ProSensor M150/X990 9-Sensor Stud Finder, AC Wire Warning

This product works really well! I am impressed how well it finds electrical wires in the wall. Super easy to use and the quaility of the stud finder is good.

It's only been a day since I've had it, but it's exactly what I needed. No frills, no fuss, no headaches, just works. Shows the left and right edges of a stud and of course, the exact middle of it. Shows where electrical lines may be, so you don't accidentally shock yourself. If there's any updates, I will post it.

Accurate and Works as intended , kind of bulky So far the electrical sensor upgrade has done good

This is a really good stud finder but I'm knocking it down a star because it does not come with a battery. I feel like, for the price, they could have included one. Maybe I didn't read the listing when I ordered it but I didn't notice it mentioning that. The sensor itself is very reliable and I've really enjoyed using it. One big advantage it has over traditional stud finders it the multiple lights basically show you the exact width of the stud behind the wall so there's no guesswork when it comes to deterring where the edges are. It feels good in the hand too so I think it will last me quite a while. Recommended.

This product actually does find the center of the 2x4 and the ends. Great product.

Stud finder’s are a tool every person should have in their toolbox, whether you are a tradesman, handyman, or DYI. As for myself, I am handyman and invested in about 3-4 of them. The reason I decided to try this brand is the previous brands would detect a stud but it was hard to find out where the center was. This is very important because when installing or hanging something, you want to be in the center because the item you are installing can dislodge from the stud and cause damage to the home. In my opinion, THIS BRAND IS THE GREATEST and you will not purchase another after using this product. I speak so highly of this product because of its consistent accuracy of detecting the stud and reveals the center. You actually see the light bar detect the edge of the stud, and then as you maneuver the device, it tracks the stud until you notice a green light, which is the center of the stud-mind blowing!!!! I built a simulated wall with studs, electrical wiring, and sheetrock. So, I did not conceal all of the studs with sheetrock, therefore I could witness exactly what the device is monitoring. I placed the device on the sheetrock and maneuvered side to side, as if I am looking for a stud on a finished wall. As, I reached the edge of the stud, the light-bar illuminated red, which indicated the device had detected the stud. As I continued towards and over the stud, the light-bar continued to illuminate and tracked the stud. However, as I reached the center of the stud, there was a green light in the middle of the device. This product revealed the green light 10/10 tries and every attempt was directly in the center….did I hear someone say marksman! Another impressive feature of the product, “MX150/X990 with live wire detection,” there is an amber lighting bolt on both sides of the device, therefore it can detect live wires. To test this feature, I wired an outlet on two different studs and on opposite sides (left and right), So, not only did the green light reveal the center but also the side the electrical wire was secured. Shockingly, 10/10 times, the amber lighting bolt was correct every time I maneuvered the device close to the wire or over the stud. The product arrived in a small box and neatly seated inside a plastic wrapping with instructions and a thank you card. The instructions were easy to read, clear to understand, and imprinted on the bottom of the device. Once, you remove the item from the box, there is a black cover, and on the left side, there are about 3-5 lifted lines. You gently push away from you and don’t go too fast because on the oppose side of the removable cover are slide inserts, which can break if you are not careful. The product is very durable and thoughtfully constructed. So, nothing should break unless you handle the product very aggressively. As the instructions state, the product does not get shipped with batteries, so you will have to purchase or if you have some around the house, you will need (2xAAA) batteries. After inserting the batteries, reinsert the battery cover, and you are ready to go. Above the battery cover, the handle has 3 wavy indents which are purposely designed for your fingers, typically the index, middle, and ring ringers. Below the handle is a small arch with lifted lines, which is designed for seating your thumb. Now, you have a full grip on the device and it will not fall. After, you have a comfortable grip position on the handle, compress your three fingers and you should notice the device do a quick flash of the led bars. After, you will have to test the device. Do so by compressing the device with your three fingers and with the opposite hand, not holding the device, way you index finger under. You should notice the led bar tracking your finger. Your finger simulates a thin space then density, just like a finished wall with studs-Genius! Once the device is able to track your finger, now you can test the device on the walls and find those studs. Just an fyi, the product was thoughtfully designed to operate ambidextrously (both hands). I was able to hang pictures, televisions with brackets, electrical outlets, and basically anything you want to hang on a wall which you will fasten into the stud. Each attempt, the device pinpointed the of center of the stud and I did not have any self doubt. Overall, I am extremely impressed with this product and very happy with the purchase.

This stud finder works well most of the time. I’ve only used it through mostly 1/2” and some 5/8” drywall to detect 2” wide wood studs. Five LEDs light up simultaneously to show where a 2” stud is located and when the center LED is in the center of the stud, it turns from red to green, a pretty cool feature. I cannot attest to how well it detects metal studs. The feature to detect live wires was pretty reliable though reliability seems to depend somewhat on how far from the drywall the electrician stapled the wire on the stud. Since I bought this device to primarily detect studs, I consider the live wire detection a bonus. When trying to detect a stud in a location where you can’t center the finder over the stud (such as when you’re looking for a stud right next to a window or door frame), this stud finder will light up the LEDs at the end of the finder but not until the LED moves past the edge of the stud by about a quarter inch. I was able to test all of this on a basement interior wall that had drywall only on one side of the studs - perfect for seeing how accurate this finder is. This stud finder is well made and easy to use and grip with one hand. I do believe however that it might not fare well being dropped on a hard floor (I wasn’t willing to test my theory). The surface that slides on the wall has two teflon-like strips on it that make sliding across drywall very smooth. The unit uses 2 AAA batteries which were not included. It is also always calibrated immediately after turning it on, even if you turn it on before putting it against the wall. Overall I’m satisfied with this device. I believe anyone that has ever used an electronic stud finder with only one or two sensors will truly appreciate the 15 sensors on this Franklin ProSensor M150 / X990 stud finder.

Sometimes there are inconsistent results so double check for studs with magnetic stud kinder.

Why is Franklin products so hard to get a hold of in Europe? .. this device is everything I wanted for a stud finder

I’ve tried a few stud finders before and this one is much better and far more accurate. It detects the full width of the stud rather than just the edges, which makes it much easier to see exactly where to drill. Very simple to use with no complicated calibration, just place it on the wall and move it across. The display lights up clearly when a stud is detected. Overall a very reliable tool and a big upgrade over cheaper stud sensors.

Very happy with my purchase. It's the perfect tool for a part time DIY enthusiast. It's easy to use, and I really like the green light feature that lets you know when you're in the center of a stud. The product itself feels well made and of good quality.

fungerar kanon!

Precise measurements every time, as advertised