OMT 3" 4" 6" 8" Gear Puller Set, 3 Jaw Puller with Reversible Jaws

These are heavy good quality have already put them to a good test where it probably should have broke but it held up with no problems

I never write product reviews however this one 100000% deserves it. Long story short I got a 5.7 Hemi in my Charger (everybody loves those Hemis iykyk exactly why I needed these). After spending HOURS of my Saturday I'm talking from 7 in the morning till like 4:30 PM….and spending $60 on a 2-ton jaw and getting nowhere and actually sheering one part of the claw itself just to return it for a $70 5-ton to then returning that one to get a dedicated inset crank puller….that didn’t even fit btw because Dodge that makes sense….I bought this for less than all of those tools COMBINED. Used one of the jaws from this pack and it took me no more than 10 minutes and not even a scratch on the jaw at all and it took absolutely zero effort to use this thing. 10000% recommend for anyone not trying to chop an arm off and sell it just for a single 5-ton at autozone.

I've used them a few times now, so it's finally time for a review. First of all, I've worked as an industrial mechanic for decades (electric motors and various machines and such), and I've pulled something around a thousand bearings, pulleys, couplers, ect .. with every type of tool under the sun. In the months since I got these admittedly there haven't been any really good fights, everything I pull at my new workplace has been an easy pull. But that does raise a question as to wether some of these things would have come off harder with other pullers....like maybe these are exacting enough to pull more straight than other pullers or just dumb luck? Anyway, the quality of these doesn't appear overwhelming at first glance. They look like upper tier Chinese tools, but they feel much nicer. The lead screws are smooth (I probably should grease them a little now that I think about it), and the bolts for the arms stay where I put them, not too tight to move or so loose they flop around. All in all, I've no regrets - especially at this price. I wish the branding didn't look like such a blatant OEM Tools rip-off, because they can hang just fine as they are. I've also purchased a bearing separator and H-block set from OMT as well and my opinion of their tools stands for both that and the (3) 3-jaw set I have.... Do it, they're worth more than the asking price!

This product is robust enough for routine hobbyist applications. I changed the bolts and nut to locknut configuration (personal preference). The fitment is adequate, some binding due to casting irregularities, normal use and wear will improve the performance. It could be addressed with a die grinder, but not required for use. I like it, well worth the cost.

Used these to remove a very stuck belt pulley, and a couple of seriously corroded on bearings. Went a lot better than I thought it would. Plenty of leverage - wasn't even very hard turning the jack screw with a socket wrench. The pullers are made of hard steel. Not a mark on them when I finished the job I got them for. They come only partially assembled. No tools required to finish assembly. They can go together several different ways for inside or outside pulling, longer or shorter legs, and two different jaw types. Good set.

More robust, and heavier, than I was expecting for this price. These 3-leg pullers came partially disassembled, but they were so easy to quickly put together. I ordered these because my lawnmowers blade adapter had deformed and was stuck onto the shaft. No matter what I tried, I could not get it off. Once I attached the 6-inch puller, the fine threads made turning the screw effortless and the adapter came off in less than a minute. What a time and energy saver! A great addition to my toolbox to have if ever needed again

Rock Solid Product with top tier perfect performance and flexibility. Very good value.

At first these appear heavy duty. They aren't. We damaged two of them right off the bat trying to pull a harmonic balancer. A normal balancer puller would not fit, and these fit perfectly, but they could not take the pressure. First the bolts on the links broke, so I replaced them with grade 8. Then it literally ripped the links of two pullers apart. I had to fabricate more links to even continue and finish the job. Somehow I just feel like the bolts and links should not be so weak. Did they even test this product for it's intended use?? I've no doubt the bolts and links have failed for other customers. The adjustability is decent, and functionality is reasonable, one repaired. I'm giving it a 3 only because I shouldn't have to install gardened hardware and make new links.. At least the arms held up. It would have been a 4 had the bolts done their job.

Muy buen producto excelente gracias

great tool

The pullers may not be as heavily built as the tools of yesteryear, however, their fit and finish is exceptional particularly for their reasonable price and more importantly they work! The 8” puller was immediately put to work pulling off both rear bearing hub assemblies on our BMW X3 and it did the job with ease. The three jaw design certainly makes setup and operation more convenient than my two jaw pullers. Great tools at a reasonable price! I couldn’t be more pleased with this purchase!

Worked well come with many different sizes. Seems like a good product

Buen producto