Aqara Vibration Sensor, Requires AQARA HUB, Zigbee Connection

Installed on the from of the microwave so when the door is opened it triggers Home Assistant to switch the microwave on.Had to turn the sensitivity down from the default "high" to "low" as a high pitched bark from the dog would otherwise be enough to trigger it! Still get the odd trigger when no ones near it or even in the same room, haven't figured out why that is yet, but for the most part it does what I purchased it for.As to battery life, it's still showing 100% after 2 months of use.

The Aqara Vibration Sensor integrates seamlessly with Home Assistant, offering a smooth and hassle-free setup. It's compact and unobtrusive, fitting easily on windows, doors, and even my letterbox without standing out. The response time is quick, and configuration is minimal. Whether you’re securing entry points or keeping track of mail, this sensor does the job effectively. For anyone looking for a reliable, easy-to-use vibration sensor, I highly recommend this one.

I was using Zigbee2MQTT with a SONOFF USB Zigbee Dongle and couldn’t get this sensor to work reliably. Pairing worked but it was constantly missing sensor data and was generally being unresponsive.

No hub required if running a Zigbee coordinator like DeConz in Home Assistant as I am. Just pair and go.Not as sensitive as I'd hoped it would be, so no good for my intended use which was to detect when the tumble dryer is running. Maybe this 20+yr old re-branded Creda sheet metal monstrosity is actually super smooth running because when stuck to it this sensor stays fast asleep. Give it a tap and it's awake, but not if there's the vibration from the motor. It's now on the underside of my office chair so I can see roughly how long I spend at my desk. And I had no luck changing the sensitivity.As an aside, I used an Aqara window sensor and a 240v coil relay connected to the dryer motor power feed. When the motor is running the relay opens the connection (reed switch removed) and there it is 'Running' in Home Assistant.

Got this to add to my Home Assistant setup, for detecting shaking from my washing machine. I had to set it to high sensitivity to react to small vibrations but it works. Do not forget to change the time for the reset of the vibration sensor for continuous vibrations such as a washer.Works perfectly with my sonoff zigbee stick, instantly paired after holding the button on the small sensor. I really just expected this to be a vibration sensor and that's it, but oh my, it is a Temperature sensor too!This small guy reports Temperature, Vibration, Motion and the Angle it is at!? This is a great little device to have around!I am using Zigbee2mqtt with mosquitto and HomeAssistant, and as soon as Z2M picked it up the entity was visible in HomeAssistant with all sensors reporting almost immediately. Why almost you ask? Temperature and Battery took a little while to come through as it only reports every 5 minutes or so.Overall I am very satisfied with it, the only small thing is the packaging, its oversized for such a small device, lots of paper waste. But otherwise works wonderfully and will certainly buy more in the long run!

I hoped I would have a better experience with this sensor than other purchasers but sadly not. As others have said, even set at its most sensitive, this sensor detects vibrations inconsistently or not at all. The best I could manage was to get it to sometimes detect the beginning of a vibration but never to register the continuation of that vibration which meant I couldn't use it as planned to detect when a pump is running. I returned the Aqara and purchased a Third Reality vibration sensor which is having no trouble detecting when the pump is on.

Bought these for two purposes. 1, to know when the washing machine finished a cycle. 2, to know when someone knocks on the front door instead of ringing the bell.This device failed in both scenarios. Literally hitting the vibration sensor itself rarely triggers a detected state. You have to pretty violently shake it to trigger a detected state.Paired it with Home Assistant.

I don't know if I mentioned this before, but I love Aqara devices. They just work efficiently and effortlessly. I've got door sensors, temperature/humidity sensors/vibration sensors all from Aqara. For me they are only way to go for home automation and especially good integrating with Home assistant without a hub through ZigBee. Top notch stuff. Thanks Aqara

Le capteur de vibration Aqara est une solution intelligente pour savoir quand le facteur passe mettre du courrier dans boîte aux lettres. Son association avec le Aqara Hub est essentielle pour son fonctionnement. Une fois configuré, ce dispositif devient un atout idéal pour surveiller toute activité indésirable. Sa sensibilité aux vibrations en fait un choix parfait pour la surveillance de votre boîte aux lettres, vous alertant immédiatement via votre smartphone en cas de mouvement suspect. L'intégration avec HomeKit en fait une option encore plus pratique, vous permettant de gérer facilement la sécurité de votre boîte aux lettres depuis l'application Maison d'Apple. Cette combinaison de fonctionnalités offre une tranquillité d'esprit inestimable pour protéger vos courriers importants. Si vous possédez déjà le hub Aqara et que vous cherchez une solution fiable pour surveiller votre boîte aux lettres, ce capteur de vibration, compatible avec HomeKit, est définitivement une excellente option.

このセンサーは、新しい郵便が届いたことを知らせてくれる用途で使っています。郵便受けのフタに取り付けて、誰かが投函するとすぐに通知が飛んできます。さらに、HomePodと連携して、新着の郵便を感知したら1分間の自然音を流すように設定しています。スマホが手元になくても気づけるので、とても便利です。

يشتغل مره وعشر لا

Extremt bra komplement till att bygga sitt egna smarta hem.

Tenía dudas de si serviría para proteger un cristal pero el sensor se comporta bien. Para golpes no es demasiado sensible, algo que está muy bien porque no reacciona a golpes leves o al viento, pero sí a un golper fuerte con intención de romper el cristal. Responde bien incluso si lo pones en el interior y se golpea por fuera un cristal triple como es mi caso.Sin embargo, sí es muy sensible a inclinaciones, o sea que otra buena utilidad, por ejemplo, es ponerlo en la puertita de un buzón para ser notificado cuando el cartero te deja algo. Yo lo uso con Home Assistant y el coordinador Zigbee Conbee II y va estupendamente.La única pega es que es un pelín caro, teniendo en cuenta que otros sensores de Aqara (como los de apertura de puertas/ventanas) cuestan casi la mitad.