Ibywind Screen Protector For OnePlus 6T[2 Pack],9H Hardness Tempered Glass,Easy to Install

Despite saying it's for the 6T it does fit the one plus 7. I have used a similar one previously that was specific to the oneplus7 and the guide for applying it is brilliant. If anything I think this is an even better fit than the one I used before. It also comes with a tiny little liquid applicator to remove the unstuck edges that leave white lines. I didn't really need it much on my phone because the fit was so good but I used it anyway and it worked really well. However I used it on my wifes phone because her screen protector had a massive bubble in the top corner which didn't seem to want to stick down. It sorted it in seconds and was so easy to do. definitely recomend this. It also comes with a protector for the back (which I could have done with previously, having cracked the back of my OP7) however I don't think it is compatible with the OP7 because the protector has a smaller camera cutout to match the 6T. I still highly recommend this though

My wife needed a replacement screen protector for her phone. Did the research and settled on this product. Really easy to install and no reduction in screen sensitivity. My wife feels it is better than the factory fitted original.

Good product lousy description. If i had a 6T I'd be thrilled. But the 7T is that much bigger.

My father bought this on his account as he needed to replace the screen protector on his phone - it used to be mine, and when I gave it to him the protector was already cracked in the corner. I recommended this brand to him as I have an Ibywind screen protector on my 8T, and have nothing but praise. He asked me to install the protector for him while he was getting his stuff together to go out for a hike. Setting it up was pretty easy - it's good the pack came with two wipes, as the edges of my father's phone and the screen under the old protector were so filthy I had to use them both. The instructions were really clear and easy to understand. The only thing that gives this a four star instead of five is that the easy installation guide for the protector (the plastic bit you put around the phone) doesn't tell you which way round it's supposed to go. I don't think it matters too much, but I definitely had to push the screen protector down a little so that it would sit on the screen, which unfortunately allowed a microscopic hair to sneak underneath, but it was barely noticeable when I was checking my dad's phone over for air bubbles. Overall, I'm really impressed with the quality of the screen protector - as I mentioned above, I have one on my 8T - and it was really easy to install.

The screen protector was easy to install following the provided instructions, all necessary kit provided. No problems with air bubbles or dust. I found the provided template centred the glass exactly. Also provided was a plastic protector for the back of the phone, this required more effort to apply, but no issues with this. Once the glass was on I put my Spigen liquid air case back on with no issues. The fingerprint reader works exactly the same prior to the glass being put on. Overall very pleased with this purchase.

I've bought a few other screen protectors from Ali Express, but found this from Amazon to be the best. The aligning guard works quite well and this protector does make fingerprints less visible.

If I could give it more stars, I would. I've never used an easier to apply screen protector. I have always found it difficult to find screen protectors for my oneplus that fit correctly, and once I find one close-ish I still have to put up with little bubbles on the edges etc. This was incredibly easy. Not one single bubble. No lift on the edges. No issue using it with the case. It doesn't even feel like I have a screen protector on my phone. Thumbs up from me.

Avoid this tempered glass, i installed the glass perfectly and after a couple of days a halo effect appeared around the edges of my screen, this happens with poor quality tempered glass and there is not much adhesive around edges of the glass.

Great price, fast delivery, and so far the best screen protector I've tried! Super easy application with the included frame guide thing, and the protector in my opinion sits perfectly. The edges of the protector seem to sit squarly on edge of the display and mine has zero bubbles (though I have a lot of experience with applicating screen protectors). And you get two of them which is just gravy. If it lasts it's a solid 5/5 stars. I'll update if the protector falls of starts behaving weirdly! Update: unfortunately, I'm gonna have to take back two of the stars.. like some other reviewers claimed, the glue Ibywind used seem to be quite weak. After a few days, some air bubbles started appearing around the edges, and promptly grew in size and quantity... After a little more than a week, they seem to have set. The protector is so far staying on, but the bubbles are kind of bugging me I have to admit.. I'm hoping the second one fairs better! But buyers be aware! You might get a dud.. Update 2: huh... It appears that most of the bubbles has disappeared, only a small one in the bottom right of the screen is showing. My tip to anyone who buys this protector, and notices some bubbles forming after a week. Leave it on for a few more weeks and it's seems like the problem kind of solves itself hah!

Il y a peu, j'avais essayé d'installer un verre d'une autre marque sur mon OnePlus 6t. Difficile et lecture d'empreinte impossible. Et là, miracle ! Installation super simple et quasi inratable, lecteur d'empreinte fonctionnel. Le verre s'adapte parfaitement. Et le toucher...de la soie. Excellent produit.

