EZDIY-FAB 309EZ ARGB GPU Holder Brace, Graphics Card Support Bracket, Black

A nice sturdy aluminum (I believe) additional bracket to support your GPU that has addressable RGB lighting, and a nice straight line / 45° angle aesthetic. Perfect for those builds where you want to avoid any circular RGB to achieve an all straight line RGB build. A good value, a great fit, and definitely a boost in performance! I got at least 60 more FPS just by adding this RGB bracket! (Sarcasm) but seriously as far as performance goes it doesn't hinder air flow and it does support the GPU so I would say it performs as expected. It mounts into the expansion slot at the rear of the case below the graphics card mount, therefore it can have multiple adjustment points, I think I installed mine one notch too low but that's okay it allowed me to route the wire between the GPU and the bracket to avoid covering the RGB. With multiple mounting point options based on your expansion slots, and two different height support bracket end pieces, this bracket should be adequate for most cases and cards. Based on the build quality of this piece, I give this company props, and will probably return to them for additional accessories. Recommended!

Sturdy and stylish, I feel the clean lines will go with nearly any case and GPU. It's a katana, a lightsaber, an industrial beam, an aircraft component- depending on how you look at it against your build theme. The bracket also looks great with a variety of GPU designs, from straight boxes to contoured shrouds. The LEDs are of surprising quality for the price, and color match with my Corsair QL fan colors flawlessly; as well as being some of the brightest LED in my case. The strip does work with ICue, and in my case, I just have a bunch of stuff on an aftermarket ARGB hub- connected to a Commander Core XT- and it all defaulted as 3-pin LL Fans (not strips) in ICue and it just works. Even the logo is placed well and looks good, which is a dealbreaker for me sometimes. I bought this in anticipation of a heavier Sapphire Nitro+ 7800xt in transit; but in my images, it is doing a good job with my Zotac 3060ti, which isn't much lighter. No complaints here at all. This is a great bracket for the price, and EZDIY-FAB has become one of the names I trust to put out a good product.

Does what it's intended to do. Feels sturdy and not cheap either. I didn't have any issues with the riser cable when using my rtx 5070 but I did upgrade to a 5070ti now im getting a occasional black screen at boot...I don't think it's a riser problem but the jury is still out

This bracket does what it should and looks amazing but I had to 3D print my own part that contacts the actual GPU. The 2 that were supplied were too long. I am using an ASUS RX9070 XT.

I didnt have much hope. I dont recognize the brand. My though was that even if it doesnt work the purpose is to support the graphics card and having LCD elements was a second objective. But, its great. It looks amazing. Installation was easy. A great, cheap, way to upgrade the look of your PC AND help keep that expensive card and motherboard safe.

I built out my rig and got a nice RTX5070 only to find that it was slightly drooping on the end. The card is in the right slot on the motherboard for the best speed but way to far away from the computer case for the little support that comes with the card to be useable. This solution covers two rear external slots but in my case I didn't need those two expansion slots. The ARGB has 32 LEDs which are addressable through the iCUE commander but the commander cannot manage them as one continuous set of LEDs. Instead I have to tell it that it is a Corsair ARGB fan with two sets of LEDs so that half of the bar is one set and the other half is the other set in the software configuration. I had originally thought that it would look nice to tie the LEDs to sound. But with the way the iCUE commander manages the LEDs it acts like two sound bars stuck end to end. But it really looks nice in the case and it does a good job of supporting the video card.

It was a good design and I think worth the money but unfortunately it didnt fit in my pc so I had to send it back

Holds it up and works.

Easy to install and sturdy support for my GPU, totally recommended!

I really like this brace! It's sturdy, easy to install, doesn't interfere with other things (I have a USB expansion card and the bracket attaches over top of it easily) and really pretty as a bonus. I've only got a 3060 so it may be a bit extra, but I like it. Unfortunately, the leftmost LED on mine is ordered incorrectly, so when I make the RGB do cool stuff, it's never the right colour. I didn't notice this for several months because until I got a new motherboard with ARGB I didn't have the RGB plugged in. It's not the end of the world, just something to note! I still really enjoy the brace and I feel like it ties the look together really well. (and yes I just realized I installed my CPU cooler upside down don't laugh at me I'm upset and not redoing the thermal paste a third time lmao)

**update** Does not fit Gigabyte RTX 4070ti Master gpu, just hits the fans. But great for 5700xt and many others! So if don’t have above card, a great buy. **** Was hesitant to order one, but after my 3d printed one broke and my printer currently also broke, I had to buy one.. This was super easy to setup and install, fitted in my be quiet silent base 802 case with a xfx rx5700xt thicc iii ultra. This is a big, 3 slot 315mm long card. The bracket is sturdy, solid and holds the card up perfectly with 0 sag. The stand with pad on doesn’t affect fans of gpu in any way. The argb lighting works and looks beautiful! Synced up to my gigabyte argb header via be quiet argb hub. Really happy with product. Only wish it didn’t have a logo on it.

Bought for my 4070, there are small slots for the screws to go in which can adjust based on the height you need. It gives two supporting joints to put underneath. Supports my card well and looks nice.

ووصل خربان