SPACEKEEPER Workbench Casters kit 660 Lbs - Retractable Casters Heavy Duty Bench Caster Wheels Designed for Workbenches Machinery & Tables, 4 Pack

Template very useful. Be sure to cut along the dotted line for correct installation. Everything true to description and works well. Easy to install and the screws provided were actually decent quality. Also the wheels roll smoothly.

These casters are well made, surprisingly heavy and work very well. I have a single car garage and have many tools, cabinets and workstations. I used these on a metal worktable and on a bench for my router. I can move them easily to wherever I need them and then lock them for a stable worktable while they are in use. Very stable. They are larger than most casters but gives you confidence that they hold the amount of weight they claim. The price is very reasonable too.

If I could have given 4 1/2 stars, I would have. The instructions are not quite adequate. Had to look at the photos of the product on Amazon to know which side of the bottom plate was up, as instructions were unclear. Installation was straightforward. Can be installed with accompanying tools, but I would suggest getting out your own wrenches/sockets (metric) for a slightly easier job. Not really excited by the quality of the bolts, though they seem to be holding up right now. Seem cheap. Otherwise, all good. Had to lift up on a fully loaded table to get the wheels down; my full weight (185 lbs) was not enough to do it by foot pressure alone. Overall, a good idea, and worth the money, even if they could have splurged a little more on the bolts.

I constructed a heavy duty lathe workbench from Fir 4 x 4s and 2 x 4s plus two layers of 3/4” MDF for the top. I selected the Model 3000 Premium Workbench Casters primarily for their retractability, weight capacity of 660 lbs heavy duty construction and designed around 2.5” wide legs or greater. The Casters were easy to assemble but I would recommend assembling one first to understand the design. Included with the parts were two wrenches for tightening nuts & bolts however I also used a metric socket set as well. The Easy-Install Template is a snap to use and accurate. I used Frogtape to draw center lines and hold Template in place on the legs because the legs were finished. Since my 4 x 4 legs actually measured 3.5” sq. I was able to use the 4 corner holes. With Template in place I used a center punch to locate the holes precisely through the Template. The Wood Screws included with the Workbench Casters were a disappointment. The Phillips heads were easy to cam-out despite a new driver bit and clutch setting of the drill driver. I opted for a heavier #10 x 1.5” Drill Screw with 5/16” Hex Head and continued driving screws with nut driver bit. I found it much easier to attach the Leg Mounting Plate to the bench leg first, drive in the screws and then assemble the remaining caster parts because the 5/16”Hex Head required more space between the Pedal Bracket Assembly and Leg Mounting Plate. Your choice. The Movable Pedal of the Workbench Caster has a cam like bottom edge that exerts considerable force on the Wheel Mounting Plate when pushing down to elevate workbench. I noticed a metallic rubbing sound on one caster assembly. I applied a fine bead of white grease to the bottom edge of the Movable Pedal to lubricate that mating surface. The Model 3000 Premium Workbench Casters are well made, function exactly as designed and compliment my lathe bench. The completed workbench and lathe weigh in at 256 lbs well within the capacity of the casters. It’s possible for me to elevate the workbench and move it away from wall for cleaning.

Easy to install and they work great, rolls nice and smooth.

Just finished installing them on a work table project, the tools provided are sufficient to do the job. The castor seemed to be a good quality and they installed easily. You do need to watch for the different lengths of screws and adjust the tension properly on the foot lovers other than that pre-drill pre-drill pre-drill or replaced the screw screws with self drilling screws. I think I'll buy these again if I need to build another workbench.

I have a large cement-floored barn. I had some extra kitchen/dining room tables that I wanted to use as worktables instead of letting them just sit disassembled gathering dust. But I wanted to keep the floorspace of the barn easily re-configurable since I do oil changes and other vehicle maintenance in the building and need to be able to quickly clear floor space. For the first table, I used some old, but high-quality metal-framed-with-bearing office chair casters. They work and they were free, so I am just going to keep using them. But for the second table, I ordered these. The better relative usability and suitability is clearly evident. The first table with the re-purposed casters rolls but is hesitant to move and I can’t let it down on the legs. These roll much easier, and I can let the table down on the legs for extra stability if needed. Installation was simple enough. As others have mentioned, there may be a slight learning curve with your first caster as the instructions (or rather lack thereof) are unclear. But after learning and seeing the process, it is easy enough. The included fasteners are of decent quality. I pre-drilled all the holes and none of the screws stripped out when installed with an impact driver. But I’ve had enough experience with these types of products to see that if you did not pre-drill, these would almost certainly strip out. The included “disposable wrenches” are actually of quite high quality. I had an entire workbench full of wrenches and sockets sitting 6 feet away during installation and I just kept using the included “disposable” tools. Sometimes tools like that are terrible but in this case they are excellent for this specific application. After installation, I tested both tables rolling up and onto some thin carpet. The re-purposed casters struggled. These did so easily.

I purchased these retractable castors to add to a large workbench I was building for my garage. The casters didnt disappoint. They are extremely well made and cope very well with the weight of the bench. They lift the bench with ease and its a breeze to move it around the garage on the 3" wheels I cant recommend them highly enough and wouldnt hesitate to buy them again

I have these wheels under my workbench which is 200+kg. It so nice to be able to lift and move it on my own. The wheels were very easy to install and run smoothly. The only problem I have with them is that they stick out quite a lot, even when retracted. I often hit my toes against them when I walk around my bench. If there is space for the wheels (and your foot!) I recommend installing them on the inside of your bench.

Product is very well made. Solid built, with ball bearing wheels. Would buy these next time I need them.

He abierto el paquete y comprobado por encima y todo parece estar bien. No he querido sacar las ruedas y accesorios porque no las voy a instalar ahora, sino estas vacaciones de verano en que haré el banco de trabajo. Viene todo tan "encajado" en su sitio que si lo saco luego no voy a ser capaz de volver a colocarlo tan bien y la caja no cerrará. Bueno a lo importante: de la inspección somera puedo decir que se ve un material de buena calidad y completo. No creo que tenga problemas con el producto una vez instalado.

The product came with a template for installation which made things easy. The casters work great making my work bench easy to move. I Highly recommend this product.