to just set it on top but not push down all the way. Glad I tested it all out before putting cover on, otherwise that would have been confusing. 2. It’s not customizable. You get 2 each 5a, 10a, 20a and 30a fuses. What if you don’t need all those higher amperage ones. And you can’t move them around, you’re stuck using the switch in the order they set. 3. Short power wire from battery to circuit breaker 4. You can’t really add a fridge to it even though there’s a fridge label. Reason is, this panel only works with ACC so your car needs to be on. Not good for a fridge to always have your car running. I suppose you can have fridge wired in then when get to camp site move to other power source. 5. The power and ground cable ring are small. Will fit over 10mm bolt but not 12mm. I ended up widening the ring to fit on my battery terminal. 6. Not sure if it will support air compressor. My compressor has already an inline 20a fuse so my assumption is it will work but have not tried yet. 7. The brackets that come to mount the switch are good and bad. It has a couple of options / ways but it will most likely require altering your car. Overall though, nice alternative to the higher priced switching panels. it comes with high quality parts. Not all plastic. Easy to install. Looks good. Easy to use. If you have 2 or more accessories it’s worth it for a clean nice look with fewer wires and switches every where.

Great quality and no issues... putting on the stickers straight is a pain but that's it

Purchased after several friends spoke high praise of the system. I am using mine to control accessories on my secondary battery/electrical system. Winch, lights, anything I may need while the vehicle is off but don’t want to worry about killing my starting battery. Very straightforward installation and makes it simple to add accessories. Beats putting together a rat’s nest of wiring or making a homemade custom fuse box.

電装が増えスイッチの管理をトグロスイッチの配線が増えすぎて限界を感じていたため、導入しました。管理が抜群に楽になり、これは最初から導入すれば良かったです。有線式にしたのですが10ftのケーブルがついてきますが長さがギリギリで15ft欲しかったです。 中のヒューズが低背ヒューズではなかったのでそのまま使えず追加購入が必要になりました。ヒューズボックスの上にマウントするとスッキリ使えてまとめやすかったです。

Nice and very easy

No, Auxbeam does not make ultra high-end / premium auxiliary light controllers. What they make are simple, straight forward controllers that works and don't break the bank. I went for a more basic 8 switch unit. The switch panel is nice and solid with good mounting options. The mount pattern is pretty standard, so there are lots of aftermarket mount options as well. Running just one control wire through the firewall was nice too. The relay / control box is pretty standard....plastic shrouding isn't too bad, but may not be suitable to mount a bunch of stuff on top of. Breaker looks decent too. Instructions were straight forward and provided good information for personalizing the fuse arrangement to get the switch panel to match the layout I wanted. Considering it has weathered a cross-Canada trip where I was in 4 days of rain, running various lights (some extended time, sometimes lit up like a Christmas tree so I could be seen), I'd say it can take a pretty decent workout too. Overall: good quality, decent price and it works...if you don't need adjustable panel colors or flashing or momentary on light functions, then this is the way to go.

I bought 2 of them to be installed in my JKU 2014 jeep wrangler rubicon, i installed 1 in the engine for exterior wiring (ex: bar lights, innerfenderlights....etc), and the other one inside the jeep for interior wiring (ex: dashcam, interior lights....etc) And i love it and recommended by my Mechanic

めちゃめちゃ便利。 カスタム欲を掻き立てられます。 もう少し安いメーカーの物でも良かったかな？とも思うが、これはこれで良し。