Click Here!

Worked perfectly has a great pattern, and they all work, unlike some other brands which San Francisco cost more totally satisfied highly recommend.. They work exactly as another video from a customer submitted. The 1/4” lines are great. Flexible but strong which makes attaching to emitters easy.

I've been using drip irrigation and various kinds of sprinklers for many years. These are the best I've found - a nice surprise given how cheap they are! They are performing at least as well as the spray heads I bought at the hardware store for $1-2 a head, with good coverage and adjustability. The barbs are a little wider than most drip heads I've used, so they do take some extra effort to shove onto the end of the tubing, but they are quite sturdy - haven't had a single snapped barb after installing a dozen heads - and certainly look like they won't come loose. I particularly like their strong coverage - when I adjust them to a wider circle, they still do hit the interior of that circle and not just the edge, so I can use them for row crops or turn them way down and use them like bubblers for individual plants.

These are not the same fittings at the ones that come with the irrigation kit from the same company. They work but with a little finagling. I think they’re designed to just slide the hose right over the fitting but it doesn’t create a good seal so they leak. I’ve been hitting the end of the hose very quickly with a blow torch just to make it a little malleable and then sliding it over the fitting. This helps mold it to the shape of the fitting creating a better seal. Other than that they work as expected, a couple out of the pack don’t spray quite right or don’t tighten down to close them off but other than that the rest work as expected. I do with the fittings were the same as the others but they are a good substitute and I would buy again if I needed more.

Honestly, it is very rare nowadays to find a outstanding value in a great product, but this is definitely one of those. I usually don't buy cut flowers for my wife for Valentine's day. See loves plant and after 20+ years, she has a ton of them. What see does not have is a way to get them all watered without holding a hose on them which takes a lot of her time. Therefore, I decided to do something a bit different. I went looking for a solution to her watering problem. I bought her a very large bag of MIXC 200PCS Drip Emitters Fan Shape with Stake Water Flow. She was a little perplexed at first but when I showed her the video on how they work, she was thrilled. They are great quality and very easy to install and use. It is going to take us a little bit to get this all setup, but when we do, she can enjoy her plants a lot more while relaxing instead of tolling every day in the heat to keep them hydrated. It is clearly the gift that keeps on giving. Thanks MIXC for a great solution to her watering needs.

4 years ago, I bought a bag of 50. They are functional but their connectors to 1/4" tubing are poorly designed. The barb a little too large and its connection to the sprayer is a little too thin. You must patiently wiggle the tubing back and forth to work it over the barb. If you push or wiggle using too much force, you will snap the connector off. The connector will definitely snap in two if you try to work the tube back off the barb. There are other problems with the sprayer. While the flow rate is adjustable, I have found that sometimes I need to try different sprayers from the bag until I find one that turns down low enough to use in a large pot. The spike has broken in half while I was attempting to press it into hard ground.

These emitters work very well to provide a nice little fan spray!! Shipping was fast, installation was easy! One thing that is great, they have a 7-inch stem, instead of a 5-inch stem. That allows you to placethen so you have a little more height, or you can stake them a little deeper to make sure they don't move. Flow adjustment is easy, and they provide a perfect measurement of water over time. Be sure to heat the tubing in a pot of boiling water, before you put the tubing on these. As always, the barbs are not particularly fragile. But, it never hurts to be careful. And, tubing is always more pliable and easier to install, when hot.

I have used these drip emitters previously and was disappointed with what I received this time around. MIXC redesigned the product but continue to use the old product images to advertise and set false expectations of what you will receive. Unless MIXC changes back to the previous model, I will not be purchasing these emitters again. Please note I pulled the attached product image from another Amazon review as it perfectly displays the product change. The old model is pictured on the left and the new model is pictured on the right. The product images on Amazon display that these have a 45 degree barb to connect to the 1/4" hose. What you actually receive is a 90 degree barb. These used to be just over 7" long but the product you receive now is just over 5" long. The new model is much lighter and the barbs break when attaching the hose even if you use heat. Lighter in this case translates into emitters that are weaker in design and prone to breaking. Many of the emitters had issues with water flow rate as if they were clogged.

Exactly what I was looking for to replace drip nozzle.