MC1 M.2 SSD cooler, efficient cooling for M.2 2280 SSDs, supports single- and double-sided modules, PlayStation 5 compatible, premium black design

Excellent product, easy to put together with my M.2 SSD and appears to be doing the job it's designed for. This is being used inside a PS5 Pro and I haven't had any problems with the SSD.

What a nice product. Easy to follow instructions and screwdriver that works for full installation process in a PS5 provided. My Crucial SSD fit perfectly in this, which had no issues fitting in PS5 (and you can replace the PS5 SSD cover on top should you wish to). The screws to secure the heatsink are tiny, but work in a bright environment, and magnetised to provided screwdriver, and you should have no issues. I like that they are packaged in a compartment behind tape, it's little touches like this that make sure nothing goes missing. Drive works OK with no overheating, though I'd expect it to anyway - however other reviews here shows it is effective in keeping temps down. For a similar price to many cheaper products, provided with rubber bands and the like, this is way better and still provided at a good price. Highly recommended.

Design is unobtrusive, installation is as easy as 4 screws put in. The thermal pads are forgiving, so you don't have to put it on your ssd with 0.1mm precision. Having an NVMe Samsung 980 evo just a slot above a GPU monster made it heat up to ~60 C under full GPU load, with this cooler, you get 55C - that's 5C less. The screwdriver is included, it's fairly neat. MC1 PRO gives you performance of coolding down to 53C, so the price difference is justifiable. PRO versions is a lot thicker but headpipe isn't visible once you put it into motherboard. Handles top-end GPUs well, couples even better with stock/top-down air coolers.

Definitely has reduced my temps on Gen4 SSD compared to not having it installed but still can overheat if push it constantly but last longer than not having it.

Very well built with double sided sticky stuff. Comes with a little screwdriver. It looks quite cool, I think.

After the Cheep brand I used before failed to cool my Samsung 970 Evo plus, using this Be-Quiet Heatsink worked really well. My MNVe went from 68°C idle, 78°C full load with previous heatsink to 52°C idle and 63°C Full load Instructions are very clear and easy to follow to assemble and a free screwdriver too which is incredible handy

I added this heatsink to a Sabrent 1TB Rocket drive as it seemed to be throttling under continued heavy use. The temperature of the drive has dropped by some 15 °C, measured with a quick read of 500 GB of data, so if anything this heatsink is too good! Installation was easy, and it doesn't take up too much space: mine is used on the M.2 slot between the CPU and the PCIe slots on an Asus Prime Z390-A motherboard and it doesn't interfere with the graphics card.

Easy to install and keeps my gen4 nvme under 50deg most of the time. Better than most heatsinks supplied with a motherboard.