Gotta be the best screen protector experience. Super clear, super smooth feeling, works fine with fingerprint. Goes on just in the right place with the install tool, covers the whole screen. The day I put it on I had a bubble that appeared to be from a missed speck of dust, but it went away the next day and hasn't come back. Sticks well, not too well to adjust during install though. Quite a premium screen cleaning kit too!

The OnePlus 6T already has pretty good gorilla glass, but I'm kind of paranoid and worry about random scratches. I've been using the pre-installed plastic factory screen protector since I got the phone, and it scratches too easily, takes on so much oil from the fingers that the viewing experience is affected. The teal easyinstaller guide was super easy to use (just make sure the arrow is align UP for the top of the phone). Instructions are really easy to follow and it comes with alcohol wipe, micro fibre cloth, and sticky tape to remove dust. All I did was "plop" the tempered glass screen protector onto the guide then did some wiping/pressure onto the screen protector to help the adhesive bond. I had to re-register my fingerprints after the screen protector installation because it was taking too long to log in (a different screen protector will probably affect how the in-screen fingerprint reader interacts with the previous fingerprint data). After re-registering, log-in speeds were about the same as I had with the factory pre-installed screen protector.

Gerät: Oneplus 6T Schon so einige Folien auf Smartphones aufgetragen, aber die hier hat mich sehr begeistert. Das ganze kommt in einer Hartplastikbox, worin sich Rahmen, ein Umschlag mit 2x einzeln in Schaumstoff verpackten Folien, zwei Komplettpakete von Tüchern (je Feuchtetuch, Mikrofasertuch und Sticker), ein Sticker(?) für den Handyrücken, eine "Pipette" mit Öl für den Folienrand nach der Installation und eine Anleitung befinden. Zuerst ein Lob für den Rahmen, das man schnell auf das Smartphone aufziehen kann. Das macht es ein vielfaches leichter, statt ständig mit Fingern versuchen die Folie parallel zum Handyrahmen zu halten. Das Feuchtetuch ist auch ordentlich befeuchtet. Hatte so einige Pfützen darauf, das man mit dem trockenen Mikrofasertuch abwicht. Sollte noch Staubkörner drauf sein (hatte ich noch nie), ist noch ein Sticker bei. Die Tüche + Sticker waren nochmals gemeinsam verpackt. Folie ließ sich einfach auftragen. Ich hab es von oben nach unten aufsetzen lassen und musste doch dann etwas nach unten streichen. Da behilft man sich am besten mit den Fingern (vllt. mit Mikrofasertuch darunter) und zieht es gleichmäßig nach unten, damit keine Blasen/Kesseln entstehen. Ganz konnte ich die Blasen nicht vermeiden. Es half bei den meißten sie zum Rand rauszudrängen oder nochmal von allen Seiten drüberzustreichen, damit der "Kleber" auch noch dorthin kommt. Aber besonders an den Ecken musste ich nochmal anheben, was ja sonst als No-Go gilt. Doch ging es gut aus. Ich hab die Wiederanbringung der Ecken mit einem gleichzeitigen Streichen nachgeholfen, wodurch sich diese Luftlöcher doch noch schlossen. Zum Schluss diese "Pipette" mit "Vegetable Oil" rausgeholt, das eine weiche Spitze, wie bei Tintenkillern hat. Diese Pipette lässt sich ordentlich beugen/knicken, mit der man am Rand von unten nach oben entlangfährt. Wie in der Anleitung beschrieben, geht man mit dem Trockentuch dann nochmal drüber, um die zu große Menge wieder wegzuwischen. Anbringen der Folie hat halt bisschen durch die Luftlöcher gedauert, aber das hat man bei vielen. Bei vielen hat man allerdings nicht die Möglichkeit nochmal kurz (mit Fingernagel) die Folie an den Ecken teilweise anzuheben und nochmal zu installieren. Fingerabdrucksensor unter dem Bildschirm funktioniert bestens und die Oberfläche ist beim Bedienen des Touchscreens schön glatt. Das Mikrofasertuch behalte ich übrigens für unterwegs. Nicht groß, aber auch nicht klein. Den oft gemeldeten weißen Rand habe ich nicht. Aber genau dafür gibt es extra diese "Pipette", mit der man am Rand entlangfährt. Mal schauen, ob ich mich in ein paar Tagen oder Wochen wieder melde. (Stand: 14. Dez. 2022)