Standard Replacement Spout & Vent Kit, Multi-Purpose Spout, 1 Pk

I bought this spout because I had a good experience with my other EZ-pour spouts in the past and needed one that was narrower than the original EZ-pour because of the unique design of the gas “cap” on my vehicle. The original EZ-pour fit into the first flap of my vehicle’s capless gas tank, but gasoline wouldn’t go in very fast. When I investigated further, I found a secondary anti-siphon flap in the filler neck on my vehicle. I bought this in the hopes it’d work and I was not disappointed. I was able to dump a whole 5-gallon gas can into my 2017 Dodge Durango R/T in under 2 minutes because this spout pushes both flaps open and allows the fuel to flow freely. You absolutely need to install the vent on the gas can though, otherwise you’ll have a lot of difficulty pouring. The spout is very flexible and I was able to adjust it with ease while pouring from my gas can. It seems well made and was easy to install. I’ve tried it with several cans, including Midwest and Scepter with no leaks. Best of all, the tip is compatible with the filler neck on my vehicle and likely its sister vehicles (Jeep Grand Cherokee with capless fuel tank). I recommend it. A word of caution though—don’t leave them out in the elements. I see complaints about the spouts cracking and whatnot; I’d bet money that those are from people who left them baking in the sun all summer or out in the snow all winter. Keep them in a controlled environment when not in use and they’ll last a good while. I’m so happy that I don’t have to fumble with the “other” “safety” or “environmentally friendly” spouts anymore.

YES well worth the price, and easy to use. It replaces the horable gas tube that you have to hold in and push down the yellow thing. This one just screws on inplace of the one that comes with your gas can. Note, it comes with a plug for the hole you will want to drill in the gas can. So it can breath, I have not drilled the hole, and so my gas pour is slow, but it works great. I have not had one drop of gas leak out of the seal between the can and the gas tube. The gas tube is plastic just like the original.

I happen to step on my Blitz 2 gallon gas container... long story & I managed to damage the existing EZ-POUR replacement spout. I thought it was just a damaged gasket, but the flange on the spout was damaged. Time for a replacement! The pro: + Reasonably priced at $9.95 with free shipping when I purchased this from Great Brands USA. + I didn't receive a "white" spout, I received a "black" spout! In addition, the spout gasket has been improved! The gasket is wider & thicker! + The black cap fits our old Blitz 2 gallon plastic gas container! + Advertised - EZ-POUR replacement spout and vent kit let's you update old cans. + Advertised - Easy Flow Action that won't break down or spill. + Advertised - Includes spout, cap, secondary cap, replacement vent, secondary base cap, and flame arrester. + Advertised - water jug spout that works on cans of all varieties. The cons: - Made in China. ◄ For those that prefer to buy products made in the USA. - Didn't come with a lanyard for the spout cap, as the previous kit I purchased? Closing remarks: ▪ Overall, I'm happy with this replacement spout kit. I actually prefer the black over the white spout, especially for a gas container. ▪ I normally don't give a 5 star rating at first, preferring to wait awhile... just in case something fails after it's been in service awhile.

Work great and has a seal off cap

I purchased this to salvage my despised 2 gal. Blitz "water can" from the big-brother idiocy of the CARB and EPA. It works well. A couple things: First, the instructions indicate that the yellow cap is intended for a Blitz can. I found the black cap to fit better. Both seemed to fit the threads acceptably, however the yellow cap bottomed out (just barely) on the top of the can and left the top sealing surface about 1/16" short of the can neck. This would potentially result in a leak due to being unable to sufficiently tighten the cap to compress the seal. Check this very carefully on your installation. The spout flange and seal looks reasonably durable but I have yet to have any experience with it in use. Second, the instructions for installation of the vent indicate the can should be dry and empty before installation. I would highly recommend that you fill your can with water before installing the vent. Any drill can create a spark from the armature and you do not know what the vapor content of your water can is at any point. It is not that difficult to verify there is no plastic debris in your can once it is dry, and anyway your new spout has a screen in it. BTW, if you need a longer spout, buy two of these. They can be threaded together to make a double length spout. I am generally not a "Liker" or "Poster" but all in all a pretty satisfying purchase in my book.

Works great with water jugs....Yeah, yeah, that's it, waaater jugs... Seriously, I don't spill gas everywhere when I use these, unlike the clumsy EPA mandated and approved junk that the manufacturers have to sell with new gas cans.

These fit my fuel cans well without any spillage.

Purchased to replace the annoying and difficult fillers on standard gas cans. The gas fill port on my van is below a bulge in the sidewall so filling from the cans is a real pain in the a__ in general. This works much better, but it's still not long enough to make it simple and easy to fully empty the can. EZ-Pour does make a double length filler but the tube diameter is to large for my van fill port. Wish they made a long version with the narrow diameter.