Electriduct Wire Loom Cable Insertion Tool for 3/4" to 1" Conduit Sleeving Installation - Model CM15

I knew how much of a pain wire looms are, so I tried these, they work great for the wires that I needed to cover. The wires that you need to cover need to fit into the tool. So, while you are stuffing wires and pulling this tool down the loom it is pretty easy, it just takes a min to get the hang of it, but not too bad for me at least.

This is a well made product that was very useful on split loom conduit. I used it for a plenum fiber run

I have 3 or 4 different sizes of these from like 1/2"-to-7/8" up to this 1-1/2", and each makes working with split wire loom cable wrap or split braided sleeve wire wrap a breeze and definitely less painful! The smaller ones are a bit fiddly in my large hands but still easy enough to work with. Once the wires are in the tool and locked in and the sleeve/loom is prepared on the parting nib, feeding the wires into a sleeve is as quick as it takes to pull it thru your hands. Highly recommend for home and professional installers. Why this brand and design? If you look around, you can find cheaper items but they don't have the nice benefits of all the thought that went into this design: 1 - twist open/twist lock quick loading of cabling into the tool without concern for how big the cable-end connector is; 2 - (assoc. to #1 above) By only working with the cable jackets and not the end terminators, this tool allows for quick determination of whether all the cables will fit in the loom or if the next size up or down should be used. 3 - Light weight and compact. 4 - Ease of use

Makes installing split loom much easier. Only issue is that it is a bit tight fitting onto wood in the smaller sizes

I use this for covering my oxygen hose so my cat doesn’t chew it. It is hard to find a solid 50ft section at a reasonable price. Will buy again.

I didn't know these existed. A co-worker saw them and suggested I take a look. I ordered right away and am disappointed that I didn't have them earlier. What a great product and time saver.

I was surprised, when this arrived, at how small the thing is over all. It is TINY. Given the 1/2 ID of the loom I am using, I guess it cannot be large. But I was surprised none-the-less. It seems to work well for my simple needs - getting a loom over a fiber optic cable installed poorly outside my house for 25 feet or so. It helps to have another person on the end going over the cable to pull the loom along slowly. I don't know how many time this will work before the plastic wears through. But I don't need much lifespan as I hope to do this only once.

I've been putting cables into pet-chew-proofing sleeves that are rough and scratch my fingers. This protects my fingers, and makes the task SO much easier and faster - less than 20 seconds per power cord now. Just slip the cord into it, zip the tool along the length of the chew-protector sleeve, and you're done!